A Production Model With Firm-Specific Temporal Variation in Technical Inefficiency: With Application to Spanish Dairy Farms

This paper introduces a stochastic frontier production model which accommodates firm-specific temporal variation in technical inefficiency. Unlike Cornwell, Schmidt and Sickles (1990), technical inefficiency is not modeled through the intercept of the production frontier, but through an error component model. The proposed model is a generalization of the Battese and Coelli (1992) model, which imposed a common temporal pattern upon all firms. In our application involving Spanish dairy farms, we find that the new model is preferred to the Battese and Coelli (1992) model on the basis of the likelihood ratio test. Results provide a new source of information on the different patterns of technical inefficiency change among the 82 farms in the sample.     

A Metafrontier Production Function for Estimation of Technical Efficiencies and Technology Gaps for Firms Operating Under Different Technologies

This paper presents a metafrontier production function model for firms in different groups having different technologies. The metafrontier model enables the calculation of comparable technical efficiencies for firms operating under different technologies. The model also enables the technology gaps to be estimated for firms under different technologies relative to the potential technology available to the industry as a whole. The metafrontier model is applied in the analysis of panel data on garment firms in five different regions of Indonesia, assuming that the regional stochastic frontier production function models have technical inefficiency effects with the time-varying structure proposed by Battese and Coelli (1992).     

Regulatory Contracts and Cost Efficiency: Stochastic Frontier Evidence from the Italian Local Public Transport

The main objective of this paper is to investigate the way subsidization mechanisms affect the cost efficiency of public transit systems, taking into account the role played by the environmental characteristics of each network. A cost frontier model is estimated for a seven-year panel of 44 Italian transit companies run under two different regulatory schemes (cost-plus or fixed-price), using the approach proposed by Kumbhakar et al. (1991), Huang and Liu (1994) and Battese and Coelli (1995). The main evidence is that, given network characteristics, transit operators with high-powered incentive contracts (fixed-price subsidies) exhibit lower distortions from the minimum costs. Environmental conditions (network speed levels) also have a significant impact on inefficiency differentials and influence the efficacy of incentive regulation. Overall, these results highlight a scope for transport policy to increase X-efficiency. Furthermore, they stress the importance of incentive theory and modern regulatory economics for the production analysis of regulated utilities.     

Assessing bankruptcy prediction models via information content of technical inefficiency

We use a stochastic frontier model with firm-specific technical inefficiency effects in a panel framework (Battese and Coelli in Empir Econ 20:325–332, 1995) to assess two popular probability of bankruptcy (PB) measures based on Merton model (Merton in J Financ 29:449–470, 1974) and discrete-time hazard model (DHM; Shumway in J Bus 74:101–124, 2001). Three important results based on our empirical studies are obtained. First, a firm with a higher PB generally has less technical efficiency. Second, for an ex-post bankrupt firm, its PB tends to increase and its technical efficiency of production tends to decrease, as the time to its bankruptcy draws near. Finally, the information content about firm’s technical inefficiency provided by PB based on DHM is significantly more than that based on Merton model. By the last result and the fact that economic-based efficiency measures are reasonable indicators of the long-term health and prospects of firms (Baek and Pagán in Q J Bus Econ 41:27–41, 2002), we conclude that PB based on DHM is a better credit risk proxy of firms.     

Expansion and Efficiency in Banking: Evidence from Ghana

We use a translog functional form to estimate a stochastic frontier function of cost and profit efficiency (PE) of Ghanaian banks under the Battese–Coelli time‐varying decaying inefficiency parameterization for (unbalanced) panel data. We regressed efficiency estimates on a distance variable controlling for bank size, total cost, and profits. We find that Ghanaian bank PE is worsening, whereas cost efficiency is improving for the period analyzed. Our results show that PE is not related to distance, size, or cost and profitability ratios. Distance is however positively and significantly related to cost efficiency. Cost efficiency is however not influenced by size or cost and profit ratios. Copyright © 2011 John Wiley & Sons, Ltd.     

Panel estimators and the identification of firm-specific efficiency levels in parametric,semiparametric and nonparametric settings

The paper analyzes a number of competing approaches to modeling efficiency in panel studies. The specifications considered include the fixed effects stochastic frontier, the random effects stochastic frontier, the Hausman–Taylor random effects stochastic frontier, and the random and fixed effects stochastic frontier with an AR(1) error. I have summarized the foundations and properties of estimators that have appeared elsewhere and have described the model assumptions under which each of the estimators have been developed. I discuss parametric and nonparametric treatments of time varying efficiency including the Battese–Coelli estimator and linear programming approaches to efficiency measurement. Monte Carlo simulation is used to compare the various estimators and to assess their relative performances under a variety of misspecified settings. A brief illustration of the estimators is conducted using U.S. banking data.     

Technical efficiency and firm heterogeneity in stochastic frontier models: application to smallholder maize farms in Ethiopia

This study estimates the technical efficiency measures of maize producing farm households in Ethiopia using stochastic frontier (SF) panel models that take different approaches to model firm heterogeneity. The efficiency measures are found to vary depending on how the estimation model treats both unobserved and observed firm heterogeneity. Estimates from the ‘true’ random effects (TRE) models that treat firm effects as heterogeneity are found to be identical to those from pooled SF models. Those results differ from the ones generated from the basic random effects (RE) models that treat firm effects as part of overall technical inefficiency. The more flexible generalised ‘true’ random effects (GTRE) model that splits the error term into firm effects, persistent inefficiency, transient inefficiency, and a random noise component indicates the presence of higher levels of persistent inefficiency than transient inefficiency. The basic truncated-normal RE model and heteroscedastic RE model yields similar efficiency estimates. The GTRE model predict persistent efficiency measures similar to those from the basic RE and flexible RE model with environmental variables incorporated in the variance function as well as in the deterministic production frontier. These results imply that the RE and GTRE panel models provide reliable efficiency estimates for our data compared to the TRE models. All the estimated SF models generate comparable production function parameters in terms of magnitude and sign. Overall, the results underscore the importance of scrutinising stochastic frontier models for their reliability of analytical results before drawing policy inferences.

     

Separating Technical Change from Time-Varying Technical Inefficiency in the Absence of Distributional Assumptions

This paper proposes an alternative model for separating technical change from time-varying technical inefficiency. The proposed formulation uses the general index, developed by Baltagi and Griffin (1988), to model technical change in the production frontier function and a quadratic function of time, as in Cornwell, Schmidt and Sickles (1990), to capture the temporal pattern of technical inefficiency. In such a setting, all parameters associated with the rate of technical change and the temporal pattern of technical inefficiency are identified separately. Moreover, the proposed formulation is independent of any distributional assumption concerning the one-sided error term associated with technical inefficiency, and it can be estimated in a single stage with non-linear FGLS. Empirical results based on a translog production frontier, and estimates of technical inefficiency and technical change are presented for the UK dairy sector over the period 1982–1992.     

Technical efficiency in competing panel data models: a study of Norwegian grain farming

Estimation of technical efficiency is widely used in empirical research using both cross-sectional and panel data. Although several stochastic frontier models for panel data are available, only a few of them are normally applied in empirical research. In this article we chose a broad selection of such models based on different assumptions and specifications of heterogeneity, heteroskedasticity and technical inefficiency. We applied these models to a single dataset from Norwegian grain farmers for the period 2004–2008. We also introduced a new model that disentangles firm effects from persistent (time-invariant) and residual (time-varying) technical inefficiency. We found that efficiency results are quite sensitive to how inefficiency is modeled and interpreted. Consequently, we recommend that future empirical research should pay more attention to modeling and interpreting inefficiency as well as to the assumptions underlying each model when using panel data.     

Matching in local labor markets: a stochastic frontier approach

This paper investigates the technical efficiency of labor market matching from a stochastic frontier approach. The true fixed-effects model (Greene J Prod Anal 23:7–32, 2005a; J Econom 126:269–303, 2005b) is utilised in order to separate cross-sectional heterogeneity from inefficiency, and inefficiency terms are modelled following Battese and Coelli (Empir Econ 20:325–332, 1995). The data set consists of almost 17,000 observations from Local Labor Offices (LLOs) in Finland. According to the results, there are notable differences in matching efficiency between regions, and these differences contribute significantly to the number of filled vacancies. If all regions were as efficient as the most efficient one, the number of total matches per month would increase by over 23%. The heterogeneity of the job-seeker stock is an important determinant of matching efficiency: the weight of the composition of the job-seeker stock in the inefficiency terms is on average 85%.

Estimation of a panel data model with parametric temporal variation in individual effects

This paper is an extension of Ahn et al. (J. Econom. 101 (2001) 219) to allow a parametric function for time-varying coefficients of the individual effects. It provides a fixed-effect treatment of models like those proposed by Kumbhakar (J. Econom. 46 (1990) 201) and Battese and Coelli (J. Prod. Anal. 3 (1992) 153). We present a number of GMM estimators based on different sets of assumptions. Least squares has unusual properties: its consistency requires white noise errors, and given white noise errors it is less efficient than a GMM estimator. We apply this model to the measurement of the cost efficiency of Spanish savings banks.     

A Stochastic Frontier Production Function with Flexible Risk Properties

This paper considers a stochastic frontier production function which has additive, heteroscedastic error structure. The model allows for negative or positive marginal production risks of inputs, as originally proposed by Just and Pope (1978). The technical efficiencies of individual firms in the sample are a function of the levels of the input variables in the stochastic frontier, in addition to the technical inefficiency effects. These are two features of the model which are not exhibited by the commonly used stochastic frontiers with multiplicative error structures.An empirical application is presented using cross-sectional data on Ethiopian peasant farmers. The null hypothesis of no technical inefficiencies of production among these farmers is accepted. Further, the flexible risk models do not fit the data on peasant farmers as well as the traditional stochastic frontier model with multiplicative error structure.     

Likelihood ratio tests for model selection of stochastic frontier models

An important issue when conducting stochastic frontier analysis is how to choose a proper parametric model, which includes choices of the functional form of the frontier function, distributions of the composite errors, and also the exogenous variables. In this paper, we extend the likelihood ratio test of Vuong, Econometrica 57(2):307–333, (1989) and Takeuchi’s, Suri-Kagaku (Math Sci) 153:12–18, (1976) model selection criterion to the stochastic frontier models. The most attractive feature of this test is that it can not only be used for testing a non-nested model, but also still be applicable even when the general model is misspecified. Finally, we also demonstrate how to apply this test to the Indian farm data used by Battese and Coelli, J Prod Anal 3:153–169, (1992), Empir Econ 20(2):325–332, (1995) and Alvarez et al., J Prod Anal 25:201–212, (2006).     

On the inefficiency of European socialist economies

This paper aims at comparing macroeconomic performance of three European socialist economies (Hungary, Poland, Yugoslavia) with developing and developed countries during the 1970s and the 1980s. Using panel data for 89 countries, we measure macroeconomic performance with two panel data production frontier models: the WITHIN model proposed by (Cornwell et al J Econom 46:185–200, 1990), and the firm effects model developed by (Battese and Coelli J Prod Anal 3:153–169, 1992). We conclude in favor of the underperformance of socialist countries in relation to developed countries but also to developing countries in most cases, which may be explained by the features of the socialist economic system.

Inference in dynamic stochastic frontier models

An important issue in models of technical efficiency measurement concerns the temporal behaviour of inefficiency. Consideration of dynamic models is necessary but inference in such models is complicated. In this paper we propose a stochastic frontier model that allows for technical inefficiency effects and dynamic technical inefficiency, and use Bayesian inference procedures organized around data augmentation techniques to provide inferences. Also provided are firm‐specific efficiency measures. The new methods are applied to a panel of large US commercial banks over the period 1989–2000. Copyright © 2006 John Wiley & Sons, Ltd.     

Technical Inefficiency Effects Among Paddy Farmers in the Villages of the ‘Office du Niger’, Mali,West Africa

A stochastic frontier production function incorporating a model for technical inefficiency effects (Battese and Coelli, 1995) is applied to field data on paddy farmers from 29 villages in the Office du Niger in Mali. Four conventional factors (land, labor, fertilizer and machinery) are considered as inputs of production. The technical inefficiency effects in the stochastic frontier were related to firm-specific variables, institutional factors, social organisation, ecological considerations and health factors. Data were obtained from an economic survey conducted during two consecutive agricultural seasons (1989 and 1990) on 844 farms of the Office du Niger. The null hypothesis of the absence of technical inefficiency effects was rejected. A supportive institutional environment and a coherent organisation of land use were the best correlates of technically efficiency. The social environment was also found to contribute to technical efficiency of the paddy farmers: within the village, the greater the degree of ethnic cohesion, the greater the efficiency of the farmers. Health status of households had an effect in that healthy families tended to be more technically efficient than unhealthy ones. Farmers with more extensive sorghum cultivation were less efficient as paddy farmers. These results may help agricultural policy makers formulate strategies. Technical efficiency may be improved by intensifying agricultural training regarding one specific crop and, through the control of parasitic diseases which place a burden on family households.     

Fixed and Random Effects in Stochastic Frontier Models

Received stochastic frontier analyses with panel data have relied on traditional fixed and random effects models. We propose extensions that circumvent two shortcomings of these approaches. The conventional panel data estimators assume that technical or cost inefficiency is time invariant. Second, the fixed and random effects estimators force any time invariant cross unit heterogeneity into the same term that is being used to capture the inefficiency. Inefficiency measures in these models may be picking up heterogeneity in addition to or even instead of inefficiency. A fixed effects model is extended to the stochastic frontier model using results that specifically employ the nonlinear specification. The random effects model is reformulated as a special case of the random parameters model. The techniques are illustrated in applications to the U.S. banking industry and a cross country comparison of the efficiency of health care delivery.JEL classification: C1, C4     

A new approach to estimating the metafrontier production function based on a stochastic frontier framework

This paper proposes a new two-step stochastic frontier approach to estimate technical efficiency (TE) scores for firms in different groups adopting distinct technologies. Analogous to Battese et al. (J Prod Anal 21:91–103, 2004), the metafrontier production function allows for calculating comparable TE measures, which can be decomposed into group specific TE measures and technology gap ratios. The proposed approach differs from Battese et al. (J Prod Anal 21:91–103, 2004) and O’Donnell et al. (Empir Econ 34:231–255, 2008) mainly in the second step, where a stochastic frontier analysis model is formulated and applied to obtain the estimates of the metafrontier, instead of relying on programming techniques. The so-derived estimators have the desirable statistical properties and enable the statistical inferences to be drawn. While the within-group variation in firms’ technical efficiencies is frequently assumed to be associated with firm-specific exogenous variables, the between-group variation in technology gaps can be specified as a function of some exogenous variables to take account of group-specific environmental differences. Two empirical applications are illustrated and the results appear to support the use of our model.     

Estimation of stochastic frontier production functions with input-oriented technical efficiency

This paper deals with estimation of input-oriented (IO) technical inefficiency using a stochastic production frontier model. Econometrically the model is similar to a class of models that arise in specifying technical inefficiency in cost-minimizing and profit-maximizing frameworks. The standard maximum likelihood (ML) method that is used to estimate output-oriented (OO) technical efficiency cannot be applied to estimate these models. We use a simulated ML approach to estimate the IO production function and compare results from the IO and OO models, mainly to emphasize the point that estimated efficiency, returns to scale, technical change, etc., differ depending on whether one uses the model with IO or OO technical inefficiency.     

Estimation of a dynamic stochastic frontier model using likelihood-based approaches

This paper considers a panel stochastic production frontier model that allows the dynamic adjustment of technical inefficiency. In particular, we assume that inefficiency follows an AR(1) process. That is, the current year's inefficiency for a firm depends on its past inefficiency plus a transient inefficiency incurred in the current year. Interfirm variations in the transient inefficiency are explained by some firm-specific covariates. We consider four likelihood-based approaches to estimate the model: the full maximum likelihood, pairwise composite likelihood, marginal composite likelihood, and quasi-maximum likelihood approaches. Moreover, we provide Monte Carlo simulation results to examine and compare the finite-sample performances of the four above-mentioned likelihood-based estimators of the parameters. Finally, we provide an empirical application of a panel of 73 Finnish electricity distribution companies observed during 2008–2014 to illustrate the working of our proposed models.