Influence of the built environment on E-scooter sharing ridership: A tale of five cities

Electric scooter (e-scooter) sharing systems (ESSs) have been widely adopted by many cities around the world and have attracted a growing number of users. Although some studies have explored the usage characteristics and effects of the built environment on ESS ridership using one city as an example, few studies have considered multiple cities to obtain generalizable and robust results. To fill this research gap, we collect the ESS trip data of five cities in the U.S., namely Austin, Minneapolis, Kansas City, Louisville, and Portland, and explore the effects of the built environment on ESS ridership after controlling for socioeconomic factors. The temporal distributions of e-scooter ridership of different cities are similar, having a single peak period on weekdays and weekends between 11:30 and 17:30. In terms of spatial distribution, the ESS ridership is higher in universities and urban centers compared to other areas. Multilevel negative binomial model results show that ESS trips are positively correlated with population density, employment density, intersection density, land use mixed entropy, and bus stop density in the census block group. E-scooter ridership is negatively correlated with the median age of the population in the census block group and distance to the city center. The findings in this article can help operators understand the factors that affect the ridership of shared e-scooters, determine the changes in ridership when the built environment changes, and identify high-ridership areas when ESS is implemented in new cities.     

The built environment and vehicle ownership modeling: Evidence from 32 diverse regions in the U.S.

Vehicle ownership is an important determinant of the travel demand forecasting process. Vehicle ownership models are used by policy makers to identify factors that affect vehicle miles traveled, and therefore address problems related to energy consumption, air pollution, and traffic congestion. For the conventional travel demand forecasting, it logically follows land use forecasting, before trip generation, which is commonly treated as step one. The most critical limitation of the vehicle ownership models, especially in the conventional process, is that they are often related mainly to sociodemographic variables, not so much to built environmental variables. In this study, by pooling regional household travel survey data from 32 diverse regions (almost 92,000 households) of the U.S., and by controlling for socio-demographic and the built environmental variables, we estimated a vehicle ownership model that contributes to the understanding of vehicle ownership and improves the accuracy of travel demand forecasts. Two main findings of this research are: 1) The number of vehicles owned by a household increases with socio-demographic variables and decreases with almost all of the built environmental variables. For the urban planning and design practices, this finding suggests that car shedding occurs as built environments become more dense, mixed, connected, and transit-served. 2) We used both count regression and discrete choice models, and the results suggest that count regression models have better predictive accuracy. The model developed in this study can be directly used for travel demand modeling and forecasting by metropolitan planning organizations.     

Exploring the impact of built environment factors on the use of public bikes at bike stations: Case study in Zhongshan,China

Many countries have implemented public bike systems to promote sustainable public transportation. Despite the rapid development of such systems, few studies have investigated how built environment factors affect the use of public bikes at station level using trip data, taking account of the spatial correlation between nearby stations. Built environment factors are strongly associated with travel demand and play an important role in the success of public bike systems. Using trip data from Zhongshan's public bike system, this paper employed a multiple linear regression model to examine the influence of built environment variables on trip demand as well as on the ratio of demand to supply (D/S) at bike stations. It also considered the spatial correlations of PBS usage between nearby stations, using the spatial weighted matrix. These built environment variables mainly refer to station attributes and accessibility, cycling infrastructure, public transport facilities, and land use characteristics. Generally, we found that both trip demand and the ratio of demand to supply at bike stations were positively influenced by population density, length of bike lanes and branch roads, and diverse land-use types near the station, and were negatively influenced by the distance to city center and the number of other nearby stations. However, public transport facilities do not show a significant impact on both demand and D/S at stations, which might be attributed to local modal split. We also found that the PBS usage at stations is positively associated with usage at nearby stations. Model results also suggest that adding a new station (with empty capacity) within a 300 m catchment of a station to share the capacity of the bike station can improve the demand-supply ratio at the station. Referring to both trip demand models and D/S models, regression fits were quite strong with larger R² for weekdays than for weekends and holidays, and for morning and evening peak hours than for off-peak hours. These quantitative analyses and findings can be beneficial to urban planners and operators to improve the demand and turnover of public bikes at bike stations, and to expand or build public bike systems in the future.     

Examining the influence of stop level infrastructure and built environment on bus ridership in Montreal

We studied transit ridership from the perspective of the transit provider, with the objective of quantifying the influence of transit system operational attributes, transportation system infrastructure attributes and built environment attributes on the disaggregate stop level boardings and alightings by time of day for the bus transit system in the Montreal region. A Composite Marginal Likelihood (CML) based ordered response probit (ORP) model, that simultaneously allows us to incorporate the influence of exogenous variables and potential correlations between boardings and alightings across multiple time periods of the day is employed. Our results indicate that headway affects ridership negatively, while the presence of public transportation around the stop has a positive and significant effect. Moreover, parks, commercial enterprises, and residential area, amongst others, have various effects across the day on boardings and alightings at bus stops. An elasticity analysis provides useful insights. Specifically, we observe that the most effective way to increase ridership is to increase public transport service and accessibility, whereas enhancements to land use have a smaller effect on ridership. The framework from our analysis provides transit agencies a mechanism to study the influence of transit accessibility, transit connectivity, transit schedule alterations (to increase/reduce headway), and land-use pattern changes on ridership.     

Exploring the effects of the rural built environment on household car ownership after controlling for preference and attitude: Evidence from Sichuan,China

With the rapid infrastructure development and economic growth in China, household car ownership in the country's rural areas has changed dramatically in the past 16 years. The total number of cars owned by households in rural areas is currently 12 times higher than it was 16 years ago. The exploration of the effects of the built environment on household car ownership in China's rural areas is worthwhile. However, few studies have investigated this topic. To fill in the research gap, this work collected 374 household data from rural areas in China to examine the effects of the built environment in Sichuan's rural areas on the number of cars in a household. It considered family structure, socioeconomic characteristics, and individual's perceptions of the built environment, preferences towards the built environment and attitudes towards car ownership (shortened to perceptions, preferences and attitudes from now on). Geographic information system (GIS) technology, combined with on-site measurement, was used for data collection. The multinomial logit model was applied for estimation. Household structure and the built environment (including the perceived built environment and the objective built environment) significantly influence the number of cars in a household. By contrast, preference and attitude attributes have less influence on car ownership. Most of the findings are in line with the literature in the context of Chinese cities. Nevertheless, new results are also found. For example, rural hukou, and building density have significant positive impacts on household car ownership in China's rural areas, which is in contrast with their effects on cities. As the first study on rural areas in China, this research provides some insights for rural planners and policymakers to understand better the relationship between built environment and household car ownership.     

An examination of the factors that impact upon multiple vehicle ownership: The case of Dublin, Ireland

This paper examines the characteristics of households with multiple car ownership in Dublin, Ireland. Data from the 2006 Census of Ireland are analysed to ascertain the characteristics of these households. The analysis of multiple car ownership presented herein examines individual specific, transport availability, and household characteristics to provide an indication of the individuals most likely to have access to more than one vehicle. Understanding the characteristics of households with more than one car is important for many reasons, such as how policies for emissions reductions or pricing regimes might affect households. Ireland, like many countries, has recently launched a number of electric vehicle and car sharing schemes. Traditionally these schemes have been aimed at reducing multiple car ownership, therefore it is important to develop an understanding of the households that would most likely give up an extra car and use a car sharing scheme or an electric vehicle. Also from a sustainability point of view, greater levels of car ownership can result in unsustainable transport patterns.This paper examines the Census data using a multinomial logit regression model to determine the relationships between multiple car ownership levels and several household characteristics. The findings of the paper demonstrate that occupation, public transport availability and residential density all have an impact upon the decision to own more than one vehicle.     

Operationalizing the neighborhood effects of the built environment on travel behavior

Evidence of a connection between the built environment and individual travel behavior is substantiated by multidisciplinary research. In general, compact development patterns exhibiting high concentrations of activity locations and a traditional street design support sustainable travel. However, uncertainty in the magnitude of this connection remains due to how the built environment has been operationalized, usually at a geographic boundary chosen out of convenience. This Portland, Oregon study uses household travel survey data to systematically examine variation in the magnitude of this association when measuring land development pattern, urban design, and transportation system features at various scales. Specifically, this study measures 57 built environment features describing an individual's trip origin and destination at 12 combinations of zonal systems and spatial extents, and assesses their effect on home-based mode choice. First, correlations between individual- and household-level walking behaviors and each combination of indicator and geographic boundary were measured to examine scaling and zoning effects associated with the modifiable areal unit problem (MAUP). These sensitivity test results informed the specification of home-based work and non-work multinomial logit models estimating the effect of sociodemographic, economic, and built environment features on mode choice. Our study findings offer new insight into the MAUP's scaling effect on measuring smart growth indicators and their connection to sustainable travel behavior.     

The impact of topological properties of built environment on children independent mobility: A comparative study between discretionary vs. nondiscretionary trips in Dhaka

Researchers broadly represented the built environment (BE) using geographic and topological indicators. Despite studies have shown that the geographic BE affects children independent mobility (CIM), little is known about the effects of topological BE on CIM. Less so, how the effects vary between discretionary and nondiscretionary CIM trips. The study addresses these gaps using self-reported two-day mobility data of 151 children aged 10–14 years from Dhaka, Bangladesh. Geographic BE data (e.g. land uses, street width, building height) were collected through a virtual BE audit following each route. Topological BE data (e.g. step-depth, integration, choice) were derived in Depthmap X. CIM was measured in a binary scale by checking whether the reported trips were taken independently or not. Three binary logistic regression models (an overall model, a discretionary trip model, and a nondiscretionary trip model) were estimated to determine the effects of geographic and topological BE on CIM, controlling for other confounding effects. The findings demonstrate that both geographic and topological BE affect CIM. However, they affect discretionary and non-discretionary CIM differently – e.g. step-depth, angular connectivity and presence of institutional land use affect only non-discretionary CIM, whereas integration, recreational land use and traffic composition affect only discretionary CIM. The findings highlight that geographical features need to be considered in tandem with topological features of the BE, stratified by destination types, to maximise CIM.     

Investigating the impacts of built environment on traffic states incorporating spatial heterogeneity

Traffic state in the urban network is a direct reflection of the operational efficiency of the urban transportation system. As the busiest period of the day, traffic states during evening peak hours can effectively measure the capacity and efficiency of the transportation system. The primary objective of this study is to investigate how the potential factors affect traffic states during evening peak hours on weekdays. The geographically weighted regression (GWR) approach was proposed to model the spatial heterogeneity of traffic states and visualize the spatial distributions of parameter estimations. Four types of data including traffic state index (TSI) data, point of interests (POIs) data, road features data, and public transport facilities data were obtained from Shanghai in China to illustrate the procedure. According to the results, the GWR model outperformed the ordinary least square (OLS) model in the explanatory accuracy as well as the goodness of fit. The urban form was revealed to have a significant influence on traffic states and strong local variability for parameter estimations was observed. The number of public and commercial POIs, residential POIs, bus routes, bus stops, the average number of lanes, as well as average traffic volumes can significantly affect the traffic states spatially, and the estimated coefficients of each traffic analysis zone (TAZ) vary across regions. The conclusions of this study may contribute to making the planning and management strategies more efficient for alleviating traffic congestion.     

The indirect effect of the built environment on travel mode choice: A focus on recent movers

Many studies have demonstrated that the built environment has a strong impact on people's travel mode choice. However, the built environment also influences elements such as travel distance and car ownership, which might be the true predictors of which travel modes are chosen. In this study, we analyse the effects of changes in residential neighbourhood on changes in travel mode (for commute trips and leisure trips), both directly and indirectly through changes in car ownership, travel distances and travel attitudes. This study applies a structural equation modelling approach using quasi-longitudinal data from 1650 recently relocated residents in the city of Ghent, Belgium. Results indicate that the built environment has strong direct effects on active leisure trips and car use. However, distance (for car use) and attitudes (for active travel) were found to be important mediating variables. In sum, the effect of the built environment on travel mode choice might be more complex than commonly assumed as it partly seems mediated by travel distance and travel attitudes.     

Nonlinear effects of residential and workplace built environment on car dependence

The relationships between the built environment (BE) and car dependence have been thoroughly evaluated, with a primary focus on the residential BE; however, the effects of the BE at workplaces have remained largely unexplored. Little is known about the potential nonlinear effects of the BE at both locations. Using data from a household travel survey in Changchun, China, we aimed to reveal the nonlinear effects of the residential and workplace BE on car dependence by building a gradient boosting decision trees model. The results show that the BE at both locations has strong explanatory power for car ownership and car purchasing intention. With relative contributions values of 17.90% and 18.13%, respectively, the BE at workplaces contributes less to explaining the two dependent variables than the BE at residences. All BE attributes show nonlinear effects on car ownership, and car purchasing intention and the effects differ between residential and workplace locations.     

Analysis of the impact of street-scale built environment design near metro stations on pedestrian and cyclist road segment choice: A stated choice experiment

The mismatch between the design of the micro-scale built environment around metro stations and pedestrian/cyclist preferences causes inconvenience and dissatisfaction. How to design streets near metro stations to provide a walking/biking friendly built environment is still a key question in promoting the use of metro systems. To identify which general attributes of the street-scale built environment are relevant for pedestrians/cyclists and increase walkability/cycle-ability, this paper reports the results of a stated choice experiment in which eight built environment attributes were systematically varied: street segment length, average number of building floors on both sides of the street, retail shops in frontage of streets, street crossing facilities for pedestrians/cyclists, width of sidewalks/bicycle paths, greenery, density of street lamps and crowdedness of pedestrian/cyclists to understand their influence on a road segment choice and preferences. A total of 803 respondents were recruited from Tianjin, China to complete the stated choice experiment through on-street face-to-face interviews. A multinomial logit model was estimated to unravel pedestrian/cyclist preferences using the stated choice data. The results indicate that pedestrians and cyclists have similar preferences for road segments with building lower than 6 floors, 50% retail shops in frontage, more greenery, lamps between 15 m and 30 m, more crossing facilities, wider sidewalk/bike lane and not crowded. These significant built environment attributes can be used in urban design projects with a walking/biking friendly built environment around a metro station.     

Spatially varying impacts of built environment factors on rail transit ridership at station level: A case study in Guangzhou,China

Understanding the relationship between the rail transit ridership and the built environment is crucial to promoting transit-oriented development and sustainable urban growth. Geographically weighted regression (GWR) models have previously been employed to reveal the spatial differences in such relationships at the station level. However, few studies characterized the built environment at a fine scale and associated them with rail transit usage. Moreover, none of the existing studies attempted to categorize the stations for policy-making considering varying impacts of the built environment. In this study, taking Guangzhou as an example, we integrated multi-source spatial big data, such as high spatial resolution remote sensing images, points of interest (POIs), social media and building footprint data to precisely quantify the characteristics of the built environment. This was combined with a GWR model to understand how the impacts of the fine-scale built environment factors on the rail transit ridership vary across the study region. The k-means clustering method was employed to identify distinct station groups based on the coefficients of the GWR model at the local stations. Policy zoning was proposed based on the results and differentiated planning guidance was suggested for different zones. These recommendations are expected to help increase rail transit usage, inform rail transit planning (to relieve the traffic burden on currently crowed lines), and re-allocate industrial and living facilities to reduce the commute for the residents. The policy and planning implications are crucial for the coordinated development of the rail transit system and land use.     

A GPS data-based analysis of built environment influences on bicyclist route preferences

This study examines the effects of built environment features, including factors of land use and road network, on bicyclists' route preferences using the data from the city of Seattle. The bicycle routes are identified using a GPS dataset collected from a smartphone application named “CycleTracks.” The route choice set is generated using the labeling route approach, and the cost functions of route alternatives are based on principal component analyses. Then, two mixed logit models, focusing on random parameters and alternative-specific coefficients, respectively, are estimated to examine bicyclists' route choice. The major findings of this study are as follows: (1) the bicycle route choice involves the joint consideration of convenience, safety, and leisure; (2) most bicyclists prefer to cycle on shorter, flat, and well-planned bicycle facilities with slow road traffic; (3) some bicyclists prefer routes surrounded by mixed land use; (4) some bicyclists favor routes which are planted with street trees or installed with street lights; and (5) some bicyclists prefer routes along with city features. This analysis provides valuable insights into how well-planned land use and road network can facilitate efficient, safe, and enjoyable bicycling.     

Joint analysis of the impacts of built environment on bikeshare station capacity and trip attractions

Shared micromobility is proliferating throughout the world. Many researchers have extensively studied the links among factors representing the built and natural environment and bikeshare demand. One common feature of the existing demand models is that they view bikeshare infrastructure as a group of exogenous variables along with other influential factors. Indeed, this assumption is seldom true in planning practices. Bikeshare system operators usually allocate resources in dense urban areas based upon the environmental correlates. This study contributes to the literature by jointly exploring the determinants of bikeshare station capacity (i.e., the number of docking points) and trip arrivals at the station-level. The research dataset is constructed from the Citi Bike system in New York City in September 2016. The analytical results reveal that the effects of built environment characteristics on bikeshare usage could be carefully considered during the system installation process. We find existing bicycle facilities do not significantly influence the supply of docking points at the station-level. However, they exert direct and positive effects on hourly trip arrivals. The findings improve our understanding of the bikeshare system installation process.     

Exploring built environment correlates of walking distance of transit egress in the Twin Cities

Most studies on walking distance to transit stops either emphasize transit access or do not distinguish transit access and egress. Furthermore, environmental correlates of walking distance may differ by stop location. Using the 2010 Transit Onboard Survey in the Minneapolis and St. Paul Metropolitan Area, this study develops four models to compare the effects of the built environment around transit stops on walking distance of transit egress. Job density is negatively correlated with walking distance, consistent in all four models. Other built environment variables exhibit different impacts by stop location. Particularly, land use mix has positive impacts on walking distance for stops outside of downtown and suburban employment centers whereas job density is more important for suburban centers. Job accessibility and the number of intersections have significant effects on stops within downtown areas but have no significant impacts on stops outside of downtown areas. The number of transit stops has opposite impacts on walking distance for stops within and outside of downtown. Moreover, the built environment tends to have a larger impact on walking distance in downtown areas than non-downtown areas. We then discuss the implications for stop area land use planning and transit stop location choice.     

Spatial-interaction network analysis of built environmental influence on daily public transport demand

Many studies have evaluated the influence of the built environment on public transport. Some studies assign subjective weights to environmental factors, which could oversimplify spatial heterogeneity and overlook the temporal dimension. On the other hand, the spatial-interaction network of public transport system is seldom considered. In this paper, we propose an improved framework to explore how individual factors unevenly affect public transport demand over space and time using a geographically and temporally weighted regression (GTWR) model. The proposed framework extends the local built environmental factors by including two network factors extracted from the spatial-interaction network of the public transport system. We conduct a case study in Beijing, China using 686 traffic analysis zones (TAZs). The actual usage of public transport, namely the public transport index (PTI), is estimated by passenger flow divided by the total amount of human flow in a given TAZ. The daily patterns of the spatial heterogeneity in some selected places in the study area is identified and analyzed. It is also found that the estimated coefficient of the variables of the spatial-interaction network is significantly larger than other static environmental factors, indicating that spatial-interaction network can more effectively reflect spatiotemporal heterogeneity in public transport demand. This study provides a better decision-making support for more accurately identifying which factors are most worthy of development, and when and where they can be implemented to improve public transit services.     

Influences of rural built environment on travel mode choice of rural residents: The case of rural Sichuan

China has entered a stage in which new rural construction and urbanization are rapidly developing. Considerable changes are occurring in rural China, and the built environment is different from that in the past; such difference directly influences the travel mode choice of rural residents. However, our knowledge on how the rural built environment influences the travel mode choice of rural residents in China remains limited. To fill this gap, this study combines on-site measurement methods, geographic information system (GIS) technology, and activity diary survey to obtain basic data regarding the built environment and the daily activities of rural residents. The multinomial logit (MNL) model is used to explore the relationship between the rural built environment and the travel mode choice of rural residents. Results show that building density significantly positively affects private car trips. This finding challenges earlier urban built environment research due to the considerable gap between rural and urban areas. An increase in road density increases the travel frequency of electric bicycles and motorcycles. Accessibility perception and preferences positively affect the probability of choosing to walk. Safety and neighborhood harmony perception positively affect the travel frequency of motorcycles and private cars. Rural residents who prefer a safe living environment are likely to choose walking for their daily travel. Despite the considerable achievements in the construction of rural roads, the frequency of public transportation remains low for rural residents. Therefore, additional attention should be given to the investment and construction of public transport facilities during rural urbanization.     

The influence of the environment on adventure tourism: from motivations to experiences

Inherent in most definitions of adventure tourism is the fact that it takes place in natural outdoor settings. Yet, the influence of this setting on the behaviour of adventure tourism consumers has yet to be adequately addressed. This study, therefore, investigates the relative strength and nature of environmental influences on adventure tourists in both motivations for participation and in the context of the experience. The results are based on questionnaires collected from 459 participants in adventure tourism activities along the southern coast of South Africa. They show that, although the majority of research on adventure tourism focuses on the ‘thrill’ involved, the environment is increasingly recognized as influential. The assessment of motivations, using a push and pull factor approach, demonstrates that the environment not only plays an important role in attracting adventure tourists towards specific destinations, but that they also seek out interactions with nature. In addition, participants suggested that the environment is an especially significant component of their experiences. The fact that the findings demonstrate the importance of the environment in both the motivations and experiences of adventure tourism participants, means that such an approach would make a definite contribution to discussions, planning, and policy linked to the adventure tourism industry.     

A deeper investigation into the effect of the built environment on the use of ridehailing for non-work travel

Ridehailing has become a main-stream mobility option in many cities around the world. Many factors can influence an individual's decision to use ridehailing over other modes, and the growing need of policy makers to make built-environment and regulatory decisions related to ridehailing requires an increased understanding of these. This study develops a model that estimates how the built environment affects the decision to choose ridehailing for making non-work trips, while carefully accounting for a variety of confounding effects that could potentially bias the results (if ignored or improperly incorporated). These include: total number of trips, differences in supply between urban and non-urban areas, residential choice (e.g. urban versus non-urban areas), and household choice of whether to own a vehicle. We use individual-level data from a California travel survey that includes detailed attitude measurements to estimate an integrated choice and latent variable (ICLV) model to properly specify these effects. We include accessibility measures used elsewhere (e.g., Walkscore) plus measures developed for this study. Our analysis estimates the effect of these measures on ridehailing mode share, and how they differ between urban and non-urban areas. This analysis results in several major findings: we confirm that omission of latent preferences for residential location and vehicle ownership from the analysis can lead to biased results; previous studies may have overestimated the complementarity or substitution relationships between public transit and ridehailing by ignoring confounding effects; and even after accounting for other effects, individuals living in vibrant and walkable neighborhoods have a higher mode share for ridehailing (potentially using it instead of active modes).