Revealed Comparative Advantage, Intraindustry Trade and the US Manufacturing Trade Deficit with China

This paper uses 4‐digit SITC data to identify groups of manufactured goods exported from China to the USA that have strong or rising comparative advantages. We find that most of the trades are inter‐industry, with only a small portion being vertical intra‐industry trades (IIT). Our results confirm that Sino‐US trade is complementary. We construct an imbalanced index of IIT, and identify the goods groups that aggravate and reduce the US trade deficit with China. We suggest an approach for calculating a dynamic IIT index that might mitigate the aggregation bias of the existing methodologies. Our improved index reveals that the dynamic imbalances of US‐Chinese IIT in manufactured goods are worse than their static IIT imbalances, which means that it would be difficult to correct the deficit of US trade with China in the following couple of years. Adjusting and improving the structures of industries and products is China's major task for sustainable trade growth.     

Democracy and foreign direct investment at the industry level: evidence for US multinationals

Theories of multinational enterprises emphasize that foreign direct investment (FDI) is undertaken in different industries for different reasons, yet studies of the effects of democracy on FDI most commonly use aggregate-level FDI data. This paper evaluates US FDI outflows to 15 industries (eight manufacturing, seven nonmanufacturing) in 54 countries in a linear dynamic panel-data gravity FDI model using a “system” generalized method of moments estimator and three widely used democracy indicators. At the aggregate-level, we estimate a positive effect of democracy on FDI, consistent with most prior studies. At the industry level, we estimate larger positive effects of democracy on FDI for service than manufacturing industries, particularly for finance and insurance and information, and negative effects for mining and oil and gas extraction.     

Patterns and determinants of intra-industry trade in Asia

Intra-industry trade (IIT) has gained in importance across Asia as a result of the rapid growth of Asian economies and their key role in the international fragmentation of production. This paper examines the level of IIT for 22 countries in East, Southeast, South, and Central Asia in 2003. IIT is measured as a multilateral trade-weighted index and is reported for ten different categories of goods in the primary and secondary sectors. In addition, the determinants of IIT are investigated using a Tobit regression model. The results indicate that ASEAN and the high-income countries in East Asia exhibit the highest levels of IIT, followed closely by China and India. R&D spending, openness, and a higher share of manufactured exports were found to promote IIT, while geographical distance and the difference in economic size had an adverse effect, especially for manufactured goods. The ASEAN free trade area was most prominently associated with IIT across all SITC categories. Central and South Asian regional trade agreements had a positive influence on IIT in primary products.     

Study of the Measurement and Determinants of Intra‐industry Trade in East Asia*

The present paper investigates the development of intra‐industry trade (IIT) among the East Asian economies over the 1970–1996 period. A dynamic index is used to capture the changes in the structure of trade flows. Based on this approach, IIT is decomposed into horizontal (HIIT) and vertical components (VIIT) and the determinants of each are investigated. The results show that both HIIT and VIIT have exhibited increased importance over the sample period in manufacturing. Using pooled panel data the two‐way trade in all measures of IIT is found to be positively related to the country‐specific variables, such as the market size, exhange rate depreciation, the levels of development and income, and negatively to the geographic proximity of the partners. Economies of scale are seen to have a positive influence on IIT and HIIT, but a negative relationship with VIIT. Although the relative openness of a country's trade regime shows no significant relationship with any form of IIT, a trade imbalance does affect IIT and HIIT flows. The findings have implications for assessing the structural adjustment costs associated with the trade liberalization process as HIIT is associated with demand for variety and relates to two‐way trade in goods of similar quality, while VIIT is driven by international specialization and differences in relative factor endowments.     

The nature and causes of intra-industry trade: Back to the comparative advantage explanation? The case of Spain

The Nature and Causes of Intra-Industry Trade: Back to the Comparative Advantage Explanations? The Case of Spain. — The aim of this paper is to contribute empirically to the knowledge of the nature and causes of intra-industry trade (IIT), distinguishing between vertical and horizontal IIT. To this end, we estimate a more general empirical model than those used in previous studies, by introducing simultaneously both national and industry-specific variables which include measures for human and technological capital endowments. The results show that vertical IIT is positively related to industry technological intensity and differences in human and technological capital endowments between countries. On the other hand, horizontal IIT is explained by the traditional monopolistic competition model.     

中日钢铁产业内贸易及影响因素实证分析

为了研究中日间钢铁产业内贸易及其主要影响因素,首先,选用相关指数和方法对1990～2009年两国钢铁产业内贸易水平进行分类测量发现,中日钢铁总体产业内贸易水平呈波浪形增长,产业内贸易模式以垂直型产业内贸易为主;其次,运用时间序列分析对总体产业内贸易、水平型和垂直型产业内贸易与各影响因素分别进行了协整检验和Granger因果检验,在实证结论基础上文章提出重点应在优化出口产品结构、提高市场集中度、提高自主创新能力等方面努力。     

Intra-industry trade of India: Trends and country-specific factors

Intra-industry Trade of India: Trends and Country-Specific Factors. — The analysis in this paper confirms that trade liberalization biases trade expansion towards intra-industry trade (IIT) in India. The increased level of IIT is largely exportled, that is, caused by a faster growth of exports than of imports. India’s IIT is more intense with high-income countries and is characterized by a greater extent of complementarity. Further, certain country-specific factors which are found to be crucial in the models of vertical IIT are pertinent in influencing the pattern of India’s bilateral IIT.     

The role of comparative advantage in trade within industries: A panel data approach for the European Union

The Role of Comparative Advantage in Trade within Industries: A Panel Data Approach for the European Union. — A large share of EU member states trade is intra-industry trade (IIT) in the period 1985-1996; in particular, IIT is based on products differentiated in quality (vertical IIT). Moreover, exports from southern countries are located mainly at the lower end of the price-quality spectrum, whereas those countries with higher per capita incomes are located at the higher end. According to the vertical IIT models, we hypothesize that commercial specialization of members states over the quality spectrum within industries is explained by differences in technological, physical and human capital. The results show that comparative advantage is an important driver of the pattern of European trade within industries.     

How important is intra-industry trade in trade growth?

Empirical work on intra-industry trade (IIT) is almost 30 years old. Initial research sought to identify if IIT was a significant share of total trade (TT). The Grubel-Lloyd (GL) index was widely used for this purpose. Interest has since shifted to the changing importance of IITover time. Using movements in the GL index to infer the importance of IIT over time is not only vague, but can be misleading. In this article, we measure the contributions of growth in net trade (NT) and IIT to the growth in TT. To understand changes in IIT over time, we also derive the contributions of imports and exports to the growth in TT, NT, and IIT. All our formulas are illustrated with data for 205 Australian manufacturing industries.     

On the Measurement of Changes in Product Quality in Marginal Intra-Industry Trade

There is a long established thread of the international trade literature concerned with the measurement of intra-industry trade (IIT). Two distinct strands of the literature have developed: First, measures of marginal IIT that are concerned with the adjustment implications of volume-based changes in IIT; second, measures of vertical and horizontal IIT that are concerned with quality-based differences in IIT. This paper marries the two literatures to provide a new perspective on the smooth adjustment hypothesis debate and suggests the use of the marginal product quality index, a new measure of changes in quality in matched trade changes that complements dynamic measures of volume-based IIT. JEL no.  F19     

The Skill Content of Inter- and Intra-Industry Trade: Evidence for the United Kingdom

In this paper we investigate the relative importance of net exchanges of skills embodied in intra-industry and inter-industry trade for the UK’s trade with some middle income countries. We also separately measure the net exchanges of skills embodied in vertical and horizontal intra-industry trade (IIT). We find that there are substantial factor exchanges involved in IIT, implying that traditional factor content studies may have seriously underestimated the actual factor content of total trade flows. This means that the adjustment effects of IIT may be greater than is often presumed. We also find, in line with theory, that vertical IIT involves similar net exchanges of labour of different skills to that of inter-industry trade, while horizontal IIT involves much smaller net exchanges of skills. JEL no. F11, F14     

Estimating Korea's Exchange Rate Exposure

This paper conducts an empirical analysis of the exchange rate exposure of 392 Korean firms by employing not only changes in the exchange rate but also the standard deviation of exchange rates as foreign exchange risk. A logit model is also used to identify the major factors in exchange rate exposure. The empirical results in the case of using the standard deviation of exchange rates suggest that: the number of firms showing significant exchange rate exposure has been relatively increasing; exchange rate exposure is more likely for export‐oriented manufacturing industries than for nonmanufacturing industries; and large firms using hedging methods are likely to show a low degree of exchange rate exposure.     

Technology,Trade Sensitivity,and Labor Displacement

This study examines the relationship between international trade, technology, and exposure to job displacement, using data on displaced workers as well as those at risk of job dislocation, for the two-year sample periods 1986-1987 and 1990-1991. Workers employed in manufacturing industries with elevated import penetration or high shares of R&D personnel appear to have increased rates of job loss. However, the risk of job loss is materially reduced when a relatively high proportion of employees report working with computers. The opposing effects on displacement probabilities of R&D employment intensity and computer-use carry over to the nonmanufacturing sector.     

THE LINKS BETWEEN TRADE POLICY AND TOTAL FACTOR PRODUCTIVITY IN SOUTH AFRICA'S MANUFACTURING SECTOR1

This paper reconfirms the important links that exist between manufacturing productivity, trade orientation, industry specific characteristics and some macroeconomic variables. The dynamic GMM estimator used in the analysis shows that apart from being affected by trade measures, total factor productivity is strongly persistent. In addition, the evolution of the real exchange rate and inflation exert important effects on manufacturing productivity. Most importantly, the dynamic error component specification appears to be more efficient in modelling the effects on manufacturing productivity of policy change than the static approach.     

Dynamic technological specialization,aggregated convergence and growth

This paper focuses on the contribution of dynamic technological specialization to aggregated growth and convergence. Certain theoretical approaches (Structuralism) maintain the view that being specialized in ‘correct’ technologies helps to achieve: i) sustainable rhythms of long-run growth; ii) accelerated catching up and higher rhythms of convergence in delayed countries. Using an endogenous growth model for a 23 countries sample between 1980 and 2010, the work contrasts those hypotheses by using static and dynamic approaches for technological specialization in comparison to other technological variables. Empirical results do not confirm that any ‘good’ specialization matters to growth and convergence at an aggregated level, neither under static nor dynamic approaches. The key elements to aggregated convergence and growth are more linked to spillovers of technological diffusion and to country-specificities (technological capabilities and capacities, domestic technical efforts, national innovation systems, industrial innovation processes, etc.) as it is pointed out by catching-up theories.     

Earnings Management under Price Regulation*

Price controls¹ have a major impact on firms' earnings and cash flows. Because price control regulation is costly to firms, it is a type of regulatory intervention that can impact a firm's accounting decisions (Watts and Zimmerman, 1978). Thus, regulatory changes that give firms relief from price controls provide incentives for earnings management. This paper examines discretionary accruals made by New Zealand manufacturing firms in response to two sets of regulations issued in 1971 and 1972. These regulations allowed manufacturing firms to apply for price increases to gain relief from financial hardship caused by the 1970 Price Freeze Regulation. Using a modified accruals mode! that adjusts for price-level movements, the paper tests discretionary accruals of two samples of manufacturing firms and one control sample of nonmanufacturing firms. The results provide evidence of income decreasing discretionary accruals by manufacturing firms for the years during which they could apply for price increases. The control firms do not exhibit significant discretionary accruals in 1971 or 1972. Also, this paper provides evidence that failing to adjust for price-level movements in high inflationary periods could result in inferences of income decreasing discretionary accruals where none may exist.     

The Dynamics of Intra-industry Trade in ASEAN*

The decision to establish the ASEAN Free Trade Area (AFTA) by the year 2008 has resulted in producers in all ASEAN countries except Singapore raising concerns relating to potential loss of market share and adjustment pressures. Underlying these concerns is the view that the expected growth in intra-ASEAN trade will be dominated by inter-industry or net trade (NT) rather than intra-industry trade (IIT). If most of the expected growth in trade is intra-industry, however, then the short-run resource re-allocation costs are likely to be lower. In this study, we employ a new methodology to analyse the dynamics of IIT in ASEAN. We overcome problems associated with using movements in the value of the Grubel-Lloyd (GL) index by deriving a formula that decomposes the growth in trade into the contributions of growth in IIT and NT. Our results suggest that the role of IIT in trade growth has been increasing in importance, and thus much of the recent concern that threatens the viability of AFTA may be misplaced.     

Integration and intra-industry trade adjustment in South Africa

This article analyses intra-industry trade adjustment by the Southern African Customs Union after 1994, and links between trade liberalisation and employment are examined. The traditional Grubel-Lloyd index is complemented by marginal inter- and intra-industry trade measures, and trade expansion of sectors is scaled, related to change in total exports and imports. In three different empirical approaches, large differences are found: in the level of intra-industry trade (IIT) between different sectors (categorised into resource-based, labour-intensive, scale-intensive and differentiated industries); in the level of IIT of individual sectors in trade with the SADC6, the European Union and the rest of the world; and in the economic significance of trade expansion for different industries and with different trading partners. Trade expansion is dominated by differentiated and scale-intensive industries, indicating that the main economic gain of international integration is found in the opportunity to exploit economies of scale in a larger market. IIT and marginal IIT are positively related to increases in labour productivity, and negatively related to employment change. Interindustry trade and both export and import expansions are positively related to employment gain, but only export is positively related to increased labour productivity.     

Country-specific factors and the pattern of horizontal and vertical intra-industry trade in the UK

Country-Specific Factors and the Pattern of Horizontal and Vertical Intra-Industry Trade in the UK. - A large number of empirical studies have investigated the relationship between country-specific factors and total intra-industry trade (IIT). One important shortcoming of this literature is that it ignores the distinction between horizontal and vertical IIT and ignores the fact that they may have different determinants. This paper disaggregates UK IIT into its horizontal and vertical components and, using bilateral trade data, estimates a series of models incorporating countryspecific variables. The results suggest that vertical IIT is more important in the UK than horizontal IIT and that the inter-country pattern of vertical IIT is systematically related to a range of explanatory variables.     

Does North-South horizontal intra-industry trade really exist? An analysis of the toy industry

Does North-South Horizontal Intra-Industry Trade Really Exist? An Analysis of the Toy Industry. — In a combination of a case study approach and econometric analysis, bilateral intra-industry trade between high income countries and low income countries in the toy industry is investigated. In a number of products there is important bilateral intra-industry trade between both groups of countries. Econometric analysis in which a number of the explanatory variables used were quantified on the basis of the information supplied by the industry-spokesmen yields results which strongly support the view that the bilateral IIT between the high income countries and the low income countries in the toy industry is determined significantly by horizontal product differentiation and economies of scale.