| 淬硬钢材料高速切削过程的有限元仿真 |
| |
| 引用本文： | 李琳,等.淬硬钢材料高速切削过程的有限元仿真[J].价值工程,2014(10):28-29. |
| |
| 作者姓名： | 李琳 |
| |
| 作者单位： | 北京理工大学珠海学院,珠海519085 |
| |
| 基金项目： | 获国家重大专项资助项目（2009ZX04014-044）. |
| |
| 摘 要： | 基于对切削原理的深入研究,建立了金属切削过程的热力耦合有限元模型。基于DEFORM-3D软件平台,模拟了金属切削加工过程,得到了刀具和工件上的等效应变、温度场、刀具磨损的分布规律,仿真结果同实验对比分析误差在10%以内。
|
| 关 键 词： | 有限元法 切屑成形仿真 材料模型 仿真预测 |
FEM of High Speed Cutting on Hardened Steel |
| |
| LI Lin,CHEN Ze-feng.FEM of High Speed Cutting on Hardened Steel[J].Value Engineering,2014(10):28-29. |
| |
| Authors: | LI Lin CHEN Ze-feng |
| |
| Institution: | ( Beijing Institute of Technology, Zhuhai, Zhuhai 519085, China ) |
| |
| Abstract: | In this paper, the finite element models of metal cutting were first discussed systemically, based on metal cutting theroy. Based on the platform of finite element software DEFORM-3D, the processes of metal cutting were simulated and the laws of distribution disclosed for equivalent strain field, temperature field and tool wear were got. The error of the prediction is about 10%. The model has been validated by simulation results to be reliable. |
| |
| Keywords: | FEM chip formation simulation material model simulation prediction |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
