Investigations on the distribution of air transport traffic and CO2 emissions within the European Union

This study analyses the structure of air traffic and its distribution among the different countries in the European Union, as well as traffic with an origin or destination in non-EU countries. Data sources are Eurostat statistics and actual flight information from EUROCONTROL. Relevant variables such as the number of flights, passengers or cargo tonnes and production indicators (RPKs) are used together with fuel consumption and CO₂ emissions data. The segmentation of air traffic in terms of distance permits an assessment of air transport competition with surface transport modes.The results show a clear concentration of traffic in the five larger countries (France, Germany, Italy, Spain and UK), in terms of RPKs. In terms of distance the segment between 500 and 1000 km in the EU, has more flights, passengers, RTKs and CO₂ emissions than larger distances. On the environmental side, the distribution of CO₂ emissions within the EU Member States is presented, together with fuel efficiency parameters. In general, a direct relationship between RPKs and CO₂ emissions is observed for all countries and all distance bands. Consideration is given to the uptake of alternative fuels. Segmenting CO₂ emissions per distance band and aircraft type reveals which flights contribute the most the overall EU CO₂ emissions. Finally, projections for future CO₂ emissions are estimated, according to three different air traffic growth and biofuel introduction scenarios.     

An analysis of the greenhouse gas emissions profile of airlines flying the Australian international market

International commercial flights (with the exception of flights between countries in European Union including Iceland, Norway and Liechtenstein) are currently not subject to greenhouse gas emission reduction regulation. To formulate effective and efficiency policy to manage greenhouse gas emissions from air transport, policy makers need to determine the emissions profiles of all airlines currently flying into their country or region. In this paper, we use 2012 data on airlines' aircraft characteristics, passenger load and cargo load (obtained from statistics reported by Australian Government Bureau of Infrastructure, Transport and Regional Economics) to estimate the volume and carbon efficiency on each international route flying to and from Australia. This is the first study to use actual passenger and cargo load data to determine the greenhouse gas (specifically CO₂) efficiency of airlines operating in the Australian international aviation market. Airlines' CO₂ emission profile is dependent on many factors including but not limited to the aircraft used, payload, route taken, weather conditions. Our results reveal that the airlines’ CO₂ emission profile is not only dependent on the aircraft used and the number of passengers but also the amount of cargo on each flight.     

Analysis of CO2 emissions for island ferry services

In this study CO₂ emissions are calculated for ferries operating on both short and long range sea routes between mainland Scotland and the Orkney Isles. CO₂ emissions for land transport options connecting with the respective ferry services are also analysed. In particular the study offers a comparison of transport CO₂ emissions for long-range ferry services between Aberdeen and the Orkney Islands and short-range ferry services across the Pentland Firth. The latter involve a longer road journey for vehicles than the former. The results indicate significantly greater CO₂ emissions for long-range ferry services, despite shorter road connections. Existing public policy in this regard specifies and subsidises higher CO₂ emission ferry services operating on longer sea routes, to the disadvantage of non-subsidised short crossing services, the latter offering much lower CO₂ emission impacts (inclusive of connecting land transport CO₂ emissions). This suggests that policymakers need to focus on assessing CO₂ emission impacts when considering future tenders for subsidised ferry services. Findings also suggest that, for modest sized ferries serving islands, the optimal solution may be to use/specify the shortest possible sea routes in order to reduce CO₂ emissions from transport.     

Uncovering the spatiotemporal patterns of CO2 emissions by taxis based on Individuals' daily travel

Traffic-related carbon dioxide (CO₂) emissions have become a major problem in cities. Especially, the CO₂ emissions induced by taxis account for a high proportion in total CO₂ emissions. The availability of taxi trajectory data presents new opportunities for addressing CO₂ emissions induced by taxis. Few previous studies have analyzed the impact of human trips on CO₂ emissions. This paper investigates trip-related CO₂ emission patterns based on individuals' travel behavior using taxi trajectory data. First, we propose a trip purpose inference method that takes into account the spatiotemporal attractiveness of POIs to divide human trips into different types. Further, we reveal the spatiotemporal patterns of CO₂ emissions from various types of trips, including temporal regularity and periodicity as well as spatial distribution of “black areas”. Finally, comparative analysis of CO₂ emissions for different kinds of trips based on trip behavior is conducted using three variables, namely trip distance, trip duration and trip speed. This study is helpful for us to understand how to make travel and cities more sustainable through modifying people's trip behaviors or taxi trips.     

CO2 emissions associated with hubbing activities in air transport: an international comparison

Hubbing is an important operational practice in air transport. Many studies have been conducted to examine the benefits and impacts of hubbing from an economic perspective. However, its impact on CO₂ emissions, especially across different air spaces, is not well understood. This paper explores the impact of hubbing activities in air transport from an environmental perspective. With a detailed methodology and data from the Greek and Hong Kong/Sanya flight information regions (FIRs), three levels of CO₂ emissions are estimated: airport-based, airspace-based and flight-based. After contrasting the CO₂ emission efficiencies of Athens International Airport (AIA) and the Hong Kong International Airport (HKIA), aircraft type and flight distance are examined to explain their emission efficiency differences. It is found that HKIA is associated with poorer CO₂ emission efficiency at the airport and airspace levels because of the larger aircraft and longer flight distance. However, when CO₂ emission efficiency at the flight level is considered, HKIA, with a higher passenger load factor, performs better. Major international hub airports should implement additional environmental measures to minimize the impact of hubbing activities on CO₂ emissions at the airport and airspace levels.     

The emission reduction potentials of First Generation Electric Aircraft (FGEA) in Finland

Under the looming climate crisis, aviation needs to find new solutions to cut its greenhouse gas emissions. One pathway towards zero emissions is the use of electric aircraft. While current battery technology will not allow for medium and long-haul flights at full capacity, on short-haul routes First Generation Electric Aircraft (FGEA) could play a significant role in the near future. Current FGEA under development could carry 9–19 passengers on distances of 400–1046 km by 2025. This study focuses on the emissions reduction potentials of FGEA in Finland. It compares the carbon dioxide equivalent (CO₂-eq) emissions and real travel times (RTT) from door-to-door of FGEA on 47 routes with existing aircraft, train and car transport modes, as well as with proposed high-speed rail (HSR) and electric vehicle implementation. The study found that replacing all existing aircraft with FGEA can clearly be recommended as it would result in a reduction of CO₂-eq emissions and RTT. Existing cars should only be replaced by FGEA on routes beyond 170 km. The replacement of existing trains by FGEA under the current energy mix is not recommended. However, once electricity could be provided from renewable energy sources exclusively, it would become feasible to replace existing trains on distances beyond 170 km and HSR beyond 400 km with FGEA.     

Examining the carbon emission impact of livelihood transitions in pro-poor tourism

This study examines carbon dioxide (CO₂) emission changes from livelihood transitions during tourism development to assess the environmental impact of pro-poor tourism (PPT) in China. The results indicate that livelihood transitions during PPT increased household income but also produced more CO₂ emissions. CO₂ emissions vary depending on factors including livelihood types after transition, income and household sizes, etc. The CO₂ per unit of income from tourism-based livelihoods is higher than from non-tourism-based livelihoods. Different livelihood strategies post transition also affect emissions. Practical suggestions that may mitigate emissions while not compromising residents’ income levels are provided.     

A carbon footprint analysis of renewable energy technology adoption in the modal substitution of high-speed rail for short-haul air travel in Australia

This study presents a carbon footprint analysis of renewable energy technology adoption in the modal substitution of high-speed rail for short-haul air travel in Australia. The carbon footprint analysis of renewable energy technology adoption in such modal substitution establishes the efficacy of various renewable energy technologies in assisting CO₂ emissions reduction on the Sydney–Melbourne city pair. Renewable energy technology efficacy, captured in the presented low-carbon pathways for high-speed transportation, provides an indication as to the CO₂ emissions reduction potential of the technologies under consideration and their impact upon the environmental performance of the air and high-speed rail modes. These low-carbon pathways displayed a reduction in annual CO₂ emissions throughout the longitudinal period ranging from moderate to significant. Furthermore, this study examines the cumulative effects of the considered renewable energy technologies upon the annual CO₂ emissions production of the high-speed transportation system. A reduction of 56%–69% in annual life cycle CO₂ emissions demonstrated the powerful mitigation potential of a combined air and high-speed rail transportation system in conjunction with renewable energy technologies adoption and a modal shift of 60%. Given this significant mitigation potential, the hybridization of the air and high-speed rail transportation systems with associated renewable energy technologies is considered. The effect of such hybridization would result in the formation of an integrated low-carbon, high-speed transportation system underpinned by the concept of “sustainable mobility” at the national level.     

Using GIS tools to estimate CO2 emissions related to the accessibility of large retail stores in the Oulu region, Finland

Everyday traffic accounts for a significant share of overall greenhouse gas emissions, in particular carbon dioxide (CO₂). While several solutions have been proposed for decreasing the emissions, a new kind of land use planning is required in order to achieve long-term effects. This study focuses on the effect of large retail store locations in the urban structure on overall CO₂ emissions, by using the Oulu region, Finland, as a case study. The aim was to utilize GIS tools to assess store locations in terms of CO₂ emissions from private cars used for consumer traffic. In this case, not only are the locations of the existing and planned retail units investigated with respect to population distribution and car ownership, but the analysis is also carried out by regarding any location within the study area as a hypothetical site for a large retail unit. According to the applied method, CO₂ values are lowest near the centre of the studied region, the region with the highest population density, although the city centre itself did not turn out to be the most optimal location for a retail store in terms of CO₂ emissions. Nevertheless, by generally reducing trip length, a compact urban structure is an important way of achieving long-term cuts in CO₂ emissions.     

Life-cycle CO2 emissions and influential factors for asphalt highway construction and maintenance activities in China

This study tried to clarify the magnitude of CO₂ emissions from highway construction and maintenance in China through life cycle assessment (LCA) method. For this, 227 real highway projects constructed from the year 2000 to 2011 in Zhejiang Province, China are classified into six types by two categories of N road (62 projects without grand bridge, great bridge and tunnel) and Y road (165 projects with the same road structures) and three sub-categories of (i) newly constructed road, (ii) replacing pavement road and (iii) full rehabilitated road. Significant influential factors of LCA results were revealed through multivariate linear regression models, combined with data quality assessment and sensitivity analysis. Numerical interval of assessment results indicate that the construction emissions of N highway project are more centralized to no more than 2900 t/lane-km, while Y project have a normal upper boundary of construction CO₂ emissions, about 5000 t/lane-km. The contribution of maintenance to CO₂ emissions probably could exceed that of newly construction both for Y project and N project. In addition, the pavement replacing and rehabilitation could bring about large amount of CO₂ emissions which even match with the CO₂ emissions from cumulative traffic volume during highway's life cycle. There are common factors for six categories. Cement and steel are the top largest CO₂ emissions contributors and sensitive factors for N road and Y road. The LCA results are not sensitive to the local construction materials but sensitive to the emission factor of diesel used in transportation and on-site construction.     

Profiling road transport activity: Emissions from 2000 to 2005 in Ireland using national car test data

This work describes a methodology for determining the average vehicle kilometres travelled by the private national car fleet in Ireland and estimating the disaggregated CO₂ and NO_x emissions from private vehicles in the Irish road transport sector for the period 2000–2005 using national car test records. The developed methodology facilitates the calculation of greatly improved estimates for vehicle kilometres under a range of constraint variables and thereby enables the disaggregated analysis of specific vehicle fleet groups and their associated activity patterns to support evidence-based policy development. The results indicate that while older vehicles are contributing significantly to car NO_x emissions; newer cars produce a higher share of CO₂ emissions than older cars in the vehicle fleet.     

UK supply chain carbon mitigation strategies using alternative ports and multimodal freight transport operations

In the last few decades, the building evidence that CO₂e emissions lead to climate change has pointed to a need to reduce CO₂e emissions. This research uses five scenarios in the context of UK import trade to assess total CO₂e emissions and costs of import re-routing containers. The overall objective is to assess possible carbon mitigation strategies for UK supply chains by using a combination of alternative ports and revised multimodal strategies. The model adopted includes three elements: port expansion, container handling and freight transport. The alternative scenarios explore different settings modal shift and short sea shipping.     

Responsive relationship between energy-related carbon dioxide emissions from the transportation sector and economic growth in Beijing—Based on decoupling theory

Decoupling theory is effective to analyze the interdependence between variables and has been applied in environmental economics. However, most of the previous literature focus on “decoupling” and “recoupling” analysis, while rarely consider their driving factors. This study aims to explore the relationship between transportation CO₂ emissions and economic growth in Beijing from 1995 to 2014 by an extended Tapio elastic analysis, considering the contribution from industrial emission reduction, industrial energy saving, industrial operating efficiency, and industrial development. The entire decoupling state between transportation CO₂ emissions and economic growth changed with time. From 1995 to 2005, the decoupling relationship between transportation CO₂ emissions and economic growth exhibits a fluctuation among expansive negative decoupling, weak decoupling, and expansive coupling. Since decoupling elasticity values among industrial energy saving, industrial operating efficiency and industrial development were variably large and neutralized with each other, interaction of these decoupling elasticities may explain the fluctuation of the entire decoupling effect during this period. During the period from 2006 to 2008, the negative impact of industrial energy-saving elasticity overtook the positive one from industrial operating efficiency elasticity, which leads to worsening in the decoupling state between transportation CO₂ emissions and economic growth. The decoupling state was improved from expansive negative decoupling to weak decoupling after 2008, which can be attributed to policy-oriented practices supporting energy conservation.     

Measuring the potential implications of introducing a cap and share scheme in Ireland to reduce green house gas emissions

This paper examines some of the potential impacts of introducing a cap and share scheme in Ireland. Under such a scheme a cap or limit is placed on national CO₂ emissions and individuals are allocated an annual CO₂ allowance. The research presented in this paper focuses on travel-to-work trips specifically. CO₂ emissions for these annual work trips are calculated and a cap is determined based on these results. Cap levels are set based on average emissions and a 20% reduction in average emissions as per Ireland's reduction targets. A national and Dublin only cap are examined and the results are presented as a means of comparison. Binary logistic models are used to determine the socio-economic characteristics of individuals who fall above and below the cap. The results demonstrate the importance of car ownership, journey distance, mode choice and household composition in determining whether a commuter is above or below the cap. Many commuters who fall above the cap are likely drive to work over long distances, have dependent children in their household and own more than one car.     

Carbon dioxide emissions and inland container transport in Taiwan

The aim of this study is to estimate the carbon dioxide (CO₂) emissions from inland container transport during the time period of 1998-2008 and predicts the trend of these emissions. The analyses show that the CO₂ emission from inland container transport in 1992 reached 1.03 million tonnes, and the figure drastically increased by 89.3% to 1.95 million tonnes in 2008. Using a multiple regression model, gross domestic product (GDP) and oil price are found to be the key drivers for CO₂ emission. The CO₂ mitigation strategies are discussed in the policy suggestions given that Taiwan is warming at twice global average rate.     

Transitions to low carbon transport futures: strategic conversations from London and Delhi

Climate change is a global problem and across the world there are major difficulties being experienced in reducing carbon dioxide (CO₂) emissions. The transport sector in particular is finding it difficult to reduce CO₂ emissions. This paper reports on two studies carried out by the authors in London (UK) and Delhi (India). It considers the common objectives for transport CO₂ reduction, but the very different contexts and baselines, potentials for change, and some possible synergies.Different packages of measures are selected and scenarios developed for each context which are consistent with contraction and convergence objectives. CO₂ reduction potentials are modelled and quantified by package and scenario. London is considering deep reductions on current transport CO₂ emission levels; Delhi is seeking to break the huge projected rise in transport CO₂ emissions.The scale of policy intervention required to achieve these goals is huge and there is certainly little public discussion of the magnitude of the changes required. The paper argues for a ‘strategic conversation’ at the city level, using scenario analysis, to discuss the priorities for intervention in delivering low carbon transport futures. A greater focus is required in developing participatory approaches to decision making, alongside network investments, urban planning, low emission vehicles and wider initiatives. Aspirations towards equitable target emissions may assist in setting sufficiently demanding targets. Only then is a wider awareness and ownership of potential carbon efficient transport futures likely to take place.     

Dynamic linkages between tourism transportation expenditures,carbon dioxide emission,energy consumption and growth factors: evidence from the transition economies

Tourism transport profoundly affects economic growth, energy consumption and carbon dioxide emissions. This study is an attempt to examine the impact of international tourism transportation expenditures, energy demand, foreign direct investment inflows, trade openness and urban population on carbon dioxide emission and per capita income for the panel of 11 transition Economies, over the period of 1995–2013. The results show that per capita income escalates the carbon dioxide emission (CO₂), which deteriorates the natural environment. International tourism receipts and international tourism expenditures for travel items are associated with the intensifying CO₂ emission and per capita income in the region. The study confirmed the energy-led emissions, FDI-led emissions, FDI-led growth, income-led emissions, income-led energy demand, trade-led growth and trade-led energy demand. The causality results further substantiate the the tourism-led growth and FDI hypothesis in the region. Finally, the variance decomposition analysis confirmed the following results, that is, (i) per capita income is the contributor that least influences CO₂ emissions, (ii) urban population influences per capita income and (iii) international tourism transportation expenditures will influence CO₂ emissions and per capita income for the next 10-year period.     

Urban bus fleet-to-route assignment for pollutant emissions minimization

This study proposes a methodology to optimize the assignment of an urban bus fleet to a set of fixed routes, taking into account the differences among routes and the differences among vehicle types and propulsion technologies in order to reduce pollutant emissions (CO₂, CO, THC, NO_x and PM). A Mixed Integer Linear Programming optimization model is stated and two scenarios are assessed: minimization of CO₂ and NO_x. The results show that it is feasible to obtain a fleet distribution in which emissions for any given pollutant are reduced without increase in emissions of other pollutants.     

Emissions,performance, and design of UK passenger vehicles

Consumer, legal, and technological factors influence the design, performance, and emissions of light-duty vehicles (LDVs). This work examines how design choices made by manufacturers for the UK market result in emissions and performance of vehicles throughout the past decade (2001–2011). LDV fuel consumption, CO₂ emissions, and performance are compared across different combinations of air and fuel delivery system using vehicle performance metrics of power density and time to accelerate from rest to 100 km/h (62 mph, t_z-62). Increased adoption of direct injection and turbocharging technologies helped reduce spark ignition (SI, gasoline vehicles) and compression ignition (CI, diesel vehicles) fuel consumption by 22% and 19%, respectively, over the decade. These improvements were largely achieved by increasing compression ratios in SI vehicles (3.6%), turbocharging CI vehicles, and engine downsizing by 5.7–6.5% across all technologies. Simultaneously, vehicle performance improved, through increased engine power density resulting in greater acceleration. Across the decade, t_z-62 fell 9.4% and engine power density increased 17% for SI vehicles. For CI vehicles, t_z-62 fell 18% while engine power density rose 28%. Greater fuel consumption reductions could have been achieved if vehicle acceleration was maintained at 2001 levels, applying drive train improvements to improved fuel economy and reduced CO₂ emissions. Fuel consumption and CO₂ emissions declined at faster rates once the European emissions standards were introduced with SI CO₂ emissions improving by 3.4 g/km/year for 2001–2007 to 7.8 g/km/year thereafter. Similarly, CI LDVs declined by 2.0 g/km/year for 2001–2007 and 6.1 g/km/year after.     

Design and planning for green global supply chains under periodic review replenishment policies

We quantify the impact of jointly optimizing strategic network design and tactical inventory planning on the cost and CO₂ emissions of multi-echelon logistics networks. The obtained insights indicate that longer optimized replenishment cycles reduce a node’s transportation cost and CO₂ emissions but increase its inventory costs. Moreover, under a fixed replenishment cycle, a node’s service level increases when supplied by a satellite warehouse. Finally: (i) the costs of implementing optimal green network design decisions could be misleading if inventory planning is neglected, (ii) greening of supply chains could become expensive, (iii) current legislative CO₂ ton prices hardly influence logistics networks.