带引向器的非对称平衡对拓Vivaldi天线设计

设计了一副改进的非对称平衡对拓Vivaldi天线。辐射贴片外边缘用3阶多项式曲线修正，以实现很宽的阻抗带宽。在天线口径处嵌入一个金属贴片作引向器以改善天线的辐射特性。对辐射贴片引入非对称性，使得E面波束偏离得到进一步补偿。实测结果表明，该天线具有极宽的工作带宽，在2~40 GHz内的增益大于0 dBi，且在15~30 GHz内的增益大于14 dBi；E面的波束偏离在6~40 GHz频率范围内小于3°。该天线具有结构简单、尺寸紧凑（44 mm×98 mm）以及方向图稳定等优点。该天线能够较好地应用于相控阵、超宽带系统等。     

新型Ka频段宽角扫描圆极化相控阵天线

提出了一种新型的Ka频段圆极化相控阵天线。天线单元以单馈电开槽贴片天线为基础实现圆极化,通过微带贴片表面加载介质和辅助辐射器,展宽了天线波束宽度并优化了单元轴比。以该天线为阵列单元,采用顺序旋转布阵技术优化得到的2×2子阵,其辐射方向图具有良好的旋转对称性,由该子阵扩展形成的相控阵天线,有效地实现了圆极化宽角扫描特性。以8×8矩形阵列为例,仿真分析了此类二维相控阵天线波束扫描过程中的方向图和极化特性。研究结果表明,天线在工作频段内可实现方位360°、俯仰±60°扫描,扫描范围内天线增益波动和轴比均小于3 dB,同时该天线具有低剖面（高度尺寸为0.08λ0,λ0为空气介质波长）、结构简单、易于加工和集成等特点,非常适合小型化或一体化相控阵天线系统应用。     

采用新型馈电结构的双频宽带导航天线设计

基于新馈电结构,设计了一款覆盖全球四大卫星导航系统的双频宽带贴片天线。采用了一种四分八馈电线路,以8个同轴馈电探针两两相连的方式将两路天线馈电信号合为一路,有效简化了馈电网络的复杂性,同时保证了天线辐射的增益、带宽和轴比性能。该双频辐射贴片单元采用正八边形层叠式结构设计,并在每个天线单元边缘对称添加两组矩形调谐单元,有效增加了天线辐射的波束带宽。该双频天线单元在高频1.482~1.617 GHz（波束带宽155 MHz）和低频1.191~1.252 GHz(波束带宽61 MHz）频段范围内,都能保证良好的辐射增益;高低频的3 dB轴比带宽为-130°~130°,具备良好的圆极化性能。经实物样机对比测试分析,实测结果与仿真结果基本吻合。     

应用于无线USB的小型超宽带阻带天线

设计了一种用于超宽带无线通信系统的小型化天线。该天线贴片尺寸为20 mm×15 mm ×3 mm,采用U形折叠结构和渐变结构相结合,可使天线具有超宽带特性。为 了减小对无线局域网（WLAN）系统5 GHz频带的干扰,天线采取了叉形谐振结构来实现对相应频带的抑制。采用仿真软件分析了该天线阻抗带宽和不同频点处的辐射方向图。仿真和实测结果显示,该天线在25～4.67 GHz和628～12 GHz内S11<-10 dB,在47～6.2 GHz内S11>-10 dB,因而有效产生带阻特性。     

一种新型宽波束低剖面无人机载共形天线

为满足无人机载天线的宽波束低剖面使用需求,设计制作了一种新型宽波束低剖面无人机机 载共形天线。该天线采用新型的L形单极子结构,实现了机载天线的低剖面要求;通过加载 短路探针实现了阻抗匹配和垂直极化工作。设计制作的天线在水平面内准全向辐射,在垂直 面内3 dB波束宽度达到197°。该天线替换了某型无人靶机上传统的单极子天线,经过 实测通信距离得到了显著增加,且通信无盲区更可靠。该天线结构简单,波束宽,剖面低, 特别在高垂直面高速无人机机载通信与测控中有广泛的应用前景。     

新型超宽带单极子天线的设计

研制了一款超宽带印刷单极子天线,通 过在接地板上开方形槽,展宽带宽的同时也改善了带内特性。再在金属贴片顶部开扇形槽, 进一步在高频段展宽了频带。实测结果显示,改进后的天线-10 dB阻抗带宽为2.1～2 5.5 GHz,而原不加槽天线的仿真带宽为2～11.4 GHz,带宽展宽了14 GHz。仿真 和实测结果显示,天线在2.5 GHz、8 GHz、25 GHz的方向图对称性良好。     

小型化宽频带宽阻带微带滤波器的设计

目前研究宽频带微带滤波器的文献很多,但普遍不能同时具有宽频带和宽阻带的性能,且带内回波损耗大,带外抑制差。为此,提出了一种新型的宽频带微带滤波器。该滤波器采用在E型阶跃阻抗谐振器（SIR）中引入U型结构的方法,实现其宽频带宽阻带的性能。对滤波器进行仿真、加工与实测,仿真结果与实测结果吻合良好。加工得到的滤波器3 dB带宽为7.1 GHz,低于-20 dB的高频阻带为9.3 GHz,带内回波损耗低于-23.2 dB,实物尺寸为15 mm×8.5 mm,具有小型化的特点。实测数据表明,提出的滤波器具有良好的性能,在工程领域具有实际的应用价值。     

一种单层双频宽带GNSS测量型天线设计

基于单介质层结构,设计了一款双频宽带全球卫星导航系统（GNSS）测量型天线,天线采用单层高性能轻质复合材料作为双频微带天线共用的辐射介质基板。双频辐射贴片单元采用共面齿轮结构设计,并在天线单元外围设置一系列短路销钉来有效改善天线轴比带宽、低仰角辐射增益等参数,四馈点馈电技术和宽带耦合相移馈电网络的应用保证了天线相位中心稳定度更加可靠。设计结果表明,该双频天线单元大于等于5 dBi的辐射增益带宽均大于245 MHz,高低频3 dB轴比带宽分别为-76°~76°和-116°~116°,低仰角90°增益滑落均小于11.5 dB,经实物样机对比测试分析,实测结果与仿真结果基本吻合。实测频谱显示,该天线工作频段覆盖目前在运行的四大导航系统全部工作频点,较好满足GNSS精确测量与定位系统终端设备应用需求。     

一种共形宽带圆极化螺旋天线的设计

为满足共形天线低剖面特性的要求,设计并制作了一种低剖面的圆极化阿基米德螺 旋天线。天线利用单臂阿基米德螺旋结构实现圆极化辐射,并采用同轴探针馈电。实测结果 表明,天线在2～11.4 GHz的频率范围内回波损耗小于-10 dB,轴比小于3 dB 的频率范围为25～8.4 GHz。该天线结构简单,工作频带宽,且剖面极低,可作为多 种载体的共形天线使用。     

可用于物联网的高隔离度双频MIMO天线

设计了一种高隔离度双频多输入多输出（MIMO）天线,该天线覆盖2.4 GHz和5 GHz无线局域网频带,可以应用于移动物联网之中。天线包含两个相同的辐射单元天线,采用微带馈电的方式进行馈电。单元天线使用单极子天线作为基本辐射器,其包含一根长的和短的单极子天线,分别谐振在低频和高频频段。通过在两个单元天线中间加载T型隔离器提高了单元天线之间的隔离度。天线的辐射振子、馈电以及T型隔离器都印刷在同一块微波板材上,从而方便了天线的制作和加工。仿真结果表明,该天线在1.9~2.8 GHz以及4.7~6.2 GHz频带范围内能实现良好的双频工作特性,天线隔离度近20 dB,可以广泛应用于物联网系统中。     

Brown＇s Blossom in Britain-China

The overall strategic relationship between U.K. and China is ＂better than ever＂, China- Britain relations have maintained good momentum, with increased high-level exchanges and the reinforcement of strategic mutual trust, with more room for growth in the future.     

Challenge and Opportunity Go Hand in Hand——What Global Economic Agitation Brings to the China's Economy?

Domino effects of the global finance agitation As the origin of the subprime crisis,US financial institutions lost USS45 billion last year,accounted for over half of the total US,EU & Japan loss.Since January 15th,Chtigroup released its financial statement of the 4th quarter,showing a net deficit of USS9.83 billion,which marked the hisoric high of its quarterly deficit.     

Sinosteel：Extraordinary Moves in Industry Chess

Among the Fortune 500 firms,more and more images from China emerge out.On the 2008 list,Sinosteel Corporation,a landmark group of China industries quietly squeezes into the candidate line.As the largest steel service ＆ trade enterprise,its sales reached at RMB 111.24 billion,with a year-on-year increase of 83.03 percent,and the profit grew by 180.03 percent.On the Sinosteel 2008 Work Meeting,the president Huang Tianwen uttered,＂In the coming year,we will work for US$20 billion sales,and look forward to getting a position in Fortune 500 firms for ourselves.＂     

Walk Through Unusual Five Years—— An Exhibitor＇s Canton Fair Course

When the 103rd Canton Fair is approaching, an old friend of Canton Fair, Li Ying from Jiangsu prov-ince recollected his past five years＇ experiences to the grand trade meeting. Each year is special, with some unforgettable memories colored by the year.     

Jean-Pierre Duprieu： Willing to Be A Legate of Sino-French Business

Estaing, former French president, Valery Giscard d＇Estaing attended Sino-French Economic Seminar held in Shanghai in early April and said that the world center has shifted from the west to the east with many European and US companies entering into Asia, and China has the ability to play an important role in the world stage. Estaing, naming himself＂French Confucian＂, then said in Chinese that a cook-group includes 10 people in ancient Chinese soldier system and the cook is in charge of cooking for them. And people who belong to the same cook are actually ＂Partners＂.     

China''''s Stock Market Wave

The annual meeting of the World Economy Forum was held in Davos,a little town in Switzerland,on January 23rd to the 27th this year,with the theme"the Power fo Collaborative Innovation",over 2500 celebrates from ture political and cconomic circles of more than 80 countries and challengred logether to talk about the future of the global economy in 2008,A Forum for the problems and challenges that face whole world,some of the keywords which drew attention during the event were:the U.S.subprime mortgage crisis,soaring energy prices,the economic slowdown in the U.S.ermerging economic bodies,authority funds and the general unpredictable nature of the global economy.     

Trade Promotion from Neighborhood

If you are considering to trade with companies in Japan or expanding your .business to Japan, we are ready to help from the very beginning.＂ You will find this greeting at the first sight on the Chinese website of Japan External Trade Organization （JETRO）. JETRO has committed itself in delivering highly efficient and quality services to meet the demand of internal and external customs including Japanese companies, hence winning a good reputation in the international trade arena. In recent years, with its priority in advancing business cooperation in South and East Asia, JETRO has made great achievement in promoting trade between China and Japan. Therefore, China＇s Foreign Trade interviewed Mr. Yoichi Maine, Deputy Director General of JETRO BEIJING.     

Auto Parts Market Potential Coming into Surface

Looking at the increasingly fierce competition in the world auto market. global automobile manufacturing industry, taking Europe, the U.S. and Japan as representatives, is gradually forming a new type of relationship, mutual cooperation between whole vehicle and parts manufacturers. We can clearly see that auto parts manufacturers have become independent from the whole vehicle manufacturing companies, which means that the former structure of auto industry has greatly changed, and a new relationship,     

Public Financial Expenditure——A Reflection of the Livelihood Improvement

In recent years.China's public finance put social construction high on the agenda and attaches more importance on livelihood insurance and improvement.The 2003-2007 public financial expenditure reflects a fact that the government isputting more emphasis on livelihood andissues concerning the people.     

Voices from the MPC and CPPCC

"Crucial for economic growth.energy utilization has its role in all economic sectors and every aspect of people's daily life.Now we are in dire need of a new profession,namely energy manager.We not only need to have passion and responsibility,but also a scientific approach to conserve energy and cut emissions.APpropriate legislation should be in place.and a special profession should be introduced to ensure the implementation of these laws and regulations."