Improving R&D/Marketing relations: R&D's perspective

Abstract
Successful product innovation hinges on close R&D/marketing relationships, especially in technology-based organizations. However, there is evidence that linkage problems are common and when they are not overcome failure is the usual result.
R&D's perspective on what R&D, marketing and senior management can do to improve their relationship with marketing is presented. The recommendations are based on suggestions from R&D directors involved in new product development efforts in 83 technology-based companies. Also presented is how the need for integration has changed over time and where it is going in the future.     

Forecasting core competencies in an R&D environment

This study, carried out in 1998, aimed to develop a method of forecasting core competencies in an agricultural research organization, using the Delphi Technique. First, based on a survey of internal documents and interviews, nine organizational core competencies and their specific components (human competencies) were defined, and expert judges identified. These judges responded to a questionnaire, in which the importance of the future human competencies was assessed and the organization's existing human capacity was evaluated. Means were calculated for both judgements and changes were made in various definitions, based on the experts' comments. Another questionnaire was designed and sent out to an expanded panel of judges to confirm or to revise the priority mean scores obtained or to add scores in the case of competencies that entered later. Factor analysis and reliability scores have demonstrated internal and inter‐competency consistencies. Technological Innovation Management and Geo‐processing appeared as the top priorities and Plant Pathology as the least priority. Priorities for each human competency were also calculated and they have been helpful for decision‐making concerning the selection and graduate training of researchers on the organization studied.     

Uncertainty and stress in an R&D project environment

Abstract
R&D project managers work in an environment in which the uncertainty and complexity of engineering development problems are an important source of episodic job stress. A study of the US. Navy's top major project R&D managers (N = 118) was conducted to test the use of various coping skills and social support as preventive stress management techniques for this population. It was found that perceived environmental uncertainty (PEU) had a direct, positive effect on psychological distress of these project managers while social support had a therapeutic effect on their experience of burnout. While problem focussed coping had a small, positive effect on burnout, neither coping skills nor social support were found to have a primary prevention effect upon perceived environmental uncertainty (PEU).
Engineering managers engaged in high technology R&D are confronted by a wide range of uncertainties, risks and changing demands that give rise to the stress response with its attendant physiological and psychological changes (Asterita, 1985). Adams (1980) has argued that an episodic versus chronic dichotomy of stressors is valuable because it distinguishes between intermittent stressors of finite duration (episodic) and ongoing stressors of indeterminant duration (chronic). This article reports the results of a study of uncertainty as an episodic work stressor for the U.S. Navy's high technology R&D project managers. The results suggest that R&D project managers should develop social support systems and structures to maintain well-being and avert distress and strain.     

Improving Matrix Relationships in R&D Organizations – Marketing Support Services

This study examines the relationship between a support group (electronic fabrication) and the internal users of its services in a large government research laboratory recently converted to a matrix structure. The results reveal complex user decisions for selecting sources of support services and a frequent lack of knowledge of the support group's capabilities. Common usage of external sources of services suggests a need for more aggressive "marketing" by the internal group. Use of market research techniques reveals user decision criteria, decision-maker participation and perceptions of the support unit. It is concluded that results of the study provide management of the support group with information necessary to improve services and group image.     

R&D 'programmes-competencies' matrix: analyzing R&D expertise within the firm

The author suggests that the systematic identification of a firm's technologies opens up the possibility of evaluating, protecting, optimizing, enriching and exploiting these technologies to the full. A firm's technologies fall into two parts: those embodied and exploited in current operations and those evolving from the collective competencies of its R&D staff. The author's aim is to evaluate and describe the firm's R&D competencies.
The identification of R&D competencies proceeds in three steps: tracing the background of the current and past programmes, constructing a programmes/competencies matrix, and deriving an expertise profile. The construction of the matrix is the key activity and requires much care in its execution, if competencies are to be properly defined and truly existing, and if it is to be exhaustive. The author sketches a procedure for constructing a matrix and discusses problems of implementation and draws attention to some of its limitations.
The author claims that such an inventory of expertise could improve the efficiency of the use of the R&D resource, identify a laboratory's strengths and weaknesses, direct R&D into hitherto neglected channels, assist individuals to identify and evaluate their own expertise, justify obtaining funding for building expertise in shortage areas. The method should be considered as a starting point to formulate appropriate strategies to gain access to technology.     

Global R&D management

Abstract
Global R&D management, the management of company R&D effort distributed over different countries, a task that concerns multinational firms, has not been widely studied. The authors have therefore carried out in-depth studies of global R&D conducted by 7 European and 15 Japanese companies. Their objective was to identify 'best practice' and so construct a framework for future research.
The authors' conclusions are as follows. Globalisation, that is decentralisation of R&D, has become a necessity for multinationals as a result of the localisation of competition, of product life becoming shorter than development time, and the need to locate laboratories near sources of new technological know-how.
Because foreign acquisitions often lead to the acquisition of laboratories, questions are raised about how best to integrate them with the administrative practices of the 'home' organization, whether to reorganize them or to close them down. When it is necessary to set up a new foreign-based laboratory deciding its exact location will require the weighing of factors such as whether the activities are to be market or process oriented, where on the R to D scale the activities will be placed, and how far direction of the laboratory's programmes and work will be decentralised.
Global management also demands special attention to the building of an open communication network among the laboratories, the best form of which has yet to be determined. The main concern in human resource management will be how to select and develop an internationally oriented management corps and how to train R&D professionals to communicate across sites.
If globally dispersed R&D laboratories are to be most effectively used then a new framework for their management needs to be developed.     

Towards networked R&D management: the R&D approach of Sonera Corporation as an example

In this paper the authors delineate the challenges of a dynamic environment to R&D management. The authors build on most recent ideas, such as the dynamic capability view of the firm, as strategic foundation for modern R&D management. Collaboration is emphasized as a meta-capability for innovation. These ideas are merged into a 'Networked R&D Management' approach that emphasizes internal and external collaboration networks as critical for companies operating in a dynamic business environment. The approach is illustrated with ICT industry as an example. The implementation of Networked R&D Management is reflected in the illustrative case discussion of R&D management of Sonera Corporation.     

R&D competition versus R&D cooperation in oligopolistic markets with evolving structure

This paper considers investment behavior of duopolistic firms subject to technological progress. It is assumed that initially both firms offer a homogeneous product, but after a stochastic waiting time they are able to implement a product innovation. Production capacities of both firms are product specific. It is shown that firms anticipate a future product innovation by under-investing (if the new product is a substitute to the established product) and higher profits, and over-investing (in case of complements) and lower profits, compared to the corresponding standard capital accumulation game. This anticipation effect is stronger in the case of R&D cooperation. Furthermore, since due to R&D cooperation firms introduce the new product at the same time, this leads to intensified competition and lower firm profits right after the new product has been introduced. In addition, we show that under R&D competition the firm that innovates first, overshoots in new-product capacity buildup in order to exploit its temporary monopoly position. Taking into account all these effects, the result is that, if the new product is neither a close substitute nor a strong complement of the established product, positive synergy effects in R&D cooperation are necessary to make it more profitable for firms than R&D competition.     

Multinationals and the globalization of R&D

In this paper we consider how the location, organization and output of knowledge production evolve within domestic firms following acquisition-FDI in order to understand the aggregate effect on an index of domestically produced innovations. We find strong differences according to how close the acquiring MNE is to the technologically frontier. Frontier MNEs are more likely to close R&D activities in acquired affiliates, but when they are retained they expand employment of high-skilled R&D workers and transfer R&D knowledge. Non-frontier MNEs make fewer changes to R&D. Overall the effect of acquisition-FDI on the domestic innovation index is positive.     

Research and development (R&D) beyond manufacturing: the strange case of services R&D

The share of business research and development (R&D) expenditure stemming from the services sector of the economy has been growing rapidly in many (though not all) OECD countries, according to official statistics. The same data sources also indicate, however, that services contribute less to R&D than would be expected given their large shares of employment and output in national economies. In part, incomplete sampling of services in R&D surveys may lead to some underestimation of their R&D activity, but this is unlikely to account for their apparently poor performance. This paper draws on an analysis of existing statistical sources, and on interviews and workshops with service firms' managers. It finds difficulties associated with the ways in which R&D has been operationalised in survey questions. Examination of survey questionnaires suggests that the formulation of these questions, focusing on technological R&D and ruling out much social scientific R&D, disproportionately reduces the reporting of R&D by service firms. But beyond this, the R&D concept itself has some problematic features where it comes to documenting innovation in service firms. This was investigated through a programme of interviews and workshops with service firms, where a lack of familiarity with the R&D concept and R&D management practices was found to be commonplace. R&D performance and innovation activities vary across services of different sorts, even though most service subsectors appear to be low R&D investors. It is thus important to examine services' innovation patterns and processes, to establish what types of R&D‐like activity are underway in these subsectors. While some modification in R&D measurement would be desirable to capture services' activities, effort to understand the non‐R&D elements of services innovation is also important – for management and for policy (given that governments are seeking to create R&D incentives and targets for services and other sectors). There are grounds for expecting (a) services' share of business R&D to continue to grow; (b) this share to continue to be well below what would be expected from the prevalence of services in economic activity, and (c) for many services' innovation to continue to rely heavily on sources that are not directly associated with R&D.     

Analytical Instrument R&D Management

Abstract . The paper describes briefly some of the problems faced in the management of R&D in the British Scientific Instrument Industry and an opportunity of re-organization following the merger of several small companies.
The reasons for a hybrid rather than a project orientated or functional organization are given, with special reference to economies of standardization and flexibility of resources resulting from size. The method of resource allocation and project control is outlined and some qualitative conclusions on the results of this approach are drawn.     

Managing innovative R&D teams

Successful R&D groups not only generate innovative ideas, but also transfers these newly created concepts through the organizational system for economic gain. While innovation is not a random process, managers often argue that R&D performance is hard to measure and even more difficult to manage. An exploratory field study into technology-oriented R&D environments determines the principle factors that influence innovation-based performance of R&D teams. The results identify specific barriers and drivers to innovative team performance and provide insight into the type of an organizational environment and managerial leadership that is conducive to innovative R&D team performance. The data further suggest that many of the performance variables have their locus outside the R&D organization. Yet, managerial leadership style, both at the R&D team level and at senior management, has significant impact on creativity that ultimately affects R&D performance.     

The allocation of R&D resource

Abstract
The allocation of R&D resource in a multi-business organisation is often based more on current operating performance than on the relative potential for technological development of the businesses. The approach suggested in this paper attempts to overcome these problems by linking R&D allocation very closely to business strategy. The two key concepts are technology leverage, i.e. the extent to which technology can change the business environment in an industry to yield competitive advantage, and business leverage i.e. the current competitive strength of an individual business within an industry. Where technology leverage is weak, competitive advantage will be mainly dependent on factors other than R&D and it is suggested that levels of R&D effort at or below 1 % of turnover are appropriate. Where technology leverage is strong, R&D can be effective in maintaining strong business leverage by achieving technology mastery or in transforming a weak business position by creating a technological discontinuity. R&D intensities ranging from 3 to 15 or more % of turnover are thought to be appropriate in these cases. This framework can be used for policy debates on R&D allocation, for example whether the R&D allocation is appropriate for the business strategy or whether R&D could spearhead a more expansionist business strategy. The framework has been successfully used in ICI Chemicals and Polymers Limited during the annual R&D budget process.     

Mapping the invisible colleges of R&D Management

R&D Management has consistently been considered one of the top technology and innovation management journals since its inaugural issue in 1970. The purpose of this paper is to use bibliometric techniques to examine R&D Management in four time periods, 1986–1990, 1991–1995, 1996–2000, and 2001–2005 in order to reveal changes in its intellectual base. Bibliometric research has illuminated the knowledge domains of several technology and innovation management journals including R&D Management Linton and Thongpapanl, but there has not previously been a comprehensive detailed analysis focused only on R&D Management . Using co-citation analysis, this paper identifies the invisible colleges (research networks) associated with publications in R&D Management . The results indicate that Cohen and Levinthal's absorptive capacity model dominates the final two periods. The conclusions suggest how the absorptive capacity model might be more effectively utilized in future R&D Management research.