A general construction of E(s 2)-optimal large supersaturated designs

A general method for construction of E(s ²)-optimal, two-level supersaturated designs (SSDs) with the equal occurrence property, from supplementary difference sets is introduced. It is proved that SSDs constructed in this way are E(s ²)-optimal. Comparisons are made with previous works and it is shown that the proposed method gives promising results for the construction of E(s ²)-optimal large SSDs.     

Designs for estimating an extremal point of quadratic regression models in a hyperball

This paper is devoted to studying optimal designs for estimating an extremal point of a multivariate quadratic regression model in the unit hyperball. The problem of estimating an extremal point is reduced to that of estimating certain parameters of a corresponding nonlinear (in parameters) regression model. For this reduced problem truncated locally D-optimal designs are found in an explicit form. The result is a generalization of the results of Fedorov and Müller (1997) for onedimensional quadratic regression function in the unit segment. Received February 2002     

Minimal efficiency of designs under the class of orthogonally invariant information criteria

Consider the linear regression model with uncorrelated errors and an experimental design . In the article, we address the problem of calculating the minimal efficiency of with respect to the class of orthogonally invariant information criteria, containing all Kiefers criteria of _p-optimality, among others. We show that the -minimal efficiency of is equal to the minimal efficiency of with respect to a finite class of criteria which generalize the criterion of E-optimality. We also formulate conditions under which a design is maximin efficient, i.e. the most efficiency-stable for criteria from . To illustrate the results, we calculated the -minimal efficiency of _p (in particular D, A and E) optimal designs for polynomial regression on [–1,1] up to degree 4. Moreover, for the quadratic model we explicitly constructed the -maximin efficient design.Acknowledgement. The author would like to thank prof. Pázman as well as an anonymous referee for useful and inspiring comments on earlier versions of this article.Supported by: VEGA grant of the Slovak Agency No. 1/0264/03     

Evaluation of inequivalent projections of Hadamard matrices of order 24

Screening designs are useful for situations where a large number of factors (q) is examined but only few (k) of these are expected to be important. It is of practical interest for a given k to know all the inequivalent projections of the design into the k dimensions. In this paper we give all the (combinatorially) inequivalent projections of inequivalent Hadamard matrices of order 24 into k=3,4 and 5 dimensions, as well as their frequencies. Then, we sort these projections according to their generalized resolution, generalized aberration and centered L₂-discrepancy measure of uniformity. Then, we study the hidden projection properties of these designs as they are introduced by Wang and Wu (1995). The hidden projection property suggests that complex aliasing allows some interactions to be estimated without making additional runs.     

Optimal variance- and efficiency-balanced designs for one- and two-way elimination of heterogeneity

Summary In this paper, a series ofE-optimal non-binary variance balanced (block or row-column) designs and a series ofE-optimal non-binary efficiency balanced (block or row-column) designs are provided in certain broad classes of competing designs. Furthermore, their high efficiencies by the usualA- andD-optimality criteria are shown.     

Top-<Emphasis Type="Italic">k</Emphasis>-lists

Top-k-lists are introduced as sequences of k-dimensional random vectors with ordered components being k largest observations from a sequence of independent identically distributed random variables. Such lists changing in time are natural stochastic models of ranking tables which appear in many situations in real life, when one wants to keep a track of several best results in a given field. Here we study basic properties of top-k-lists as joint distributions, conditional structures, representations, driving examples of top-k-lists from exponential and uniform distributions, asymptotics and a relation to generalized order statistics.     

A note on the uniform distribution on the arcsin points

In his book Pukelsheim [8] pointed out that designs supported at the arcsin points are very efficient for the statistical inference in a polynomial regression model. In this note we determine the canonical moments of a class of distributions which have nearly equal weights at the arcsin points. The class contains theD-optimal arcsin support design and theD ₁-optimal design for a polynomial regression. The results allow explicit representations ofD-, andD ₁-efficiencies of these designs in all polynomial models with a degree less than the number of support points of the design.     

A note on strategies for bandit problems with infinitely many arms

A bandit problem consisting of a sequence of n choices (n) from a number of infinitely many Bernoulli arms is considered. The parameters of Bernoulli arms are independent and identically distributed random variables from a common distribution F on the interval [0,1] and F is continuous with F(0)=0 and F(1)=1. The goal is to investigate the asymptotic expected failure rates of k-failure strategies, and obtain a lower bound for the expected failure proportion over all strategies presented in Berry et al. (1997). We show that the asymptotic expected failure rates of k-failure strategies when 0<b1 and a lower bound can be evaluated if the limit of the ratio F(1)–F(t) versus (1–t)^b exists as t1^– for some b>0.     

M-tests in multivariate models

Summary For testing homogeneity in multivariatek sample model, robust tests based onM-estimators are proposed and their asymptoticx ²-distributions are investigated. FurthermoreM-tests in multivariate regression models are discussed.     

Mean residual life functions of finite mixtures,order statistics and coherent systems

We study properties of the mean residual life functions of finite mixtures. Specifically, we study ordering properties, monotonicity and the limiting behaviour. We show, under some mild conditions, that the limiting behaviour is similar to that of the strongest member (in the mean residual life order) of the mixture. We also consider the case of negative mixtures (i.e., mixtures with some negative coefficients) which is applied to study the behaviour of the mean residual life of order statistics and coherent systems with possibly dependent components. Partially Supported by Ministerio de Ciencia y Tecnologí a under grant BFM2003-02947 and Fundación Séneca under grant 00698/PI/04.     

A method for generating uniformly scattered points on the <Emphasis Type="Italic">L</Emphasis><Subscript><Emphasis Type="Italic">p</Emphasis></Subscript>-norm unit sphere and its applications

Tashiro (Ann Inst Stat Math 29:295–300, 1977) studied methods for generating unform points on the surface of the regular unit sphere. The L _p -norm unit sphere is a generalization of the regular unit sphere. In this paper we propose a method associated with an algorithm for generating uniformly scattered points on the L _p -norm unit sphere and discuss its applications in statistical simulation, representative points of a wide class of multivariate probability distributions and optimization problems. Some examples are illustrated for these applications. This research was supported by The University of Hong Kong Research Grant and a University of New Haven 2005 and 2006 Summer Faculty Fellowships.     

On Minimally-supported <Emphasis Type="Italic">D</Emphasis>-optimal Designs for Polynomial Regression with Log-concave Weight Function

This paper studies minimally-supported D-optimal designs for polynomial regression model with logarithmically concave (log-concave) weight functions. Many commonly used weight functions in the design literature are log-concave. For example, and exp(−x ²) in Theorem 2.3.2 of Fedorov (Theory of optimal experiments, 1972) are all log-concave. We show that the determinant of information matrix of minimally-supported design is a log-concave function of ordered support points and the D-optimal design is unique. Therefore, the numerically D-optimal designs can be constructed efficiently by cyclic exchange algorithm.     

Efficiency and productivity change in Ukrainian health care

The study analyses technical efficiency and efficiency change of 193 community hospitals and polyclinics across Ukraine, for the years 1997–2001. These facilities are a subset of the medical institutions in rural Ukraine; they are identical w.r.t. their function in the health system and share the same departmental structure. The data comprise the number of beds in the hospitals, the number of staff employed in the hospitals as well as the polyclinics connected to the hospitals, the number of inpatient and outpatient admissions as well as the number of surgical procedures, lab tests, X-rays performed and the number of deaths and deaths after surgery. Because of the known sensitivity of traditional nonparametric frontier estimators to outlier observations, we employ an order-m estimator, a robust technique, to assess the efficiency of these health care providers as well as changes of their productivity time. The efficiency scores are calculated with an output-oriented model; they are close to unity for hospitals whereas polyclinics seem somewhat less efficient. The Malmquist-indices averaged over all observations are close to unity indicating that productivity does not change over during our observation period. But, depending on the period and the region, substantial deviations from unity can be observed.

When does defection pay?

The present paper investigates cluster adjustment to changing economic environments by focussing on the role and stability of institutional arrangements in their local culture. It postulates two idealtypical local cultures where firms act in the common (collective) or in their own interest (egoistic). By comparing adjustment performance and stability for both types, the model finds that clusters in very volatile environments are unlikely to exhibit collective local cultures as these are unstable and provide only limited benefits for adjustment performance. Clusters facing more stable environments are more likely to show collective local cultures as these increase adjustment performance and are more stable against individual defection. Both findings suggest that collective local cultures in clusters can be relatively stable for limited environment volatility.     

$${\phi_p}$$-optimal designs for a linear log contrast model for experiments with mixtures

A mixture experiment is an experiment in which the k ingredients are nonnegative and subject to the simplex restriction on the (k − 1)-dimensional probability simplex S ^k-1. In this work, an essentially complete class of designs under the Kiefer ordering for a linear log contrast model with a mixture experiment is presented. Based on the completeness result, -optimal designs for all p,−∞ ≤ p ≤ 1 including D- and A-optimal are obtained, where the eigenvalues of the design moment matrix are used. By using the approach presented here, we gain insight on how these -optimal designs behave. Mong-Na Lo Huang was supported in part by the National Science Council of Taiwan, ROC under grant NSC 93-2118-M-110-001.     

Economically optimalc- andnp-control charts

In v. Collani (1981, 1986, 1987a and 1987b) simple procedures are developed to determine the approximately optimal economic design of control charts for measurements. Applying these procedures to the case of control charts for attributes, nomograms are obtained from which the approximately optimal design ofc-charts, i.e. charts for defects, is readily available. Furthermore it is shown that this method also provides good approximately optimalnp-charts, i.e. charts for defectives. Research supported by the DFG (Deutsche Forschungsgemeinschaft).     

Manipulation via merging and splitting in claims problems

In claims problems, we study coalitional manipulations via claims merging and splitting. We characterize (division) rules that are non-manipulable via (pairwise) splitting and that also satisfy standard axioms of equal treatment of equals, consistency, and continuity. And we obtain a similar result for non-manipulability via (pairwise) merging.Received: 22 January 2002, Accepted: 5 February 2003, JEL Classification: C70, C71, D70I am grateful to William Thomson for many helpful comments and suggestions. I also thank Murat Sertel and an anonymous referee for many helpful suggestions for the revision. All remaining errors are mine.     

On the finite sample behavior of testing whether new is better than used of a specified age

Hollander, Park and Proschan (1986) proposed a test of new is better than used of a specified age. It is based on large sample normality of the test statistic. There is, however, no study in the literature on its actual size for small and moderate sample sizes. To shed some lights on this, the results of a Monte Carlo simulation study as well as two real data examples are reported and these indicate that the test can have a quite liberal size, especially for small to moderate sample sizes. In order to improve on this weakness, a modified test is proposed and studied. It is noticed that this modified test seems to over-correct the original test to an extent that it becomes unduly conservative sometimes. Hence we propose another modification that combines the original test and the modified test turns out to have its size quite close to the nominal level and is therefore preferable to both the original and modified tests.     

Comparing means of several treatments with a control when one observation exists per treatment

In an one-way analysis of variance with standard assumptions suppose that only one observation exists per treatment. In addition, assume that one of the treatments is a control group. Because of insufficient observations, the variance of the populations cannot be estimated and hence the usual methods for comparing treatments with the control group fail. In this paper, we present a method to compare treatments with a control when one observation exits per treatment. An algorithm is given to estimate the critical values of the test. The power of the test is investigated by a Monte Carlo simulation; numerical studies show that when there is a treatment whose mean is close to the control group, the power of the test is satisfactory.