共查询到19条相似文献,搜索用时 156 毫秒
1.
针对战术跳频电台通信同步问题,在分析若干跳频同步方法的基础上提出了一种组合同步方法,并将收发双方维护的同步头频率组从一维扩展至二维,增强了同步头频率的抗干扰性.性能分析表明,此方法同步时间短、同步概率高,适用于战术跳频电台. 相似文献
2.
探讨了宽频段电台机内干扰频点的来源、产生机理及途径。应用频率设计流程,分析
了宽频段电台机内干扰与时钟、本振等主要设计要素的关系,提出了一种新的频率流程设计
思路及消除机内干扰频点的方法。工程应用表明,宽频带电台的机内干扰频点控制在总工作
点数的0.2%以内。 相似文献
3.
4.
分析了跳频通信电台共址干扰的形成原因以及共址干扰对跳频通信的影响,提出了解决跳
频通信共址干扰的技术措施,为解决机载平台或车载平台配置多部跳频电台时的电磁兼容
问题提供了参考。 相似文献
5.
6.
7.
8.
提出了一种基于PC/104的跳频电台自动检测系统,阐述了其实现方法。该系统利用PC/104作为控制中心,自动控制跳频电台、激励源和综测仪等设备,实现自动测试,分析测试结果,进行故障隔离,判断电台的健康情况。实验结果表明,本系统的测试误差小于3%。 相似文献
9.
针对线性调频(LFM)脉冲压缩雷达易受移频欺骗干扰影响的问题,提出了基于移频检测的起始频率捷变LFM雷达抗干扰方法。通过分析匹配滤波器参考函数、目标回波信号和干扰信号在频域的相对位置,利用脉间LFM信号起始频率不同的特点,将接收信号进行移频,使得目标回波信号分量无脉压输出,从而确定干扰信号分量在时域的位置,通过时域选通对未进行移频的接收信号脉压结果中的干扰进行滤除达到抗干扰目的。仿真分析了移频检测抗干扰性能,结果验证了所提方法的有效性。 相似文献
10.
11.
12.
13.
一超短波电台在湿热试验中无信号输出,经过分析验证,发现三防漆厚度增加是电台高放调谐回路发生偏移,导致故障的主要原因。通过理论分析和试验数据,阐明了三防漆厚度引起电台失谐的机理,以此对电台的设计和生产提供工艺指导。 相似文献
14.
为识别混合在接收机热噪声中的人为噪声干扰信号,提出了基于TSK(Takagi-Sugeno-Kang)模糊集合的干扰检测方法。首先将无干扰环境下信道热噪声数据和有人为噪声干扰下的混合噪声数据组合成训练数据序列,利用训练序列对TSK模糊集合模型进行训练,调节模型中规则的多项式系数,使TSK模糊模型对接收信号中的噪声特性与干扰判决之间建立确定函数关系,实现对噪声干扰的检测。通信电台的实验验证表明:尽管接收机的自动增益控制将外部噪声干扰缩小到与本机噪声相当水平,所提方法仍能有效检测出信道中是否有人为噪声干扰存在。 相似文献
15.
Practitioners face two significant issues: product inaccuracy and transparency in supply chain management. Blockchain is a highly secure and trustworthy means of storing data. Radio frequency identification incorporation is essential if reliability is at a low level. Incorporating radio frequency identification can improve supply chain management in terms of product's visibility for the best replenishment strategy. A production and replenishment coordination via mathematical modeling is visualized through a three-echelon supply chain with a non-reliable production process, and the retailer deals with misplacement issues. The manufacturer handles the inventory flowing reversely and is responsible for proper end-of-life treatment, either repairing or remanufacturing. Repairs are sold in bulk on the secondary market, and remanufactured items are used to prevent retailers' shortages. In this model, radio frequency identification technology on the physical surface is combined with a blockchain on the cyber surface, containing all the information about the product, including its location and attributes. A comparative study is provided for the traditional supply chain with misplacement versus a blockchain-based supply chain with radio frequency identification. An analytical approach is used to arrive at the optimum policy for the practitioners, and numerical analysis illustrates the problem. Numerical experiments indicate that the technology is highly profitable for supply chain management. Radio frequency identification technology can increase profit by up to 61%. After discrepancy, holding cost is the second most sensitive parameter for the profit function. If the holding cost is higher, profit can be increased by 40% using radio frequency identification and blockchain. The negative effect of misplacement is reduced with an increasing demand rate, but the reduction rate is very slow. The choice of not adopting radio frequency identification can only be successful if demand is so high that it can reduce the effect of misplacement. 相似文献
16.
介绍了AD9858在超短波无线电通信领域中的一种应用.基于AD9858设计一种频率合成器,该频率合成器采用"DDS 倍频"的方案,具有相噪低、跳速快等优点,可用于超短波无线电通信系统. 相似文献
17.
考虑到无线电频谱资源日益紧缺,提出了一种基于组间组内协作传输的多播组新机制,涉及多个多播组并使用同一频谱资源以协作方式传输信息。基于认知无线网络中该机制,研究了系统的资源优化配置,理论分析得出了功率分配方案,进而讨论了系统加权总传输速率的优化,同时考虑了主用户和认知用户之间信号干扰及功率限制对传输速率的影响,最优化用户性能。仿真结果表明,优化方案下多播组传输速率随用户人数的增加而上升,达到最优化用户服务质量;当功率限制时,通过设置加权因子,能够保证主用户拥有良好的通信性能。 相似文献
18.
19.
随着国际经济的高速发展,RFID信息技术在各个领域里的应用中的电波频率国际标准化的研究和制定,各国家政府和地区经过调整已做规划,RFID的频率使用大致在860M~960MHz频段。所以UHF频段的RFID技术将服务于全球已经成为事实。 相似文献