| 紫外线/臭氧处理对喷墨印刷铜图文和聚酰亚胺基材间相互作用的影响 |
| |
| 引用本文： | LEE Young-In,GOO Yong-Sung,LEE Kun-Jae,HWANG Yun-Gu,BYUN Younghun,PARK Hee Jung,PARK Deok-Yong,MYUNG Nosang V,CHOA Yong-Ho,何文.紫外线/臭氧处理对喷墨印刷铜图文和聚酰亚胺基材间相互作用的影响[J].中国印刷物资商情,2013(1):71-75. |
| |
| 作者姓名： | LEE Young-In GOO Yong-Sung LEE Kun-Jae HWANG Yun-Gu BYUN Younghun PARK Hee Jung PARK Deok-Yong MYUNG Nosang V CHOA Yong-Ho 何文 |
| |
| 作者单位： | [1]Department of Fine Chemical Engineering,Hanyang University, Ansan 426 -791, Republic of Korea [2]Advanced MaterialsLaboratory, Samsung Advanced Institute of Technology, Yongin 446-712, Republic of Korea [3]Materials Research Laboratory, AdvancedInstitute of Technology, Yongin 446 - 712, Republic of Korea [4]Department of Applied Materials Engineering, Hanbat National University, Daejeon 305 -719, Republic of Korea [5]Department of Chemical and Environmental Engineering and Center forNanoscale Science and Engineering, Univcrsity of California-Riverside, Riverside, CA 92521, USA [6]不详, Univcrsity of California-Riverside, Riverside, CA 92521, USA |
| |
| 摘 要： | 摘译近年来,喷墨印刷电子技术得到了迅速发展,因为相对于传统光刻技术需要通过真空处理、化学沉积和蚀刻来制作电路图案,喷墨印刷更简单、经济。目前,喷墨印刷已用于制作各种灵巧的电子器件,如薄膜晶体管、射频识别标签、印刷电路板等。
|
| 关 键 词： | 喷墨印刷 相互作用 聚酰亚胺 紫外线 印刷电路板 基材 图文 臭氧 |
Effect of UV/Ozone Treatment on Interactions between Ink-Jet Printed Cu Patterns and Polyimide Substrates |
| |
| Institution: | LEE Young-In,GOO Yong-Sung,LEE Kun-Jae,HWANG Yun-Gu,BYUN Younghun,PARK Hee Jung, PARK Deok-Yong,MYUNG Nosang V,CHOA Yong-Ho( 1 Department of Fine Chemical Engineering,Hanyang University,Ansan 426-791,Republic of Korea 2 Advanced MaterialsLaboratory,Samsung Advanced Institute of Technology,Yongin 446 -712,Republic of Korea 3 Materials Research Laboratory,Advancedlnstitute of Technology,Yongin 446 -712,Republic of Korea 4 Department of Applied Materials Engineering,Hanbat National University,Daejeon 305 -719,Republic of Korea 5 Department of Chemical and Environmental Engineering and Center forNanoscale Science and Engineering,University of California-Riverside,Riverside,CA 92521,USA) |
| |
| Abstract: | In this study,we apply UV/Ozone treatment to modify the surface properties of polyimide substrate and investigate the effects of UV/Ozone treatment on surface properties of polyimide and the morphologies of inkjet printed Cu patterns. Wettability of polyimide surface is enhanced by UV/Ozone treatment as confirmed by contact angle analysis and XPS results. The change in wettability affected droplet sizes and morphologies of ink -jet -printed lines.The average droplet size increased from 26.8μm on untreated polyimide to 42.5μm after UV/Ozone treatment.Furthermore,irregular patterns of coexisting beads and short lines were observed in untreated polyimide film,despite minimal overlap of dots.In contrast,patterns that were ink - jet printed on polyimide film that was modified by UV/Ozone for 1 h showed continuous lines with straight edges. |
| |
| Keywords: | UV/Ozone Ink-jet printing Wettability Polyimide film Surface modification |
| 本文献已被 维普 等数据库收录！ |
|
