The dry port concept: connecting container seaports with the hinterland

The dry port concept is based on a seaport directly connected by rail with inland intermodal terminals where containers can be dealt with in the same way as if they were in a seaport. The main purpose of the article is to extend the theory behind the dry port concept and to define three dry port categories; distant, midrange and close. The findings show that the dry port concept can help identify ways of shifting freight volumes from road to more energy efficient traffic modes that are less harmful to the environment, relieve seaport cities from some congestion and facilitate improved logistics solutions for shippers in the port’s hinterland.     

A freight transport optimization model for integrated network,service, and policy design

This paper presents a freight transport optimization model that simultaneously incorporates multimodal infrastructure, hub-based service network structures, and the various design objectives of multiple actors. The model has been calibrated and validated using real-life data from the case study of hinterland container transport of the Netherlands, where CO₂ pricing, terminal network configuration, and hub-service networks are chosen as the design measures. Policy packages combining multiple types of policies show better network performance as compared with the optimal performance resulting from a single policy type. This illustrates the value of incorporating multiple types of policies simultaneously in freight transport optimization.     

The value of specific cargo information for substitutable modes of inland transport

Communication about containers onboard a cargo carrier approaching a harbor with a hinterland operator who is to receive the containers usually reveals the total amount of goods (aggregate number of containers) to be transported inland upon unloading at the arrival dock. This communication is useful for the hinterland operator to plan and deploy its transport capacities. However, further transport of containers on the hinterland involve various transport modes at differing costs. For example, the delivery time requirement of a container dictates the most appropriate mode of inland transport, be it truck, rail, or barge, in decreasing order of speed, flexibility and cost, to move the container to the next destination. In general there may be several types of delivery time requirements and containers of each type is most economically moved inland in a corresponding transport mode. Trucking is usually used for containers that need urgent delivery and train or barge for not so urgent types. In order to efficiently plan the transport capacities for after-arrival conveyance of containers having multi-type delivery time requirements, not only should the aggregate number of containers, but also the number of containers of each type, be made available to the hinterland operator. We consider several information scenarios and in each scenario we solve a single-period capacity planning serving multi-type demands with product substitution. We then compare expected transport costs between information scenarios to evaluate the benefit of specific cargo information in improving the next-step transporting after containers are unloaded at the port of entry.     

Patterns of maritime supply chains: slot capacity analysis

This paper offers a tool for analysing patterns of maritime supply chains. The study uses empirical data on slot capacity deployed by container shipping lines for analysing ports (as nodes) and routes and shipping lines (as links) that are embedded within the maritime supply chain. The ports of Singapore and Hong Kong are chosen to illustrate the respective transhipment and gateway perspectives. Findings reveal that geographical location and changes in the constitution of players can have reverberations on the maritime supply chain dynamics that traverse the port. Furthermore, evidence from trade route data also shows that maritime supply chain dynamics associated with transhipment and gateway ports could be governed by different levels of scope economies, demand complementarity and market power. The paper illustrates the abundant potential of slot capacity analysis for academic and industry/market research. Thus, future research can be pursued in various contexts and for different applications.     

Opportunities to improve container barge handling in the port of Rotterdam from a transport network perspective

This paper presents and evaluates an opportunity to improve the competitiveness of container barge transport in the hinterland of Rotterdam through a reorganization of container barge services. This reorganization improves the handling of barges in the port and consists of splitting existing services into a trunk line operation in the hinterland and collection/distribution operations in the seaport. A marginal cost model is used to demonstrate the potential net benefits of these revised services. The main conclusion is that these split services can improve the competitiveness of barge hinterland transport, but the effectiveness depends on several conditions. These conditions are first of all related to the design and organization of collection and distribution transport, but also to the characteristics of the trunk line operation in the hinterland.     

Assessing policy measures for the stimulation of intermodal transport: a GIS-based policy analysis

Intermodal transport is the combination and integration of several transport modes (such as rail, inland waterways with road transport). In order to make the transhipment easy and efficient standard loading units are used, such as containers or swap-bodies. As for the main haul, more environmental friendly modes are used (rail and inland waterways) and a modal shift towards these modes can help in reducing the congestion. Therefore several policies are directed to stimulate the intermodal transport market.In this paper, a location analysis model for Belgian intermodal terminals (LAMBIT) is developed and used to assess different policy measures in Belgium. The simulations show that the different policy measures oriented towards the rail/road and inland waterways/road combinations should be incorporated in a coherent, integrated vision, in order to not create a modal shift between the different intermodal transport options. The methodology can easily be extended towards a European scale.     

Container freight rates and the role of surcharges

This paper demonstrates that the structure of ocean container freight rates has become more complex. A growing number of surcharges are being imposed by the carriers on their customers, surcharges that are not only adding significant extra costs but are highly variable over time. These elements are examined based on a data set of export rates from ports on the Northern European Range that have been compiled from a major global carrier. The paper compares the surcharges to the base rates and discusses some of the implications for shippers who face increasing uncertainty in planning supply chains. Some of the issues for academic research on freight rates is also examined and points to the need to clearly identify what is included in the freight rate data employed. In addition, questions are raised concerning the suitability of many of the variables traditionally used to explain or predict freight rates.     

Levels of internationalization in the container shipping industry: an assessment of the port networks of the large container shipping companies

This paper examines the internationalization level of the world’s largest container shipping companies by examining their port networks. The results of our analysis show that only three of the nineteen companies could be considered as being truly ‘International’ and service the ‘lion’s share’ of the major and minor ports distributed across the globe. The port networks of the other companies in our survey, whilst having individualized features, shared common characteristics. Guided by the ‘Uppsala Model of Incremental Internationalization’ (Johanson and Vahlne, 1977), we were able to identify four internationalization levels of a container shipping company that are indicated by their port network.We argue that the port network plays an additional role as it contributes to the internationalization level of the container shipping companies. This is important because the internationalization level affects the container shipping company’s ability to expand its customer base both at a local and international level. Local customers would have access to a larger international destination network and international customers would be able access a larger local distribution network without transhipping between different companies.Amongst other issues, we were able to determine that, for the analyzed container shipping companies, ‘Internationalization’ of a port network means including or excluding ports in specific regions or sub-regions in their own network, and that a company’s home base or history plays a significant role in this development.     

Integration of inland waterway transport in the intermodal supply chain: a taxonomy of research challenges

This paper identifies research opportunities which will enable the further integration of inland waterway transport in the intermodal supply chain. Intermodal transport may be interpreted as a chain of actors who supply a transport service. Inland navigation can play a crucial role in increasing supply chain service performance. A first group of research challenges lies in the evolving relationship between transport geography and logistics activities. The next set of research challenges has the objective to encourage efficient operations in IWT: development of a system wide model for IWT, integration of operational planning systems and analysis of bundling networks. A third group of research efforts is directed towards shippers and consignees who use the intermodal transport chain to send or receive their goods: further development of models that integrate intermodal transport decisions with supply chain decisions and creation of green supply chains. A fourth cluster of research challenges concerns the problem domain of external cost calculations. Finally detailed time series data on freight transport should be collected to support these future research tracks.     

On the use of RFID in the management of reusable containers in closed-loop supply chains under stochastic container return quantities

This paper studies a closed-loop supply chain that uses containers for transporting products from a supplier to a retailer. At the retailer, used containers are collected and returned to the supplier. The supplier inspects returned containers, and either repairs and reuses or disposes them. This paper studies the case where the fraction of containers that are returned to the supplier is stochastic, and where an RFID system can be used to support the tracking of container positions in the supply chain. The use of RFID leads to improved information on the return of containers and better return predictability as well as higher return rates, which we model as an increase in the mean return rate of containers and a reduction in return variance. The paper first develops a mathematical planning model for this scenario, and it then studies how the use of RFID impacts the performance of the system. In addition, it analyzes under which conditions the use of RFID is economical, and in which situations traditional container systems should be preferred.     

Network analysis of container barge transport in the port of Antwerp by means of simulation

Inland navigation plays an important role in the hinterland access of the port of Antwerp. In this paper alternative bundling strategies for container barge transport in the port of Antwerp are analyzed. Four alternative hub scenarios are simulated and compared with the current situation with respect to the operational characteristics of the network. Discrete event simulation is used to analyze the impact on waiting times and capacity utilization at potential hubs and at sea terminals. The hub scenarios under investigation are the organization of an intermodal barge hub on the right river bank, an intermodal hub on the left river bank, a first multihub scenario with a local collection/distribution network and a potentially improved multihub scenario taking into account the specific structure of the port of Antwerp. The second multihub scenario offers most opportunities for reducing the turnaround time of all inland terminals. All hub scenarios lead to important efficiency improvements in the handling of barges at sea terminals.     

A review of Short Sea Shipping policy in the European Union

Short Sea Shipping (SSS) has attracted a lot of attention in the European Union in the last 15 years. It is considered as a mode favoured to alleviate road congestion. Alas, promises have not been met and cargo transfers have not reached their objectives yet, despite strong financial will and a programme for modal shift implemented by the European Union (EU). The hypothesis raised by this paper is that Short Sea Shipping has not been well defined in the EU and market potential for modal shift from land to sea has been overestimated. Therefore, this has a great impact for policy-making. Studies have covered many topics such as its implementation using case studies, cost-benefit analysis compared to land-transport modes, general European shipping policy and its environmental contribution. Therefore, little has been written on the role of public institutions in its implementation and no critical assessment of the success of supporting public programme in the EU has been done. This paper explains how the lack of a final definition has led to misadapted public policies favouring modal transfer in the EU and how misknowledge of SSS markets has led to the overestimation of the modal shift potential.     

Container Ocean-transportation System Design with the factors of demand fluctuation and choice inertia of shippers

This paper introduces an optimization model (COSDM) for a Container Ocean-transportation System with the objective of maximizing the revenue of a liner company while taking into account the seasonal fluctuation in transportation demand and the choice inertia of shippers. The COSDM optimizes shipping network design and fleet deployment simultaneously, and it optimizes plans for changing the shipping network and for distributing slots in ships based on the fluctuation in demand and the characteristics of the shippers’ choice inertia. To solve COSDM, a heuristic algorithm is created that combines Genetic Algorithm and Simplex Method. The results show that the COSDM gives an optimized design scheme of the system that takes into account the stability of transportation services and improves the user experience of shippers while increasing the revenue of the liner company. Moreover, the results also reveal new explanations for the increasing size of container ships.     

The spatial context of transport disadvantage, social exclusion and well-being

Equity has been a major concern of public transport provision and is required by legislation in many countries. Several approaches measure equity in transit supply however none produce a simple system-wide measure of equity performance. A new approach is presented using Lorenz curves to measure the relative supply of transit to the population. Gini coefficients provide a single measure of overall equity using this method. A system-wide assessment of overall transit supply to the population in Melbourne, Australia shows that 70% of the population shares only 19% of the supply (Gini coefficient = .68). When employment is also taken into account, the situation is not much different; 70% of jobs and population share 23% of service (G = .62). In order to gain some understanding of vertical equity, the transit supply was compared between different age, income and vehicle ownership groups. There is some evidence of higher supply for youth and low-income groups in inner Melbourne, and in all parts of Melbourne no-vehicle households lived in areas of higher transit supply. Overall it is unclear how “fair” these distributions are compared to equity in other cities since this is the first time this method has been undertaken. Projects using similar approaches should provide a good basis for establishing comparative equity between cities.     

Dynamics of liner shipping network and port connectivity in supply chain systems: analysis on East Asia

The study of ports in supply chain systems is an emerging area of importance which has drawn more attention from researchers in recent years. This paper presents a new perspective in this research area by examining the calling patterns of container shipping services in order to understand the dynamics of port connectivity and inter-port relationships in the supply chains. Empirical evidence is drawn from four major ports in East Asia, namely Shanghai, Busan, Kaohsiung and Ningbo. The study identifies the shipping capacity, trade routes and geographical regions connected to the ports, shipping lines involved, and the extensity and intensity of inter-port relationships among the four container ports from liner shipping network’s perspective. The findings show that most of the shipping capacity employed on the major east–west trade routes became non-exclusive and involved calls at two or more of the four ports. Port planners, terminal operators and carriers could capitalise on opportunities through exploitation of complementary relationships that exist among the selected ports, such as offering a package for shipping lines to call at a portfolio of terminals owned by the same terminal operator. Policy and research implications as well as recommendations are discussed for various stakeholders concerned with port planning and regional development.     

The effect of continuous improvement capacity on the relationship between of corporate social performance and business performance in maritime transport in Singapore

Drawing on organisational learning theory, this study argues that shipping firms with high continuous improvement capacities have better success in transforming corporate social performance (CSP) into business performance. Survey data were collected from 223 shipping firms in Singapore and analysed using multi-sampling analysis, hierarchical regression modelling, and simple slope analysis. The results support the study’s argument and show that business performance is maximised when continuous improvement programmes targeted at CSP are carried out at a gradual pace and at regular intervals. This implies that shipping firms should adopt a dynamic, value-driven approach to improving CSP.     

Congestion and multimodal transport: a survey of cargo transport operators in the Netherlands

Longer and more frequent traffic jams in the Netherlands are increasing the costs of transporting cargo. Tightly scheduled production systems rely on punctual materials movements, but are congestion-induced delays sufficient to stimulate freight mode switching from road to combined road–rail and road–water movements? A survey of Dutch transport companies revealed an estimated 10% of vehicle operating time spent in congested conditions. The perceived impact on transport operations, consumers and service characteristics are reported. Based on the survey findings, a vehicle cost simulation attributed 7% of transport costs to congestion, increasing the attractiveness of multimodal transport and other solutions.     

做大做强客货运输核心业务增强铁路运输企业市场竞争力

做大做强铁路客货运输核心业务,是新形势下转变铁路发展方式的客观需要,也是促进铁路运输企业可持续发展的必然要求。结合郑州铁路局实际。探讨如何通过提升运输效益、提升运输效率和提升服务质量,做大做强客货运输核心业务,增强铁路运输企业市场竞争力。     

Economies of scale and density in urban rail transport: effects on productivity

This paper examines economies of scale and density in urban rail transport. It isolates the effects of constant and non-constant returns on output and productivity growth using data relating to 17 rail systems in cities around the world. Estimates reveal constant returns to scale but increasing returns to density. The productivity model shows that total factor productivity change has been of great importance in differentiating the output performance of urban rail systems. Our analysis of average labour productivity confirms the importance of shifts to other factors of production and technological change in explaining changing levels of output per worker.     

On the multi-dimensionality and sampling of air transport networks

Complex network theory is a framework increasingly used in the study of air transport networks, thanks to its ability to describe the structures created by networks of flights, and their influence in dynamical processes such as delay propagation. While many works consider only a fraction of the network, created by major airports or airlines, for example, it is not clear if and how such sampling process bias the observed structures and processes. In this contribution, we tackle this problem by studying how some observed topological metrics depend on the way the network is reconstructed, i.e. on the rules used to sample nodes and connections. Both structural and simple dynamical properties are considered, for eight major air networks and different source datasets. Results indicate that using a subset of airports strongly distorts our perception of the network, even when just small ones are discarded; at the same time, considering a subset of airlines yields a better and more stable representation. This allows us to provide some general guidelines on the way airports and connections should be sampled.