A nonsymmetric sequential test

A one-sided testing problem based on an i.i.d. sample of observations is considered. The usual one-sided sequential probability ratio test would be based on a random walk derived from these observations. Here we propose a sequential test where the random walk is replaced by Lindleys random walk which starts anew at zero as soon as it becomes negative. We derive the asymptotics of the expected sample size and the error probabilities of this sequential test. We discuss the advantages of this test for certain nonsymmetric situations.Acknowledgement. The authors thank the referee for helpful comments and suggestions. Their research was supported by the German Research Foundation (DFG) and the Russian Foundation for Basic Research (RFBR).     

On sequential comparisons of means of first-order autoregressive models

The problem of estimating a linear combination,μ, of means ofp-independent, first-order autoregressive models is considered. Sequential procedures are derived (i) to estimateμ pointwise using the linear combination of sample means, subject to a loss function (squared error plus cost per observation), and (ii) to arrive at a fixed-width confidence interval forμ. It is observed that in the case of point estimation we do not require a sampling scheme, where as in the case of interval estimation we do require a sampling scheme and a scheme similar to the one given in Mukhopadhyay and Liberman (1989) is proposed. All the first order efficiency properties of the sequential procedures involved here are derived. This paper is an extension of results of Sriram (1987) involving one time series to multiple time series. Research supported by AFOSR Grant number 89-0225.     

Efficient tests of long‐run causation in trivariate VAR processes with a rolling window study of the money–income relationship

This paper develops a simple sequential multiple‐horizon non‐causation test strategy for trivariate VAR models (with one auxiliary variable). We apply the test strategy to a rolling window study of money supply and real income, with the price of oil, the unemployment rate and the spread between the Treasury bill and commercial paper rates as auxiliary processes. Ours is the first study to control simultaneously for common stochastic trends, sensitivity of test statistics to the chosen sample period, null hypothesis over‐rejection, sequential test size bounds, and the possibility of causal delays. Evidence suggests highly significant direct or indirect causality from M1 to real income, in particular through the unemployment rate and M2 once we control for cointegration. Copyright © 2007 John Wiley & Sons, Ltd.     

Nonlinear IV unit root tests in panels with cross-sectional dependency

We propose a unit root test for panels with cross-sectional dependency. We allow general dependency structure among the innovations that generate data for each of the cross-sectional units. Each unit may have different sample size, and therefore unbalanced panels are also permitted in our framework. Yet, the test is asymptotically normal, and does not require any tabulation of the critical values. Our test is based on nonlinear IV estimation of the usual augmented Dickey–Fuller type regression for each cross-sectional unit, using as instruments nonlinear transformations of the lagged levels. The actual test statistic is simply defined as a standardized sum of individual IV t-ratios. We show in the paper that such a standardized sum of individual IV t-ratios has limit normal distribution as long as the panels have large individual time series observations and are asymptotically balanced in a very weak sense. We may have the number of cross-sectional units arbitrarily small or large. In particular, the usual sequential asymptotics, upon which most of the available asymptotic theories for panel unit root models heavily rely, are not required. Finite sample performance of our test is examined via a set of simulations, and compared with those of other commonly used panel unit root tests. Our test generally performs better than the existing tests in terms of both finite sample sizes and powers. We apply our nonlinear IV method to test for the purchasing power parity hypothesis in panels.     

Distributional and Inferential Properties of the Estimated Precision Cp Based on Multiple Samples

Process precision index C_p has been widely used in the manufacturing industry to provide numerical measures on process potential. Pearn et al. (1998) considered an unbiased estimator of C_p for one single sample. They showed that the unbiased estimator is the UMVUE. They also proposed an efficient test for C_p based on one single sample, and showed that the test is the UMP test. In this paper, we consider an unbiased estimator of C_p for multiple samples. We show that the unbiased estimator is the UMVUE of C_p, which is asymptotically efficient. We also consider an efficient test for C_p, and show that the test is the UMPtest for multiple samples. The practitioners can use the proposed test on theirin-plant applications to obtain reliable decisions.     

Multivariate multistage methodologies for simultaneous all pairwise comparisons

We consider the problem of constructing simultaneous fixed-width confidence intervals for all pairwise treatment differences μ₁−μ _J , in the presence ofk(≥2) independent populationsN _p (μ₁,Σ), 1≤i≠j≤k. Appropriate purely sequential, accelerated sequential and three-stage sampling strategies have been developed and variousfirst-order asymptotic properties are then derived when Σ _pxp is completely unknown, but positive definite (p.d.). In the two special cases when the largest component variance in Σ is a known multiple of one of the variances or Σ=σ² H where σ(>0) is unknown, butH _pxp is known and p.d., the original multistage sampling strategies are specialized. Under such special circumstances, associatedsecond-order characteristics are then developed. It is to be noted that our present formulation and the methodologies fill important voids in the context of multivariate multiple comparisons which is a challenging area that has not yet been fully explored. Moderate sample performances of the proposed techniques were very encouraging and detailed remarks on these were included in Mukhopadhyay and Aoshima (1997).     

A simple and effective scanning rule for a multi-channel system

We consider a multi-channel system in which one apparatus makes a sequence of observations, one at a time. By means of scanning, i.e. selecting a channel to be analyzed at any instant and deciding to stop at some stage, it is required to determine the channel in which there is the signal with prescribed constraints on error probabilities. A simple scanning rule, based on a cyclic application of a sequential probability ratio test (SPRT) is proposed for this problem. It is proved that in the case of Brownian motion, the expected scanning time of this rule is equal to the one of the optimal scanning rule (which is known only for this case). The simple structure of this rule permits to obtain corrected Brownian approximations for its characteristics in the case of exponential family of distributions. The same procedure is used in multi-channel change point problem.     

Properties of a distribution-free two-stage two-sample median test

Abstract  In this paper we consider a class of distribution-free two-stage two-sample median tests. These procedures are based on a fixed size sample from one population, while the observations from the second population are collected in a truncated sequential fashion. Necessary tables are provided enabling us to select a particular member from the class such that arbitrarily preset power levels are approximately obtained. We also present asymptotic expressions and tables for the expected number of observations from the second population. Finally, comparisons between the asymptotic version of this two-stage median test and the binomial sequential probability ratio test due to W ald (1947) are discussed.     

Increasing sample sizes do not always increase the power of UMPU-tests for 2×2 tables

We consider the uniformly most powerful unbiased (UMPU) one-sided test for the comparison of two proportions based on sample sizes m and n, i.e., the randomized version of Fisher's exact one-sided test. It will be shown that the power function of the one-sided UMPU-test based on sample sizes m and n can coincide with the power function of the UMPU-test based on sample sizes m+1 and n for certain levels on the entire parameter space. A characterization of all such cases with identical power functions is derived. Finally, this characterization is closely related to number theoretical problems concerning Fermat-like binomial equations. Some consequences for Fisher's original exact test will be discussed, too.     

Sample size and the Binomial CUSUM Control Chart: the case of 100% inspection

The Binomial CUSUM is used to monitor the fraction defective (p) of a repetitive process, particularly for detecting small to moderate shifts. The number of defectives from each sample is used to update the monitoring CUSUM. When 100% inspection is in progress, the question arises as to how many sequential observations should be grouped together in forming successive samples. The tabular form of the CUSUM has three parameters: the sample size n, the reference value k, and the decision interval h, and these parameters are usually chosen using statistical or economic-statistical criteria, which are based on Average Run Length (ARL). Unlike earlier studies, this investigation uses steady-state ARL rather than zero-state ARL, and the occurrence of the shift can be anywhere within a sample. The principal finding is that there is a significant gain in the performance of the CUSUM when the sample size (n) is set at one, and this CUSUM might be termed the Bernoulli CUSUM. The advantage of using n=1 is greater for larger shifts and for smaller values of in-control ARL. First version: September 1998/Third revision: September 2000     

Sequential control of time series by functionals of kernal-weighted empirical processes under local alternatives

Motivated in part by applications in model selection in statistical genetics and sequential monitoring of financial data, we study an empirical process framework for a class of stopping rules which rely on kernel-weighted averages of past data. We are interested in the asymptotic distribution for time series data and an analysis of the joint influence of the smoothing policy and the alternative defining the deviation from the null model (in-control state). We employ a certain type of local alternative which provides meaningful insights. Our results hold true for short memory processes which satisfy a weak mixing condition. By relying on an empirical process framework we obtain both asymptotic laws for the classical fixed sample design and the sequential monitoring design. As a by-product we establish the asymptotic distribution of the Nadaraya-Watson kernel smoother when the regressors do not get dense as the sample size increases.Acknowledgements The author is grateful to two anonymous referees for their constructive comments, which improved the paper. One referee draws my attention to Lifshits paper. The financial support of the Collaborative Research Centre Reduction of Complexity in Multivariate Data Structures (SFB 475) of the German Research Foundation (DFG) is greatly acknowledged.     

Fisher information in record data

We present some general results on Fisher information (FI) contained in upper (or lower) record values and associated record times generated from a sequence of i.i.d. continuous variables. For the record data obtained from a random sample of fixed size, we establish an interesting relationship between its FI content and the FI in the data consisting of sequential maxima. We also consider the record data from an inverse sampling plan (Samaniego and Whitaker, 1986). We apply the general results to evaluate the FI in upper as well as lower records data from the exponential distribution for both sampling plans. Further, we discuss the implication of our results to statistical inference from these record data. Received: December 2001 Acknowledgements. This research was supported by Fondo Nacional de Desarrollo Cientifico y Tecnologico (FONDECYT) grants 7990089 and 1010222 of Chile. We would like to thank the Department of Statistics at the University of Concepción for its hospitality during the stay of H. N. Nagaraja in Chile in March of 2000, when the initial work was done. We are grateful to the two referees for various comments that let to improvements in the paper.     

Sequentially testing polynomial model hypotheses using power transforms of regressors

We provide a methodology for testing a polynomial model hypothesis by generalizing the approach and results of Baek, Cho, and Phillips (Journal of Econometrics, 2015, 187, 376–384; BCP), which test for neglected nonlinearity using power transforms of regressors against arbitrary nonlinearity. We use the BCP quasi‐likelihood ratio test and deal with the new multifold identification problem that arises under the null of the polynomial model. The approach leads to convenient asymptotic theory for inference, has omnibus power against general nonlinear alternatives, and allows estimation of an unknown polynomial degree in a model by way of sequential testing, a technique that is useful in the application of sieve approximations. Simulations show good performance in the sequential test procedure in both identifying and estimating unknown polynomial order. The approach, which can be used empirically to test for misspecification, is applied to a Mincer (Journal of Political Economy, 1958, 66, 281–302; Schooling, Experience and Earnings, Columbia University Press, 1974) equation using data from Card (in Christofides, Grant, and Swidinsky (Eds.), Aspects of Labour Market Behaviour: Essays in Honour of John Vanderkamp, University of Toronto Press, 1995, 201‐222) and Bierens and Ginther (Empirical Economics, 2001, 26, 307–324). The results confirm that the standard Mincer log earnings equation is readily shown to be misspecified. The applications consider different datasets and examine the impact of nonlinear effects of experience and schooling on earnings, allowing for flexibility in the respective polynomial representations.     

A generalization of Cochran's procedure for the combining of r×c contingency tables*

Abstract Cochran [3] derives a test of association when k 2 × 2 contingency tables are combined. We show in this paper how to extend Cochran's test to the combining of k r×c contingency tables using a multiple comparison technique similar to the one presented by Dunn [4]. An example is included.     

Deterministic multi-player Dynkin games

A multi-player Dynkin game is a sequential game in which at every stage one of the players is chosen, and that player can decide whether to continue the game or to stop it, in which case all players receive some terminal payoff.We study a variant of this model, where the order by which players are chosen is deterministic, and the probability that the game terminates once the chosen player decides to stop may be strictly less than 1.We prove that a subgame-perfect ε-equilibrium in Markovian strategies exists. If the game is not degenerate this ε-equilibrium is actually in pure strategies.     

Codependent cycles

This paper extends the work of Engle and Kozicki (1993) to test for co-movement in multiple time series when their cycles are not exactly synchronized. We call these codependent cycles and show that testing and estimation in this case will be a Generalized Method of Moments test and estimation procedure. We also show that the Tiao and Tsay (1985) proposed test for scalar components models of order (0, q) can be seen as a test for codependent cycles based on a consistent, but sub-optimal, estimate of the cofeature vector. We assess the small sample performance of the proposed tests through a series of simulations. Finally we apply this test to investigate comovement between durable and non-durable consumption expenditures.     

Tests for multiple change points under ordered alternatives

We consider the problem of testing the null hypothesis of no change against the alternative of multiple change points in a series of independent observations when the changes are in the same direction. We extend the tests of Terpstra (1952), Jonckheere (1954) and Puri (1965) to the change point setup. We obtain the asymptotic null distribution of the proposed tests. We also give approximations for their limiting critical values and tables of their finite sample Monte Carlo critical values. The results of Monte Carlo power studies conducted to compare the proposed tests with some competitors are reported. This research was supported by research grant SS045 of Kuwait University. Acknowledgments. We wish to thank the two referees for their comments and suggestions which have significantly improved the presentation. We are particularly thankful to one of the referees for suggesting the test statistics T_n1 ^* (k) and T_n2 ^* (k).     

Multi-stage point and interval estimation of the largest mean ofK normal populations and the associated second-order properties

Summary We havek independent normal populations with unknown meansμ ₁, …,μ _k and a common unknown varianceσ ². Both point and interval estimation procedures for the largest mean are proposed by means of sequential and three-stage procedures. For the point estimation problem, we require that the maximal risk be at mostW, a preassigned positive number. For the other problem, we wish to construct a fixed-width confidence interval having the confidence coefficient at least 1-α, a preassigned number between zero and one. Asymptotic second order expansions are provided for various characteristics, such as average sample size, associated risks etc., for the suggested multi-stage estimation procedures.     

Monitoring risk in a ruin model perturbed by diffusion

We construct a nonparametric sequential test for the ruin probability and a corresponding change-point test in a risk model perturbed by diffusion. Some limiting properties are derived, which extend and improve on recent results of Conti (Stat Prob Lett 72:333–343, 2005) and Jahnke (Diploma thesis, University of Cologne, 2007). It is shown that the monitoring procedures can be designed such that the tests have an asymptotic prescribed false alarm rate (size) α and power 1. Some results from a small simulation study are also presented.     

The sequential probability ratio test under random censorship

We investigate properties of the sequential probability ratio test when the data are at risk of being censored. It turns out that the stopping boundaries are the same as for completely observable data, but that the average sample size increases as censoring becomes more substantial.