Effective technology and design teaching: getting it right in the classroom

Technology and design was added to the Northern Ireland curriculum in September 1992 and through it, teachers seek to address the need for pupils to understand the ever-changing man-made world by developing skills and understanding in its four elements of designing, communicating, manufacturing and the use of energy and control. To be effective in attaining these goals, it is important that teachers allow pupils to have a voice in their learning. They should do this by taking account of pupil responses to the tasks they issue and using those responses as a basis for making choices about instruction and support strategies. This is particularly important in technology and design as pupils need to interpret instructions in light of their design ideas. This paper outlines how three case studies of technology and design teaching were used to identify a range of teaching and learning strategies and evaluate them for their potential to create a learning dialogue with pupils. Drawing on aspects of the effective teaching debate, this learning dialogue was then applied to how teachers exploited pupil histories, managed a range of collaboration strategies and provided effective task orientation. The case studies were based on observations, interviews and content analysis of work over a complete design-and-make project in each school. The paper outlines three continua for effectiveness in each of the three areas observed. The first continuum shows that teachers need a more individualised view of building on pupil histories, the second outlines a range of strategies for the management of pupil collaboration in learning and the third suggests that pupils need to be orientated into complex tasks in ways that support a progressively increasing level of independence in their thinking.     

Learning in Design and Technology: The Impact of Social and Cultural Influences on Modelling

The paper introduces the highly problematic nature of modelling in design and technology education and examines the relationship between cognitive and concrete modelling. Its aim is to gain insight into what learners do, rather than what others say they ought to do in their learning activities. The variety of purposes that educators have for learners’ modelling are discussed through examining the contested curriculum justification for design and technology education itself. The paper proposes that learners’ modelling cannot be extracted from the social milieu in which they act and it provides some insights of these social influences through the analysis of two case studies. Their settings are a girls’ secondary school and a college of higher education. Each case study is presented independently but organised with a common format to consider a) the impact of assessment on learning intentions and outcomes; b) cultural influences on learning and modelling; c) social influences on learning and modelling. A discussion of the emergent themes considers implications for teachers. This revised version was published online in July 2006 with corrections to the Cover Date.     

Assessment for Learning: Using Solo Taxonomy to Measure Design Performance of Design & Technology Students

One objective of Design & Technology (D&T) is to enable students to be inventive in designing practical solutions to problems. D&T is viewed as being successful when students can demonstrate the ability to recognize problems, undertake inquiries by themselves, and contribute ideas accordingly. This article will discuss a study which investigated an alternative approach to assessing students’ design performances. In the study, a new item format was designed and a new criterion framework of assessment based on Biggs’ SOLO Taxonomy was developed. The evidence from this study indicates strong face validity for the new approach which maps closely to the goals and purposes of learning D&T. This revised version was published online in July 2006 with corrections to the Cover Date.     

Transferring and Transforming Technology Education: A Study of Norwegian Teachers’ Perceptions of Ideas from Design & Technology

What happens when educational ideas cross national and cultural borders? How do teachers respond to ideas originating in a different school system and a different national culture? This article reports on an empirical study investigating the transfer of ideas from Design &; Technology as a subject in England and Wales into Norwegian schools. A sample of teachers participating in a specific project on technology teaching inspired by this subject has been studied by means of interviews and classroom observation. Results of the study show that while some elements of Design &; Technology are adopted by the teachers, essential ideas of the subject are significantly transformed. Drawing on Barnes, (1992, Teachers and Teaching: From Classrooms to Reflection (pp. 9–32), The Falmer press, London) concept of teachers' professional frames for teaching, it is shown how specific aspects of the national and educational culture have had a considerable effect on?the teachers' interpretation of the nature of technology as a subject of teaching and its place in the curriculum. The study illustrates the importance of the cultural context in how educational ideas are interpreted, reshaped and realized in schools.     

The Determinants of Innovation: R & D,Technology Transfer and Networking Effects

The traditional analysis of innovation has focused on the Schumpeterian hypothesis of a positive link between market power and innovation. This often includes an implicitly linear view of the innovation process, with R & D as a necessary first step. This paper widens the determinants of innovation beyond R & D to include technology transfer and networking effects, thus extending the standard Schumpeterian analysis. When tested on a dataset of c. 1300 UK manufacturing plants, R & D, technology transfer and networking are found to be substitutes in the innovation process, with the two latter intensities especially important in increasing the extent of innovation. There is no evidence that (actual) monopoly power increases the extent of innovation, but there are significant plant and sectoral effects on innovation.     

Adding Value to the Teaching and Learning of Design and Technology

It has been argued that design and technology can be used as a vehicle for teaching science and vice versa. In this paper, we report an investigation into Grade 6 students understandings of concepts embodied in the Systems strand of a technology syllabus as they grappled with a unit of work in technology for the first time. The unit of work involved students in the design and construction of simple systems, followed by experiences with more complex systems. Qualitative research methods were used to investigate the activities of the students as they engaged in the design and technology learning experiences for eight weeks. Data sources included student and teacher interviews, video and audio recordings of whole class and small group interactions, students notes, drawings and diagrams, and researchers field notes and reflections. Changes in students ability to identify the individual components and analyse how the components worked together in systems, and evidence of students use of scientific understandings for explanations, were noted as the unit of work progressed. An improvement was observed in students abilities to describe relationships between inputs, processes and outputs, and outline sequences of cause and effect. The technology and science appeared to be complementary as they developed technology specific and action-oriented technology and science language, which may be evidence of the presence of a community of learners. Recommendations are proposed for enhancing the value of both design and technology and science if both subjects are taught together as part of an integrated program in primary schools.     

Developing the Teaching of Food Technology in Primary Schools in England through Curriculum Development and Initial Teacher Education

This paper investigates developments in the teaching of food technology introduced as an element of design & technology in the 1990 National Curriculum for Technology in the English primary curriculum for children aged five to eleven years. It reviews briefly the situation for food teaching before 1990 and identifies a number of relevant issues. This is followed by an overview of developments in food technology in primary schools between 1992 and 2001, highlighting the need for primary teachers and trainee teachers on initial teacher education courses to develop an understanding of how to teach food technology in their schools. The development of teaching materials through the Nuffield Approach to food technology in primary schools is outlined together with a case study of the use of the materials in initial teacher education at the University of Surrey Roehampton. The paper describes the uptake of Nuffield Primary food technology materials as measured by down loads from the Nuffield Primary Design & Technology web site. Alongside this, there are reflections of primary trainee teachers on the impact of using the Nuffield food technology materials on their classroom practice during school experience. It concludes with a discussion of the key issues arising from the paper and suggestions for future research. This revised version was published online in July 2006 with corrections to the Cover Date.     

Using ‘Electronic Portfolios’ to Challenge Current Orthodoxies in the Presentation of an Initial Teacher Training Design and Technology Activity

The paper examines the extent to which a University undergraduate curriculum initiative provided initial teacher trainees with opportunities to challenge orthodox design methodologies through the production of an electronic portfolio within and extended design and technology activity. It was found that the ‘electronic portfolio’ served primarily as a developmental tool for promoting creative continuity and sound, reflective, design practice within a structured educational design challenge. The portfolio also provided a focus for the development of ‘e’ learning skills as it facilitated the use of new technologies in the compilation of the portfolio. Additionally, the portfolio provided trainees with a means by which they were able to demonstrate their capability to prospective employers. The use of the ‘electronic portfolio’ challenges current orthodoxy and methods routinely employed to present and assess trainees’ creative work, which have been shown to constrain innovative practice. The paper concludes that the use of the ‘electronic’ portfolio was successful in facilitating trainees’ engagement with a creative Design and Technology process.     

Research in Purpose and Value for the Study of Technology in Secondary Schools: A Theory of Authentic Learning

This paper briefly examines the literature on (a) problem-based learning (PBL), including constructivism and problem solving, and (b) learning in context, including mediation, embodiment, distribution, and situatedness. We use this literature, our previous research [Hill & Smith Journal of Technology Education 9(1), 29–41 (1998)], and some initial findings from our present research as a basis for a theory that we call authentic learning. The Theory of Authentic Learning provides a theoretical framework on which to scaffold purpose and value for the study of technology in secondary school curriculum. Initial results from Year One of our present three-year study contribute to the refinement of our Theory of Authentic Learning. First, we present some relevant literature, then we illustrate the Theory of Authentic Learning, and finally we conclude with some preliminary findings from our present research.     

“课程思政”理念下金融学课程的教学设计及创新

将课程思政融入金融学专业的教学是实现立德树人教育教学目标的重要途径。利用金融学专业课程众多历史案例,通过案例教学将金融知识、金融技能、金融素养和思政元素充分结合。运用线上线下相结合的翻转课堂教学方式,践行以学生为主体的教育观,将社会主义核心价值观和中华民族传统文化融入金融专业知识,为中国金融安全和长远发展培养具有专业知识和金融职业道德的全能型金融人才。     

Gender and Technology in Hong Kong: A Study of Pupils' Attitudes Toward Technology

Attitudes play an important role in guiding and predicting future actions. In Hong Kong, where traditional attitudes regarding female and male roles often clash with more-modern influences, students' negative or positive attitudes toward technology have obvious implications for their participatory role in society. This paper reports on a study of Hong Kong Pupils' Attitudes Toward Technology. Items in a survey distributed to nearly 3,500 junior secondary school students were used to gauge their attitudes toward several areas of technology. Questions related to parents' careers and domestic influences were also asked.The analysis revealed that significant differences existed between girls and boys in many of the items. For instance, the importance of taking technical subjects such as Design & Technology (D&T) was found to be significant in their attitudes about technology being an activity for both genders. Similarly, students' interest in technology, attitudes about technology in the school curriculum, and ideas about careers related to technology showed significant differences between girls and boys. Given the results of the study, changes in Hong Kong's secondary school D&T are proposed. Current strategies being developed in Hong Kong's D&T teacher preparation programs are also outlined.     

Pragmatism, Pedagogy and Philosophy A Model of Thought and Action in Action in Primary Technology and Science Teacher Education

This article reports on one outcome from a three-year study with pre-service primary teachers at Goldsmiths' College, University of London. The purpose of the study was to evaluate the influence of participants' prior educational experience and beliefs about the relationship between design & technology (D&T) and science on their lesson planning for these subjects during school placements. Data from the study support a three-domain model of pre-service teachers' thinking and action. When operating within the pragmatic domain, participants are primarily concerned with survival in the classroom, resulting in short-term planning which may contradict their epistemological and curricular beliefs. In the pedagogical domain, the focus shifts from the pre-service teacher themselves and their immediate survival to the learning potential of the activities they plan. There is evidence that some participants have progressed to operating within a philosophical domain, leading to clasroom practice which reflects and re-conceptualises pre-service teachers' core beliefs about the nature of, and relationship between, D&T and science. This revised version was published online in July 2006 with corrections to the Cover Date.     

Competition in Research and Development: A Theory for Contradictory Predictions

This paper develops reasons for the many seemingly contradictory findings in the literature about competition and research and development (R&D) investment. The theory of R&D competition implies that increases in competitive pressure may increase R&D investment, decrease it, increase it initially but decrease it over greater levels of competitive pressure (an inverted-U relation), decrease it initially but increase it over greater levels (a U relation), or have no effect at all.      

关于织物结构设计课程教学改革的探讨

本文通过对织物结构设计课程教学状况的分析,从教学的模式和内容两个方面提出了促进教学效果的方法,一是运用多媒体课件代替传统教学模式,二是实现理论教学和实践教学无缝对接.     

低碳经济背景下基层党政领导干部选任长效机制研究

发展低碳经济需要党政领导干部树立低碳理念,尤其需要基层党政领导干部树立科学的发展观、全面的统筹观、正确的绩效观。因此,如何把低碳理念科学地贯彻落实到基层党政领导干部选拔任用工作中去,构建长效激励机制已成为解决问题的关键。文章指出了低碳经济对基层党政领导干部提出的新要求,分析了基层党政领导干部选拔任用激励机制存在的主要问题及其原因,提出了完善长效激励机制的对策。     

The Influences of Socio-cultural Interaction upon Children's Thinking and Actions in Prescribed and Open-Ended Problem Solving Situations (An Investigation Involving Design and Technology Lessons in English and Finnish Primary Schools)

The purpose of this study was to explore the value and impact of social interaction upon children's design and technological thinking and actions. The study was based on the assumption that constructivistic driven and open-ended, creative design learning contexts enabled children to form, as well as to reconstruct, their designing and making capabilities and knowledge. Children were required, by means of open and closed teaching methods, to technologically create a particular product which used sound for a chosen purpose.The resultant multiple data collection processes, using videos of children working, examination of children's completed projects and semi-structured interview techniques, enabled the authors to analyse childrens' acquisition of Design and Technology (D&T) knowledge.Pupil's capabilities were seen to be enhanced through their direct, active, socio-cultural interactions, within a range of classroom settings, and involving different teaching methods, with respect to the primary curricula in UK and Finland.     

“织物结构与设计”课程的教学改革探讨

从"织物结构与设计"课程的性质、作用、教学模式、教学方法、教学内容的针对性与适用性、课程考核内容与方法、教学效果等几个方面对课程的教学改革进行了探讨,以促进教学质量和人才培养质量的提高。     

Creativity in Design Engineering and the Role of Knowledge: Modelling the Expert

The present study focuses on the relationship between the acquisition of design knowledge by novice design students and the quality of their designs. Design learning is typically based on action and reflection. Knowledge of solution processes, being part of this reflection, is found to be crucial in monitoring and controlling the design process and in reaching an optimal, creative result. The studies described in this article suggest a close relationship between the amount of process knowledge – knowledge of managing and monitoring the solution finding process – reported by novice designers, and the creativity of the designed product.     

Building Structure Design as an Integral Part of Architecture: A Teaching Model for Students of Architecture

This paper explores the place of structural design within undergraduate architectural education. The role and format of lecture-based structure courses within an education system, organized around the architectural design studio is discussed with its most prominent problems and proposed solutions. The fundamental concept of the current teaching model in the Middle East Technical University (Ankara, Turkey) is quite appropriate for the education of future architects. If we consider that the main occupation of an architect is to design, then, naturally, the design studio should be at the center of the curriculum. Since the act of designing cannot be realized without artistic skills and scientific and theoretical knowledge it is also suitable that the activities in design studios are backed up with relevant lecture courses. On the other hand, the importance of effective structural design knowledge for an architect is emphasized within the context of a country that encountered major earthquakes in the past.