The influence of market structure on technological performance in the food-manufacturing industries

This paper tests the effect of firm and market structure variables on the rate of R&D investment by food processing firms. While the estimated relationship is consistent with the hypotheses of Schumpeter and Galbraith at small firm sizes and small-to-moderale concentration levels, above these critical values expected firm R&D increases at a decreasing rate with firm size and decreases with market concentration. The second part of this paper examines the origins of process patents closely related to six food industries. On average U.S. firms outside the industry, foreign firms, and individuals were each assigned more food-industry patents than were U.S. food processing firm. These findings place the public policy interpretation of observed relationships between market power and firm technological performance into a broader perspective. Even if a reduction in market concentrationn reduced R&D originating within a food industry, this decrease might bede minimus relative to technological changes, originating outside the industry.     

Nature of the R&D/Marketing co-operation in the design of technologically advanced new industrial products

Many studies have consistently reported that success in industrial new product innovation is linked with the degree of interfacing between R&D and Marketing in the early stages of the product development process. However, very little evidence of such an interface has been reported in advanced technology firms and the relevant literature provides little empirical material on the matter.
Based on a pilot study of 23 new product projects in ten firms in the U.K. it is argued that, in many instances, firms are missing a fundamental issue in the R&D/Marketing cooperation. Too often, the interface is limited to the identification of general market need for a particular new product idea.
The paper emphasises the fact that the interface should provide the means for an efficient product design procedure between R&D and Marketing. This design link should, in turn, profit both the engineering design of the product and its future marketability. The paper also outlines the advantages and the problems inherent in the exercise and proposes a framework for implementation.     

How to leverage the impact of R&D on product innovation? The moderating effect of management innovation

Although research and development (R&D) is a key indicator of (technological) innovation, scholars have found mixed results regarding its effect on product innovation and firm performance. In this paper, we claim that variations in R&D effectiveness can be explained by changes in a firm’s social system, in particular in its management innovation. It is still unclear how management innovation influences R&D effectiveness in terms of product innovation. In this study, we address this theoretical and empirical gap in the innovation literature. Our theoretical arguments and findings from a large-scale survey among Dutch firms show that R&D has a decreasingly positive relationship with product innovation, particularly for firms with low levels of management innovation. However, in firms with high levels of management innovation, this relationship becomes more J-shaped, especially in small and medium-sized firms. Our findings also appear to indicate that management innovation may be more important for competitive advantage than just R&D. Overall, our insights reveal that management innovation is a key moderator in explaining firms’ effectiveness in transforming R&D into successful product innovation.     

Patterns of international R&D cooperation for new product development: the Olivetti multimedia product

Abstract
The aim of the paper is to identify a number of different patterns of international R&D cooperation during the initial phases of the product development process. This is a case-study of new product development based on the work of the Olivetti Multimedia Laboratory in Pisa, how it set up its own pattern of multinational collaboration in the idea generation and pre-competitive phase; how, in turn, this collaboration led to new R&D collaboration agreements to satisfy specific problem-solving requirements connected with the confirmation of a dominant design, though limited to a certain extent by previous agreements between Olivetti and other firms; the role played by marketing in the choice of alternative solutions. Finally, in the product implementation phase, the emergence of a defined technological paradigm leads to a highly competitive environment, where R&D collaboration is increasingly directed towards multifunctional requirements (R&D, manufacturing, marketing) within a strategic network of alliances that involves large sized companies, start-up firms, industrial and university research units.     

Family Ownership and R&D Intensity in Small‐ and Medium‐Sized Firms

Research was largely consistent in predicting a negative relationship between family ownership and research and development (R&D) intensity until Chrisman and Patel, using a behavioral agency model (BAM), called this general assumption into question. They argued that publicly owned family firms typically invest less in R&D than nonfamily‐owned firms. This behavior may however be reversed if economic performance levels are below family aspirations or if family long‐term goals, such as pursuing strong transgenerational family control, are highly valued. While most researchers, like Chrisman and Patel, primarily focused on large listed firms, more research on the relationship between family ownership and R&D intensity in privately held small‐ and medium‐sized enterprises (SMEs) is required. This is because firm size can play an important role in understanding the innovation management behavior of firms. Building on the BAM perspective, in the present paper it is argued that Chrisman and Patel's results can be extended to the context of SMEs, albeit with one important specification: the relationship between family ownership and R&D intensity is likely to be contingent on the way the family has invested its wealth. Specifically, it is contended that in the context of SMEs, where goals are more fluid and mixed, when there is a high overlap between family wealth and firm equity (i.e., most of the family's wealth is invested in the firm) the relationship between family ownership and R&D intensity is negative because of the family owners' greater desire to protect their socioemotional wealth (SEW). However, if the overlap between the family's total wealth and single firm equity is low (i.e., firm equity is just a small part of the total family wealth), the relationship between family ownership and R&D intensity is positive as the low overlap between family wealth and firm equity reduces the family's loss aversion propensity. In such a situation, family ownership is likely to foster R&D intensity because of the long‐term orientation of family owners that increases the family firm's propensity to bear the risk of investing in R&D activities. The hypothesis is tested and confirmed in a study of 240 small‐ and medium‐sized firms based in Italy. The paper contributes to the literature in several ways. First, adding to the literature on innovation management and R&D intensity, it increases the understanding of what drives or inhibits R&D investments in SMEs when a family is involved in the ownership of the firm. This is particularly important because research on innovation management, as well as research on R&D intensity in family firms, is primarily focused on large firms and much less on SMEs. Second, the study complements arguments from prior research on the correlates of R&D intensity in large listed firms, showing that the BAM and SEW perspective offer a theoretical framework that is also able to illustrate the complex nature of innovation management in the context of SMEs. Third, the study contributes to research on the effects of family ownership on the general functioning of a firm. In particular, it provides new insights into how family ownership may affect R&D intensity.     

Industry characteristics influencing the technical output: A case of small and medium size firms in the US

Using the small and medium size firms in the US as a sample, this paper reports on interrelationship among patents, publications and new products. Correlates of R&D expenditure, patents and papers and new products are presented. Relationships between firm size and R&D output and productivity are also investigated.
Since the study is based on correlational analysis, causal inferences are not drawn. The data indicates that the three indicators are related, but their strength of relationship varies with industries. Growth of sales is related with new products, but not with patents or papers.
Although the data point to the fact that small firms are more productive than their larger counterparts, there are many reasons to come to such a sweeping generalisation. Reporting of R&D data is not reliable for small firms as the very definition of R&D differs from firm to firm. Nature of R&D also changes as the firm grows in size; opportunities for patents or new products also change accordingly. These make it difficult to accurately measure and compare the R&D efficiency across firms of different sizes.     

Do R&D Subsidies Stimulate or Displace Private R&D? Evidence from Israel

In evaluating the effect of an R&D subsidy we need to know what the subsidized firm would have spent on R&D had it not received the subsidy. Using data on Israeli manufacturing firms in the 1990s we find evidence suggesting that the R&D subsidies granted by the Ministry of Industry and Trade greatly stimulated company financed R&D expenditures for small firms but had a negative effect on the R&D of large firms, although not statistically significant. One subsidized New Israeli Shekel (NIS) induces 11 additional NIS of own R&D for the small firms. However, because most subsidies go to the large firms a subsidy of one NIS generates, on average, a statistically insignificant 0.23 additional NIS of company financed R&D.     

Foreign entry and firm R&D: evidence from Chinese manufacturing industries

By making use of firm‐level panel data from 2005 to 2007, this paper empirically examines the relationship between research and development (R&D) behaviour and the presence of foreign firms in China's four major manufacturing industries. The manufacturing industries considered are (1) car manufacturing, (2) household electrical appliances, (3) electronics and (4) communication equipment manufacturing. We find that the presence of foreign firms has resulted in a significant increase in R&D intensity of all four manufacturing industries in China. While the average R&D intensity in communication equipment manufacturing is the highest, the electronics industry, which has the highest level of foreign presence, has experienced a relatively large increase in R&D intensity. This suggests that China's electronics manufacturing sector is responding to rising competition from foreign firms located in China. Foreign presence in China's car manufacturing sector is relatively small, and this industry has experienced a relatively small increase in R&D intensity because of foreign presence.     

Product–service innovation and performance: the role of collaborative partnerships and R&D intensity

Treating the intersection of the strategic partnerships, R&D intensity and servitisation literatures, this study explores empirically whether external collaborative service development and provision and industrial R&D intensity help to unpack the complex relation between product–service innovation (servitisation) and performance. We argue that manufacturing firms implementing services benefit from strategic partnerships with Knowledge‐Intensive Business Service (KIBS) firms. KIBS partnering provides opportunities for downsizing, externalising risks and sharing knowledge. Additionally, manufacturers in R&D‐intensive industries are more likely to benefit from implementing service provision than firms in other sectors because of industry dynamics and reduced customer uncertainty. The study surveys executives in 370 large manufacturers worldwide. Results reinforce the importance of concentric strategic partnerships to successful product–service innovation in high R&D industries.     

Clustering and the R&D management of high-technology small firms: in theory and practice

Much of the policy assistance for high-technology small firms (HTSFs) over recent years has been directed at encouraging their research and development (R&D) collaboration through local networking and technology transfer. Following a consideration of why HTSFs are formed, and how they perform R&D in order to cope with the competitive environment, this paper explores the value of external collaborative R&D to internal R&D management, inside geographically concentrated incubators, science parks or clusters. It is concluded that, although R&D collaboration with external partners occurs in limited instances, much HTSF R&D is highly confidential, competitive and wholly internalised. This tendency, as far as it relates to R&D management, is significant in that it minimises the likelihood that local management collaboration between co-located firms will improve the performance of R&D projects.     

Financing behaviour of R&D investment in the emerging markets: the role of alliance and financial system

This paper examines the financing behaviour of research and development (R&D) investments in emerging markets. Drawing on institutional theory and using panel data of generalized methods of moment estimation for a sample of 302 firms from 20 countries during the period 2003–2015, we find that emerging market firms tend to use internal funds for financing R&D investments. Interesting results emerged when the sample was divided as alliance and non‐alliance firms, and bank‐based and market‐based financial systems. The results show that R&D financing behaves differently for alliance and non‐alliance firms. Alliance firms use both internal and external funds for R&D investments, while non‐alliance firms do not use external funds. We also document that a country's financial system influences the choice of available sources of finance. Firms from countries that follow a bank‐based financial system tend to rely on external funds while firms from countries that follow a market‐based financial system depend more on internal funds for financing R&D investments. This study is important as it provides new evidence on financing R&D investments in emerging countries taking into account the institutional arguments of financing choices, and so should guide stakeholders about appropriate sources of R&D financing.     

Performance of Japanese firms in patented inventions; an analysis of patents granted in the U.S.

This paper addresses the relation between firm size and R&D activity for Japanese large manufacturing firms using patents granted in the U.S.. Japanese firms loom larger in world R&D agenda; therefore, the examination of the determinants of their R&D activity, in particular, the effects of firm size, may provide a suggestion of R&D activity. The firm size-patent count relationship varies across industry. In many industries, Japanese experience is not in favor of the assertion that there is a return to scale in R&D among large firms, indicating that Schumpeterian entrepreneurship is not likely to take place more than proportinately to firm size. This conclusion is not inconsistent with Schumpeter's theory.     

Strategic control systems and relative r&d investment in large multiproduct firms

This paper hypothesizes that tight financial controls associated with large diversified M-form firms lead to a short-term, low-risk orientation and thereby lower relative investment in R&D. Further, it is hypothesized that increasing levels of diversification require different control systems which have significant implications for investing in R&D. Results of the study of 124 major U.S. firms suggest that less diversified U-form firms invest more heavily in R&D than more diversified M-form firms after controlling for size and industry effects. Additionally, dominant business firms invested more in R&D than either related or unrelated business firms. Finally, the relationship between R&D intensity and market performance was negative for related and unrelated firms. The findings suggest that the market evaluates R&D investment more positively for firms that are organized to seek synergy than for those that are organized to pursue a hedging (or diversification) strategy.     

Product Innovation by Smaller, High-Technology Firms in Canada

Russell Knight has surveyed 124 small, high-technology firms in Canada to learn more about the processes they use to develop and market innovative products. The scope of his survey included an investigation of planning early in the product's development cycle, how products move from R&D to mass marketing, and how firms learn about their markets in very specialized areas. In general, Knight finds that the firms have more technical than general management expertise. Technically trained entrepreneurs have difficulty with general management skills needed to facilitate the successful introduction of new products.     

Persistence in R&D Performance and its Implications for the Granting of Subsidies

We study whether R&D subsidies can be used to encourage sustained R&D performance. To this end we measure the importance of true state dependence (TSD) in R&D performance and of subsidies’ inducement effects. Estimates that are based on a panel of Spanish manufacturing firms that are observed during the period 1998–2009 reveal that both magnitudes are positive and significant. Simulations that are carried out with the estimated parameters show that subsidies can generate permanent inducement effects for 9 % of Spanish manufacturing firms. The subsidy shares that are needed to generate permanent inducement effects among small firms (firms with fewer than 200 employees) are larger than those that are needed to generate permanent inducement effects among large firms (firms with 200 or more employees).     

THE ROLE OF SUNK COSTS IN THE DECISION TO INVEST IN R&D*

We present a dynamic empirical model of a firm's R&D decisions that is consistent with the existence of sunk R&D costs, taking into account that these costs may differ between small and large firms, and among different technological regimes. We estimate a multivariate dynamic discrete choice model using firm‐level data of Spanish manufacturing for 1990–2000. Conditional on firm heterogeneity and serially correlated unobservable factors, we find that R&D history matters. This true state dependence allows inferring the existence of sunk R&D costs associated with performing R&D. Sunk R&D costs are found to be higher for large, high‐tech firms.     

Market share,advertising, R&D,and profitability: An empirical analysis of leading industrial firms in Japan

This paper develops a dynamic model of a leader firm which chooses the time paths of R&D and advertising inputs so as to maximize the present value of expected profits. From this theoretical model simultaneous-equations system for market share, advertising, R&D, and profitability is derived and estimated using the data on the leading industrial firms in Japan. Our results show that, as far as top firms are concerned, market share and demand growth have significant positive effects on profitability, and an increase in the stock of goodwill increases market share as well as profitability.This study was financially supported by the Ministry of Education in Japan. Helpful comments were provided by H. Odagiri. Also I am indebted to an anonymous referee for advice and criticism on various points.     

Small is big in ICT: The impact of R&D on productivity

We examine the contribution of R&D to firm productivity in a large panel of European firms and study its variation with the age, size, and sub-sector of firms. We find that R&D capital in ICT firms has a larger effect on revenue when compared to non-ICT firms. At the firm level, our results suggest that, surprisingly, smaller and older ICT firms benefit the most from R&D. Small but mature ICT firms are likely to dominate market niches, and small size may enable them to be flexible and adaptable which helps them respond to technological opportunities to develop innovative products and services. This has important implications for public policy based upon firm age.     

From Which Source Do Small Firms Derive Their Innovative Inputs? Some Evidence from Italian Industry

This paper relies upon the hypothesis that the “knowledge production function” – defined in the geographical sense – is characterized by coefficient estimates which vary with firm size. In particular, large firms depend for their innovative output on direct and indirect R&D inputs, whereas small firms more extensively exploit the spillovers from research activities carried out by universities and by other firms. This hypothesis is tested against two different sets of data: the first based on patent statistics and dealing with 20 Italian regions over the period 1978–86; the second consisting of a selected number of product innovations identified by a literature-based counting procedure and dealing with 46 Italian provinces in year 1989. The results of regression analysis support the hypothesis that firms belonging to different size classes resort to different sources for the knowledge relevant to their innovative output. In particular, industry R&D prove to play a relatively more important function than do spillovers from university research in generating innovative output in large firms, whereas the opposite is true in the case of small firms.