Multinationals,R&D and Endogenous Productivity Asymmetries

We analyze the influence of endogenous productivity asymmetries between firms, in terms of competitiveness and size, on multinational activity. In the model, productivity depends on cost-reducing R&D (research and development). We show that when firms differ on commitment power in R&D, the R&D leader, independently of being a multinational or a domestic firm, tends to invest more in R&D than the R&D follower. Because of these productivity advantages, the R&D leader can more easily become multinational. Therefore, in addition to the proximity-concentration trade-off, we identify another FDI (foreign direct investment) determinant: technological competition.     

R&D and productivity growth: Evidence from the UK

Although the econometric evaluation of R&D has attracted wide interest in many countries, it has not attracted much in the UK. The main objective of this paper is to fill this void, i.e., to estimate the impact of R&D on productivity growth of the UK manufacturing sector. However, there are some additional objectives. Firstly, we estimate the impact of R&D on productivity growth of large and small firms and we discuss a number of theoretical arguments regarding the role of firm size. Secondly, given that the technological infrastructure influences the innovative capacity of a firm, we compare the impact of R&D on productivity growth of high-tech firms with the corresponding impact on productivity growth of low-tech firms. Thirdly, we investigate whether the contribution of R&D to productivity growth has changed over time.

Based on firm-level data (78 firms, 1989–2002), we find that the contribution of R&D is approximately 0.04. Although the R&D-elasticity of large firms (0.044) is higher than the corresponding elasticity of small firms (0.035), the difference is small. In contrast, the R&D-elasticity is considerably high for high-tech sectors (0.11), but statistically insignificant for low-tech sectors. Finally, the investigation of the elasticity of R&D over time revealed an interesting discontinuity showing that although until 1995 the R&D-elasticity was approximately zero, after 1995 it increased dramatically to 0.09. We investigate the potential causes of such non-linearity and we suggest a number of possible explanations.     

The impact of public R&D expenditure on business R&D*

This paper attempts to quantify the aggregate net effect of government funding on business R&D in 17 OECD Member countries over the past two decades. Grants, procurement, tax incentives and direct performance of research (in public laboratories or universities) are the major policy tools in the field. The major results of the study are the following: Direct government funding of R&D performed by firms has a positive effect on business financed R&D (except if the funding is targeted towards defence activities). Tax incentives have an immediate and positive effect on business-financed R&D; Direct funding as well as tax incentives are more effective when they are stable over time: firms do not invest in additional R&D if they are uncertain of the durability of the government support; Direct government funding and R&D tax incentives are substitutes: increased intensity of one reduces the effect of the other on business R&D; The stimulating effect of government funding varies with respect to its generosity: it increases up to a certain threshold (about 10% of business R&D) and then decreases beyond; Defence research performed in public laboratories and universities crowds out private R&D; Civilian public research is neutral for business R&D. * We thank the participants to various seminars, including the OECD Committee for Scientific and Technology Policy and the NBER 2000 Summer Institute on Productivity for helpful comments and suggestions. All opinions expressed in this article are those of the authors and do not reflect necessarily the views of the OECD or Université Libre de Bruxelles.     

Innovation and productivity in manufacturing and service firms in Catalonia: a regional approach

This article analyses the determinants of research and development (R&D) and the role of innovation on labour productivity in Catalan firms. Our empirical analysis found a considerable heterogeneity in firm performances between the manufacturing and service industries and between low- and high-tech industries. The frontiers that separate manufacturing and service industries are increasingly blurred. In Catalonia high-tech knowledge-intensive services (KIS) play a strategic role in promoting innovation in both manufacturing and service industries, and driving growth throughout the regional economy. Empirical results show new firms created during the period 2002–2004 that have a greater R&D intensity than incumbent firms (54.1% in high-tech manufacturing industries and 68.8% in high-tech KIS). Small and young firms in the high-tech KIS sector are very prone to carrying out R&D and they invest more in innovation projects. R&D expenditures, output innovation, investment in physical capital, market share and export have positive effects on labour productivity in both the manufacturing and service sectors. Firm size, on the other hand, has a positive effect on productivity in manufacturing industries but not in services.     

Evidence on the impact of R&D and ICT investments on innovation and productivity in Italian firms

Both research and development (R&D) and information and communication technology (ICT) investment have been identified as sources of relative innovation underperformance in Europe vis-à-vis the USA. In this article, we investigate the R&D and ICT investment at the firm level in an effort to assess their relative importance and to what extent they are complements or substitutes. We use data on a large unbalanced panel data sample of Italian manufacturing firms constructed from four consecutive waves of a survey of manufacturing firms, to estimate a version of the CDM model of R&D, innovation, and productivity [Crépon–Duguet–Mairesse 1998. Research, innovation and productivity: An econometric analysis at the firm level. Economics of Innovation and New Technology 7, no. 2: 115–58] that has been modified to include ICT investment and R&D as the two main inputs into innovation and productivity. We find that R&D and ICT are both strongly associated with innovation and productivity, with R&D being more important for innovation, and ICT investment being more important for productivity. For the median firm, rates of return to both investments are so high that they suggest considerably underinvestment in both these activities. We explore the possible complementarity between R&D and ICT in innovation and production, but find none, although we do find complementarity between R&D and worker skill in innovation.     

How do different motives for R&D cooperation affect firm performance? – An analysis based on Swiss micro data

The starting point of our analysis is the empirical fact that firms pursue different goals when getting engaged in R&D collaborations, often more than one goal at the same time. Given that firms are driven by different motives for R&D cooperation, the aim of this article is to investigate the differences related to different motives with respect to the impact of R&D cooperation on firm innovativeness and firm productivity. Not only R&D cooperation in general but also cooperation driven by each of the seven motives considered in this paper correlate positively with the sales share of innovative products. With respect to innovativeness, the characterization of cooperation by the driving motive did not add much more than could be gained through the overall variable ‘R&D cooperation yes/no’. Technology-motivated collaborative activities show a weaker tendency to positive direct effects on productivity than cost-motivated cooperation. In this case, the distinction of several cooperation motives yields some additional insights as compared to the overall cooperation variable. On the whole, distinguishing various cooperation motives appears to be fruitful because it allows more differentiated insights that would remain hidden behind the overall variable “R&D cooperation yes/no”.     

R&D,productivity, and exports: Plant-level evidence from Indonesia

This study examines the relation between productivity and exports in Indonesian manufacturing firms by taking account the endogenous choice of R&D. We first examine the determinants of R&D activity and find that exporting activity contributes positively to plants' R&D activity, while multinational corporate do not have a higher R&D propensity. The simultaneous estimates on the interrelation of R&D, productivity, and export show that R&D has a positive impact on both productivity and exports, suggesting the importance of R&D to Indonesian economic growth. It suggests also a two-way causality between productivity and exports, implying the coexistence of self-selection and learning-by-exporting effects in Indonesian manufacturing sector.     

What drives the choice of the type of partner in R&D cooperation? Evidence for Spanish manufactures and services

We analyse the heterogeneity in firms’ decisions to engage in R&D cooperation, taking into account the type of partner (competitors, suppliers or customers, and research institutions) and the sector to which the firm belongs (manufactures or services). We use information from the Technological Innovation Panel (PITEC) for Spanish firms and estimate multivariate probit models corrected for endogeneity which explicitly consider the interrelations between the different R&D cooperation strategies. We find that placing a higher importance to publicly available information (incoming spillovers), receiving public funding and firm size increase the probability of cooperation with all kind of partners but the role is much stronger in the case of cooperative agreements with research institutions and universities. Our results also suggest that R&D intensity and the importance attributed to the lack of qualified personnel as a factor hampering innovation are key factors influencing positively R&D cooperation activities in the service sector but not in manufactures.     

Composition of R&D expenditures and firm performance

ABSTRACT

The explosion of research and development (R&D) expenditures in China brings a puzzling fact that the proportion of research in R&D is extremely small, and thus the proportion of development is large. This article distinguishes research from development in R&D and investigates the heterogeneous effects of the two components on the performance of Chinese listed firms. Using a generalized propensity score matching approach with continuous treatments, we present non-linear relationships between R&D composition and firm performance. While development-oriented firms benefit more from an increase in profit than a growth in productivity, orientation toward research contributes more to productivity gains than to profitability. Research and development activities are found to be complementary in promoting firm performance. The results suggest the existence of optimal proportions of the components of R&D for maximizing firm performance.     

R&D cooperation with scientific institutions: a difference-in-difference approach

Economists and business managers have long been interested in the impact of research and development (R&D) cooperation with scientific institutions on the innovation performance of firms. Recent research identifies a positive correlation between these two variables. This paper aims to contribute to the identification of the relationship between R&D cooperation with scientific institutions and the product and process innovation performance of firms by using a difference-in-difference approach. In doing so, we distinguish between two different types of scientific institutions: universities and governmental research institutes. For the econometric analyses, we use data from the German Community Innovation Survey. In total, data from up to 560 German service and manufacturing firms are available for the difference-in-difference analyses. The results suggest that R&D cooperation with universities and governmental research institutes has a positive effect on both product innovation and process innovation performance of firms.     

A matching analysis of why some firms in peripheral regions undertake R&D whereas others do not

Many studies have established the importance of investment in R&D to facilitate innovation and consequently improve firm productivity. Firms decide whether or not to undertake R&D depending on a range of factors such as market orientation, business objectives, competitive advantages and absorptive capacity. This paper studies the factors that influence this decision in peripheral locations; and for firms that do not undertake R&D, we analyse the reasons for not doing so. The research is based on data from a survey of some 250 matched firms operating in Northern Ireland, about half undertaking R&D and half not. Northern Ireland is an interesting case study because it exhibits a low level of investment in R&D despite the public subsidies and policy initiatives that have existed over the last 30 years. For firms that undertake R&D, our results mostly confirm the findings of others while for firms that do not undertake R&D the results point to a capabilities-gap rather than a resource-gap as the fundamental problem. Policy conclusions are drawn as to what might be done to boost both the amount of R&D undertaken and the number of firms engaged in R&D in peripheral regions.     

E-commerce,R&D,and productivity: Firm-level evidence from Taiwan

This study investigates the impact of e-commerce and R&D on productivity, using a unique panel dataset obtained from Taiwanese manufacturing firms for the period from 1999 to 2002. We specifically consider the network externalities of e-commerce and employ the system generalized method of moment (GMM) technique to deal with the endogenous problem of e-commerce adoption. The empirical results show that both e-commerce and R&D capital have a positive influence on productivity, while R&D exhibits a larger productivity-enhancing effect. We also find a complementary relationship between e-commerce and R&D on enhancing productivity. Crucially, the inter-industry network externality of e-commerce significantly contributes to productivity.     

Technological districts localized spillovers and productivity growth. The Italian evidence on technological externalities in the core regions

Technological R&D externalities are the effects on the technological capacity of each firm stemming from the complementary and interrelated activities of R&D activities of other firms that operate both in the same industry and in other industries. R&D technological externalities are specially influential at the regional level. Regional proximity enhances the circulation of information, the opportunities for external learning; the scope for capitalizing on potential complementarities among the variety of firms and the different R&D activities being carried out by each firm, and the opportunity for technological networking. The empirical evidence on core regions in Italy in the 1980s confirms that regional clustering of complementary and interrelated R&D activities facilitated the emergence of technological districts. Firms located within technological districts benefited enormously from the R&D technological externalities spilling out from the complementary and interrelated R&D activities of other firms localized in the same area. Consequently, firms localized within technological districts had fast rates of introduction of technological innovations which, in turn, made it possible for total factor productivity levels to be raised with comparatively low levels of intra-muros R&D expenses.     

The influences of different R&D types on productivity growth in OECD countries

Productivity has become an important concern for the sustainable development and growth of a country. Countries, such as those in the Organization for Economic Cooperation Development (OECD), that actively innovate and conduct Research and Development (R&D) activities always have high productivity growth, with research to date examining the positive influences of R&D on productivity. R&D activities are classified into three types: basic research, applied research and experimental development. To test the different influences of the different R&D types, panel data from 23 OECD countries for the period 1996–2010 have been constructed and the Data Envelopment Analysis method is used to measure and decompose productivity growth. Moreover, based on Mansfield's [“Basic Research and Productivity Increase in Manufacturing.” The American Economic Review 70: 863–873] model, the influences of each R&D type on productivity growth are tested. The empirical tests show that R&D investments in experimental development and applied research have a positive effect on productivity growth in the immediate period; basic research influences productivity growth with a lengthier lag, even up to three periods.     

Exploring larger biotech research firm strategies: Projections from a comparison of small and larger firms

This is an exploratory study of larger biotech firms using insights from a head-to-head comparison of 49 small and 17 large U.S. biotech firms using archival data. We found small and large biotech firms to be significantly different from each other on R&D intensity and funding strategies. The findings are used to project and hypothesize about larger biotech firm growth strategies.Whereas R&D expenses in the small firms exceed total income by a wide margin, larger firms are able to cover most, if not all, of their R&D expenses. Thus, the larger firms are relatively more financially viable. Results also show that the larger firms derive a greater proportion of their revenues from collaborative research agreements (CRAs), which has key implications for revenue growth in these firms.Based on the findings we project R&D expenses and collaborative research revenues for biotech firms as they grow in size.     

Firm performance and corporate finance in New Zealand

Low productivity growth in New Zealand has been a paradox. We study New Zealand firms’ profitability, in terms of profit margin and return on assets (ROA), from the viewpoints of productivity enablers using firm-level panel data. We find that tangible fixed investment and a research and development (R&D) tax incentive are associated with higher profitability performance. In addition, the firm size is found to be a key determinant of profit margin. By contrast, we do not find any evidence that intangible investment can improve the profitability. The global financial crisis has not changed the leverage effect on ROA in New Zealand, while the impact of R&D became more prominent after the crisis.     

Productivity and R&D sources: evidence for Catalan firms

This paper draws on a sample of innovative Catalan firms to identify how two main sources of innovation – internal R&D and external R&D acquisition – affect productivity in the manufacturing and service industries. The sample comprises 1612 innovative firms from the fourth European Community Innovation Survey (CIS-4) during the period 2002–2004. We compare empirical results when applying the usual OLS and quantile regression techniques controlling with a non-parametric sample selection. Our results indicate the different patterns that are attributable to the two sources of innovation as we move up from lower to higher conditional quantiles. First, the marginal effect of internal R&D on productivity decreased as we moved up to higher productivity levels. Second, the marginal effect of external R&D acquisition increased as we moved up to higher productivity levels. Finally, empirical results show significant complementarities between internal and external R&D, which are higher for knowledge-intensive service sectors.     

Impact of patenting on firms' performance: an empirical investigation based on manufacturing firms in India

The study aims to estimate the impact of R&D expenditure and patenting on the performance of firms using productivity, profitability and Tobin's q ratio as the performance indicators. The study uses firm-level data of 489 high- and medium-technology firms during the period of 2000–2010. We employ relatively a new source of data particularly in the context of India, firm-level patent granted, that has not been explored earlier. The study finds that firms patenting result in productivity improvement of firms, whereas R&D expenditure does not. The study further finds the evidence of positive impact of patenting on financial performance of firm with significant differences between foreign and domestic firms.     

Driving forces for research and development strategies: an empirical analysis based on firm-level panel data

This paper investigates empirically different ways to organize research and development (R&D) within Swiss firms. Based on a longitudinal data set comprising three cross-sections (1999, 2002, and 2005) of the Swiss Innovation Survey, four different types of R&D strategies could have been separated; firms combine in-house R&D with R&D co-operations (coop) or in-house R&D with external R&D (buy), or they conduct in-house R&D, external R&D, and R&D co-operations (mixed), or they exclusively rely on in-house R&D (make). It is the aim of this paper to understand what drive firms to go for different strategies. Based on econometric estimations controlling for correlations between the dependent variables and endogeneity among the independent variables, it was found that concepts related to the absorptive capacity, incoming spillovers, and appropriability, the importance of different knowledge sources, the competitive environment, costs, and skill aspects as well as technological uncertainty are essential factors to determine a firm's decision to choose a specific way to organize R&D.     

Technological knowledge,spillover and productivity: evidence from Taiwanese firm level panel data

Using a panel data on Taiwanese manufacturing firms from 1990–1997, this study investigates the relationship among technological knowledge, spillover and productivity. In addition to R&D stock, we also employ patent counts to construct the output-side indicators of knowledge and spillover to explore the relationship between knowledge and productivity. We find a very significant contribution of R&D, patents and spillover stock to productivity. In addition, the magnitude of the patent stock coefficient is substantially larger than that estimated by R&D stock. Our results imply that innovative activity investment has been very productive in increasing output for Taiwanese manufacturing firms in the 1990s.