Application and performance impact of stage–gate systems – the role services in the firm’s business focus

Although service innovation is important, knowledge of new product and service development, including the positive effect of stage‐and‐gate‐type systems, has been derived almost exclusively from studies in the manufacturing sector. In the present paper, we address two important questions: How do differences in the firm’s business focus, which describes whether a firm puts more emphasis on products or services in its business activities, influence the usage of such formal innovation processes? Is stage‐and‐gate‐type systems’ impact on innovation program performance contingent on the firm’s business focus? Unlike previous studies, we not only differentiate service and manufacturing by industry classification codes but also apply a continuous measure to take into account the blurring of boundaries between the manufacturing and service businesses. Based on a comprehensive discussion of service‐specific characteristics and their implications for innovation management and using a cross‐industry, multi‐informant sample of innovation programs from 272 firms with 1,985 informants, we find empirical support for firms with a stronger focus on the service business being less likely to use stage‐and‐gate‐type systems. Furthermore, the use of stage‐and‐gate‐type systems fosters innovation program performance, and this effect becomes stronger as the business focus shifts toward services. This result implies that service‐based firms can benefit from stage‐and‐gate‐type systems to a greater extent than product‐based firms. Our research also demonstrates the gap between the desired level of innovation process formalization and its current usage in practice, especially for firms with a dominating service business.     

The Locus of Innovation: The Effect of a Separate Innovation Unit on Exploration,Exploitation, and Ambidexterity in Manufacturing and Service Firms

This paper investigates the effects of having a separate innovation unit on exploration, exploitation, and ambidexterity in manufacturing and service firms according to traditional paradigms of the innovation management discipline that innovation units should be organized in a separate department. Many manufacturing firms have such a unit while few service firms do. This paper sets out to investigate the advantages of having such a unit for exploration, exploitation, and ambidexterity, and whether there are differences between manufacturing and service firms that could help explain why such units are present or absent. The literature suggests that a separate innovation unit has a positive effect on exploration and ambidexterity in manufacturing firms. However, the effect on improving operational activities, that is, exploitation, is unclear. If exploration and exploitation are two ends of a continuum, as the literature suggests, more exploration comes at the cost of exploitation. On the other hand, others have suggested the possibility of an orthogonal relationship, where a separate unit can simultaneously enhance exploration and exploitation. In this paper, the Dutch Community Innovation Survey (CIS) is used to investigate these relationships for manufacturing and service firms, with a question added to the survey regarding the locus of innovation within each firm, that is, mostly within a dedicated innovation unit or dispersed throughout the firm. Our findings show that a separate innovation unit increases exploration, exploitation, and ambidexterity in both manufacturing and service firms. It thereby provides support for the orthogonal view of ambidexterity. A separate unit enhances the ability to exploit and be ambidextrous equally in service and manufacturing firms, but has a weaker positive effect on exploration, and exploratory and ambidextrous performance in service firms. This finding implies that both manufacturing and service firms benefit from having a separate innovation unit, with the advantages being greatest for manufacturing firms. In service firms, such an innovation unit alone may not be sufficient, as such units are expensive to maintain, while they contribute less to ambidextrous performance than in manufacturing firms. Based on the latter finding, future studies should make a distinction between the ability to be ambidextrous in creating exploratory and exploitative innovations, and ambidextrous performance, the ability to gain financially from engaging in both types of activities simultaneously.     

HRM Practices and the Within‐Firm Gender Wage Gap

The effect of HRM practices on the within‐firm gender gap in wages in manufacturing is investigated merging a 1999 survey on work practices among Danish firms to matched employer–employee panel data. Self‐managed teams, project organization and job rotation schemes are the most widely introduced practices. Accounting for non‐randomness in adoption, the pay gap is reduced among hourly paid workers but increases among salaried workers. Considering practices individually, wage gains from adoption accrue to males except for salaried workers in firms that adopt project organization and for hourly paid workers in firms that introduce quality control circles.     

One of many roads to industry 4.0? Technology,policy, organisational adaptation and worker experience in ‘Third Italy’ SMEs

Industry 4.0 (I4.0) is a technological framework and policy programme that emerged in Germany in the 2010s, promising to revitalise manufacturing and revalue work by means of intelligent productive systems. The paradigm's cross-national diffusion raises questions about its context-dependent adaptation. This article focuses on the Italian I4.0 programme and its implementation among medium-sized manufacturing companies in the country's Veneto region. It analyses Italian policy and company strategies through the perceptions and experiences of managers, unionists and workers. The research highlights how a system dominated by small and medium enterprises (SMEs)—one with limited technological investment and without a coordinated system of industrial relations—reshaped the I4.0 policy goals, technological developments and work outcomes. The results show how the features of the productive context are associated with a far less ambitious I4.0 plan, the limited and selective adoption of technology at the level of firms, and modest top-down organisational changes that do not fulfil the promises of the project.     

Perception of value delivered in digital servitization

This paper intends to explore the perception of value delivered in digital servitization in a business-to-business context of incumbent manufacturing firms. We investigate how individual entrepreneurial orientation (IEO) influence and affect the adoption of such digital servitization strategies. The observations are made through a survey and empirical assessment across a couple of large industrial organizations interested in servitization and digitalization. Findings contribute to the existing literature on digital servitization and business model innovation by suggesting that IEO influence perceived value in delivering digital service offers, whereas functional affiliation does not. Further observations suggest that digital capabilities can become a crucial enabler for the perception of value delivered in digital business models by providing swift access to data for affected stakeholders.     

Raising quality consciousness among Chinese manufacturing personnel: Testing the effectiveness of performance management tools

This study draws upon the strategic management control literature, goal-setting, and expectancy theory to address the management of quality in Chinese manufacturing operations. Operating in a transition economy, Chinese managers face specific challenges in adapting management strategies and control systems. Using causal modeling, we examine the implementation of quality strategies through management control and reward systems in 38 manufacturing firms operating in the Pearl River Delta, examining the effects of company size. The results indicate that for larger firms, significant linkages were found between reward systems based on quality outcomes and quality feedback, and in turn, quality feedback was significantly linked to both quality goals and a strategic focus on quality. However, for smaller firms, while significant relationships exist between reward systems based on quality outcomes and the provision of quality goals and feedback, no significant linkages were found between the implementation of management control systems and a strategic focus on quality. This study emphasizes the need to develop more robust theories to address the manufacturing environments of transition economies such as China, as well as the need for additional field research on indigenous firms in Asia.     

Broadband adoption,jobs and wages in the US telecommunications industry

This article evaluates the impact of broadband adoption on wage and employment levels among the local exchange companies in the US telecommunications industry for the period between 1988 and 2001. Broadband is a general purpose technology and its adoption and diffusion is expected positively to impact wages because of the need for higher level skill in its deployment and usage, but can also lead to less human capital usage because of a scale effect. Using the extent of fiber adoption among the local exchange firms as a measure of broadband deployment, it was found that broadband diffusion within and between the firms over time has had a positive and significant impact on wage levels but its impact on employment has been negative. As broadband diffusion increases, with substantial scope available to do so given the low levels of deployment both among the local exchange firms studied and within the United States as a whole, the impact of such diffusion on enhancing wage levels in the sector can be profound.     

Why Do Firms Adopt Profit-Sharing and Employee Ownership Plans?

Profit-sharing and employee ownership in companies have attracted considerable interest, yet there has been little research on factors predicting the adoption and maintenance of these plans. This study uses new data from a survey of 500 US public companies, and panel data on corporate financial variables, to examine factors predicting the presence and adoption of profit- sharing and employee stock ownership plans (ESOPs) in the 1975–91 period. Several findings support productivity-related motivations for such plans (including higher R&D levels among old profit-sharing firms, and recent adoption of job enrichment programmes among new profit-sharing firms), while others support flexibility-related motivations (including higher variance in profits prior to the adoption of profit-sharing plans and ESOPs). Unionized firms were less likely to have either type of plan in 1975, but equally likely to adopt them subsequently (often in concessionary contracts). Comparisons of cross-sectional and panel results illustrate advantages of panel data in disentangling the causes and effects of profit-sharing and ESOPs.     

Getting business-to-business salespeople to implement strategies associated with introducing new products and services

Strategy implementation remains a perennial challenge for firms. While several studies have examined implementation phenomena at the firm level, we know little about what firms can do to get their salespeople to implement strategies for new products and services. Understanding salespeople's individual-level implementation is of particular importance as salespeople are the frontline employees of the firm responsible for implementing strategies with customers. Drawing from motivation, opportunity, and ability (MOA) theory, this examination investigates factors impacting the implementation of strategies associated with introducing new products and services by the salesperson. We use a sample of 277 business-to-business salespeople to test our hypothesized relationships. The findings show both positive and negative moderation among the implementation MOA variables and also provide broad support for their proposed drivers. Additionally, the identified implementation facets of responsiveness and effort are found to positively impact implementation success.     

The impact of environmental management systems on financial performance in fashion and textiles industries

With rising environmental concerns from consumers and stakeholder groups, environmental management has become an important responsibility for today's fashion and textiles manufacturers. The production of fashion and textiles related products often requires high levels of energy and water consumption, and emits large quantities of pollutants to the environment. Therefore, the adoption of environmental management systems (EMSs) is important and could have a significant impact on these firms' operational performance. This study presents empirical evidence on the performance impact of EMS adoption in the fashion and textiles related industries (FTIs). Although EMSs have emerged as a passport to business in the FTIs, their actual impacts on firms' financial performance have not been explored. We reveal that the adoption of ISO 14000, the most popular EMS, improves manufacturers' profitability in the FTIs over a three-year period as measured by return-on-assets (ROA). Based on our sample, we find that profitability improvement started during the implementation stage and continued at least one year after the firm obtained ISO 14000 certification. We also find that profitability improvement is mainly due to improvement in cost efficiency, measured by return-on-sales (ROS). Specifically, certified firms improved up to 2.9% in ROA and 3.3% in ROS over the three-year period since they implemented ISO 14000. We conclude that there is a positive impact of EMS adoption on firms' financial performance in the FTIs.     

What drives post-adoption usage? Investigating the negative and positive antecedents of disruptive technology continuous adoption intentions

This article focuses on the pre-adoption antecedents of disruptive technology continuous adoption intentions at the firm level. Understanding how to make a quality adoption decision, as measured by the firm's satisfaction and intention to continue using the technology after the initial adoption phase, is of critical importance for a buying manager. Given this challenge, a model for disruptive technology continuous adoption intention is proposed that considers the following: pre-adoption interorganizational trust, mimetic competitor pressures, normative supplier pressures, efficiency motives, searching efforts, and post-adoption satisfaction. This model was tested using survey results from 211 recent purchasing managers of a cloud computing service, an emerging disruptive technology. Interestingly, normative pressures from supplying firms prior to adoption led to lower user satisfaction and, consequently, lower intentions to continue adopting and using the technology. Moreover, these pressures were driven by pre-adoption levels of interorganizational trust and mimetic pressures from competitors. Potential adopting managers of a disruptive technology should instead be driven by efficiency-oriented motives and actually aim to increase their searching efforts in order to better understand the disruptive technology prior to adoption. These findings add to prior literature demonstrating the complex interplay of external pressures and internal motives on technology adoption strategies.     

Mapping the antecedents of telework diffusion: firm‐level evidence from Italy

Previous literature has studied telework practices predominantly from the employees' perspective rather than exploring its use at the firm level. With the objective of contributing to reducing this research gap, the relationship between firms' adoption of telework and the firms' technological, organisational and environmental contexts is explored. Data were obtained from a survey conducted between 2005 and 2009 on a sample of 1,134 Italian firms in the Piedmont region. The results show an overall increase in the diffusion of telework primarily attributable to a rise in the adoption of ‘mobile’ work rather than home‐based forms of telework. The results also show that firms that had previously adopted information systems supporting core business processes and knowledge management were more inclined to adopt telework. Telework arrangements were more widely diffused among firms facing a growing and geographically dispersed market demand, and also in the contexts of higher levels of human capital and lower capital intensity.     

Innovation practice and its performance implications in small and medium enterprises (SMEs) in the manufacturing sector: a resource‐based view

Small and medium enterprises (SMEs) in the manufacturing sector make a significant contribution to economic growth, yet most of the research into innovation management in the manufacturing sector has focused on large organizations. This article, however, identifies innovation drivers and their performance implications in manufacturing SMEs. Its study gathered survey data from a sample of 600 Australian SMEs and found that SMEs are similar to large firms with respect to the way that innovation strategy and formal structure are the key drivers of their performance, but do not appear to utilize innovation culture in a strategic and structured manner. This study therefore concludes that SMEs' performance is likely to improve as they increase the degree to which they mirror large manufacturing firms with respect to formal strategy and structure, and to which they recognize that innovation culture and strategy are closely aligned throughout the innovation process. Copyright © 2010 John Wiley & Sons, Ltd.     

Telework, human resource flexibility and firm performance

The results of a survey of 156 Spanish firms indicate that HR development practices are positively associated to the intensity of telework adoption and they moderate the relationship between telework and firm performance. The positive moderator effect of HR development practices indicates that their implementation is necessary not only to facilitate telework adoption but also to enhance the otherwise marginal contribution of telework at organisational level.     

The adoption of radical manufacturing technologies and firm survival

The emergence of dramatically innovative, or radical, new manufacturing technologies can force pivotal and life‐threatening decisions for industry competitors. These technologies can represent a huge cost for adopting firms, but may also offer the chance to achieve competitive advantage through superior manufacturing. While prior research has considered a range of production process decisions (e.g., JIT, mass customization) and outcomes for end‐product technologies, little attention has been given to adoption decisions relative to core manufacturing technologies. This study examines an industry's adoption of major manufacturing technologies over several decades and demonstrates that two groups of contingencies related to adoption (e.g., timing and cumulative effects) have a significant impact on firm performance. Based on a sample of over 1,000 firms, the results provide insights into the effects of adoption timing and ‘manufacturing technology bundles’ on firm survival. We also find that adoption of manufacturing technologies prior to the inflection point of the estimated Bass diffusion curve for each technology leads to significant reduction in firm mortality. Thus, we are able to demonstrate the ability of the Bass model to predict the survival outcomes of firms facing manufacturing technology adoption decisions. The strategic implications of these pivotal decisions are considered. Copyright © 2008 John Wiley & Sons, Ltd.     

Understanding the Antecedents,Contingencies, and Performance Implications of Process Innovation: A Dynamic Capabilities Perspective

This paper examines one of the most important sources of competitiveness in dynamic industries—the capability of firms to introduce process innovations. While the management of product innovation has received considerable theoretical and empirical attention in the literature, our knowledge about how firms become process innovators—and why many firms fail to do so—remains underdeveloped. In order to provide novel insights into the configuration of firms' process innovation activities and their performance implications, this paper draws on the dynamic capabilities approach. More specifically, this study aims to shed light on the antecedents, contingencies, and performance consequences of interfirm differences in process innovation success, that is, firms' propensity and effectiveness of implementing new production, supply chain, or administrative processes. Particular emphasis is placed upon the analysis of potential complementarities or substitution effects between innovation activities such as internal and external research and development, prototyping, external knowledge acquisition, and employee training. Cross‐sectional data from a large‐scale survey of German manufacturing and service firms serves as the basis for testing the hypotheses advanced in this paper. Findings suggest that by engaging in a broad range of different innovation activities, firms can indeed increase the likelihood of achieving process innovation success, which is in turn positively related to firm financial performance. Yet decreasing marginal returns to innovation activities have to be considered as process innovation propensity was found to increase with the number of activities pursued simultaneously only up to a point, after which negative marginal returns set in (inverted U‐shaped relationship). Furthermore, while environmental turbulence was found to have surprisingly little influence when it comes to translating process innovation success into firms' subsequent financial performance, industry membership as well as the nature of the innovation process (i.e., internal generation, external adoption, or cocreation of an innovation) emerged as key contingency factors. These findings have important theoretical as well as practical implications for managing new process introductions.     

Impact of tissue culture banana technology on farm household income and food security in Kenya

While tissue culture (TC) technology for vegetative plant propagation is gradually gaining in importance in Africa, rigorous assessment of broader welfare effects for adopting smallholder farm households is lacking. Using survey data and accounting for selection bias in technology adoption, we analyze the impact of TC banana technology on household income and food security in Kenya. To assess food security outcomes, we employ the Household Food Insecurity Access Scale (HFIAS) – a tool that has not been used for impact assessment before. Estimates of treatment-effects models show that TC banana adoption, combined with improved crop management, causes considerable increases in farm and household income. Technology adoption also reduces relative food insecurity in a significant way. These results indicate that TC technology can be welfare enhancing for adopting farm households. Adoption should be further promoted through upscaling appropriate technology delivery systems.     

Pioneering advantages in manufacturing and service industries: empirical evidence from nine countries

Although one might expect differences between manufacturing and service firms in pioneering advantages, the extent of these differences has not yet been investigated. This is the first cross‐national study that compares such differences in nine countries/regions: the United States, the United Kingdom, Germany, Japan, China, Taiwan, Hong Kong, South Korea, and Singapore. We develop several hypotheses concerning the perceptions of managers of manufacturing firms and service firms regarding the benefits and post‐entry risks of pioneering, and the cost and differentiation advantages accruing to the pioneering firm. We test the hypotheses with data from 2,419 firms representing all nine countries and both industrial sectors. We find that: (1) managers from all countries perceive pioneering to be associated with higher market share and/or profitability; (2) manufacturing firm managers perceive pioneering risks to be significantly more important than do service firm managers; (3) cost and differentiation advantages of pioneering are, for the most part, more significant to manufacturing than to service firm managers; (4) Western manufacturing firm managers perceive the cost advantages to be more important than Asian Pacific manufacturing firm managers. We conclude by presenting the managerial implications of our findings. Copyright © 1999 John Wiley & Sons, Ltd.     

Learning to let go: Social influence,learning, and the abandonment of corporate venture capital practices

Research summary: This study examines the abandonment of organizational practices. We argue that firm choices in implementing practices affect how firms experience a practice and their subsequent likelihood of abandonment. We focus on utilization of the practice and staffing (i.e. career backgrounds of managers), as two important implementation choices that firms make. The findings demonstrate that practice utilization and staffing choices not only affect abandonment likelihood directly but also condition firms' susceptibility to pressures to abandon when social referents do. Our study contributes to diffusion research by examining practice abandonment—a relatively unexplored area in diffusion research—and by incorporating specific aspects of firms' post‐adoption choices into diffusion theory. Managerial summary: When do firms shut down practices? Prior research has shown that firms learn from the actions of other firms, both adopting and abandoning practices when their peers do. But unlike adoption decisions, abandonment decisions need to account for firms' own experiences with the practice. We study the abandonment of corporate venture capital (CVC) practices in the U.S. IT industry, which has experienced waves of adoption and abandonment. We find that firms that make more CVC investments are less likely to abandon the practice, and are less likely to learn vicariously from other firms' abandonment decisions, such that they are less likely to exit CVC when other firms do. Staffing choices also matter: hiring former venture capitalists makes firms less likely to abandon CVC practices, while hiring internally makes abandonment more likely. Plus, staffing choices affect how firms learn from the environment, as CVC managers pay attention to and learn more from the actions of firms that match their work backgrounds; i.e., firms that staff CVC units with former venture capitalists are more likely to follow exit decisions of VC firms, while those that staff with internal hires are more likely to follow their industry peers. Our results suggest that firms wanting to retain CVC practices should think carefully about the implementation choices they make, as they may be inadvertently sowing seeds of abandonment. Copyright © 2015 John Wiley & Sons, Ltd.     

Services, products, and the institutional structure of production

This paper revisits the product-service distinction from an institutional perspective. Much of the literature in marketing and management has focused on the intrinsic characteristics of services with a view to derive implications for the management of service-based firms. Our key argument is that the quest for foundational differences between products and services is misguided. What counts as a product or a service is dependent on the nature of producer-user interactions and the institutional structure of production rather than on any essentialist feature of products or services. Furthermore, we develop the argument that services play an increasingly important role in manufacturing firms and we explore the reasons that underpin this trend.