广义空间调制系统的正则化OMP检测算法

在广义空间调制（GSM）系统中,最大似然（ML）检测可以取得最优的检测性能,然而其计算复杂度随激活天线数的增加急剧增长。针对这一问题,提出了一种基于稀疏重构理论的低复杂度检测算法——正则化正交匹配追踪（ROMP）算法。该算法首先根据信道矩阵和当前残差的内积选取多个候选激活天线索引,接着对候选天线索引按正则化标准进行可靠性验证,剔除错误索引,缩小信号的搜索空间,最后通过求解最小二乘问题估计信号。仿真结果表明,与经典的正交匹配追踪（OMP）算法相比,所提算法以少许复杂度的增加为代价极大提升了检测性能,能够在检测性能与复杂度之间取得更好的折中。     

采用相位判决的低复杂度广义空间调制检测算法

针对广义空间调制（GSM）系统中信号检测复杂度过高的问题,提出了一种基于相位判决的低复杂度检测算法。首先根据一种排序准则对天线组合进行排序,然后将排序后的天线组合中的符号向量依次通过基于相位判决的迫零(ZF)均衡器进行检测,最终得到星座调制符号和激活天线组合。分析和仿真结果表明,该检测算法可以有效缩小接收端的搜索范围,在提供与最大似然（ML）检测算法相近的误比特率（BER）性能的同时,计算复杂度降低了98%。     

采用改进ML-OSIC的MIMO联合检测

在垂直分层空时码（V-BLAST）多输入多输出（ MIMO）系统中,最大似然检测算法（MLD）可以获得最佳的差错概率性能,但是其算法复杂度随着天线数目及其搜索空间数目呈指数增长;排序连续干扰消除（OSIC）算法具有高可行性的优点,但是其误码率由于无法防止误码扩散的原因而下降。基于OSIC算法复杂度主要来源于矩阵求逆运算,提出了一种改进的OSIC算法,该算法采用并行检测与精确检测值相结合的方案,在维持相对满意性能的情况下,减少算法复杂度。考虑到传统OSIC算法的误码扩散,将改进的OSIC算法与ML算法相结合,利用ML的穷尽搜索方式来提高算法的整体性能。为了避免ML算法给系统复杂度带来负担,通过一定的复杂度公式优先选出b层进行改进的OSIC算法,剩余的误差累积层使用MLD执行。仿真结果表明,所提算法复杂度小于传统OSIC算法,同时得到了接近ML算法的性能。     

一种空频二维键移索引调制传输新方法

多输入多输出(Multiple-Input Multiple-Output,MIMO)技术和正交频分复用(Orthogonal Frequency-Division Multiplexing,OFDM)技术因其优秀的抗符号间干扰特性被广泛应用于高速数据传输,但传统MIMO-OFDM系统的检测需要在空频域中联合搜索调幅/调相信号,复杂度高。为降低系统复杂度,将索引调制技术与MIMO-OFDM系统相结合提出了一种激活特定空频单元,利用索引传输额外信息的新方法,并通过理论分析获得了该方法的近似闭合性能表达式。此外,利用数值仿真对分析结果进行了验证。理论推导与系统仿真结果均显示了所提方法能在不增加发射天线数目的前提下提高系统的发射分集增益。上述理论结果可以为下一代低功耗低复杂度的空频系统设计提供借鉴。     

一种改进的GMSK相干解调方法

利用Laurent分解方法可以将GMSK（Gaussian Filtered Minimum Shift Keying）信号表示成一系列脉冲幅度调制（Pulse Amplitude Modulation,PAM）信号之和的特性,对基于Laurent分解的GMSK信号次优化相干检测技术进行改进,多加入了一个PAM波形,调整了维特比检测分支度量的计算方法,并在不同相位关联长度下仿真分析了GMSK信号最优化、次优化和改进相干检测算法的误码率性能及实现复杂度。结果表明,与次优化检测算法相比,所提算法在不明显增加解调模块复杂度的情况下提高了解调误码性能。     

MIMO系统中基于信号可靠性判定的OSIC检测

排序串行干扰消除（Ordered Successive Interference Cancellation，OSIC）是多输入多输出无线通信系统中一种重要的信号检测技术。为了降低该算法的计算复杂度，首先提出了基于信号可靠性判决的排序串行干扰消除算法，根据所设计的信号可靠性判决（Signal Reliability Decision，SRD）结构的判决结果选择不同的方法消除信号间的干扰。为了进一步提升SRD-OSIC算法的检测性能，提出了局部最优（Local Optimized,LO）的LO-SRD-OSIC算法。仿真结果表明，SRD-OSIC算法仅需要传统OSIC算法一半的复杂度就能获得相近的误码率性能。不仅如此，当LO-SRD-OSIC算法与SRD-OSIC算法的计算复杂度相同时,LO-SRD-OSIC算法可以获得额外3 dB的误码率性能增益。     

二进制猫群算法在大规模MIMO天线选择中的应用

在多输入多输出（MIMO）系统中,天线选择技术平衡了系统的性能和硬件开销,但大规模MIMO系统收发端天线选择复杂度问题一直没有得到很好的解决。基于信道容量最大化的准则,采用两个二进制编码字符串分别表示发射端和接收端天线被选择的状态,提出将二进制猫群算法（BCSO）应用于多天线选择中,以MIMO系统信道容量公式作为猫群的适应度函数,将收发端天线选择问题转化为猫群的位置寻优过程。建立了基于BCSO的天线选择模型,给出了算法的实现步骤。仿真结果表明所提算法较之于基于矩阵简化的方法、粒子优化算法具有更好的收敛性和较低的计算复杂度,选择后的系统信道容量接近于最优算法,非常适用于联合收发端天线选择的大规模MIMO 系统中。     

模平方优化的低复杂度多符号检测

针对传统多符号检测算法（MSD）在脉冲编码调制/调频（PCM/FM）信号解调时存在复杂度高、工程实现难度较大的问题，提出了一种优化模平方的低复杂度多符号检测算法。通过将传统MSD中的模平方运算近似优化为绝对值加减法运算，使用的计算资源下降为原来的80〖WT《Times New Roman》〗%〖WTBZ〗左右。仿真结果表明，与传统的MSD算法相比，该优化算法降低了计算资源，同时几乎不损失性能，有利于硬件的实现，具有较强的实用价值。     

大规模MIMO系统中的一种自适应SIC检测算法

与传统系统相比,大规模多入多出（MIMO）系统能更加有效地提高频谱效率。利用传统的最小均方误差（MMSE）信号检测算法求解大规模MIMO系统,虽然检测结果接近最优,但是矩阵的求逆运算导致计算的复杂度非常高。提出了一种自适应排序干扰消除（SIC）检测算法,在逐次超松弛（SOR）迭代运算的基础上,通过干扰消除降低待检测矩阵的维度。通过仿真分析,得出所提算法的复杂度低于Jacobi、SOR检测算法,且在迭代次数较少的情况下,算法的误码率（BER）性能明显优于SOR检测算法。     

用于SFBC MIMO-OFDM系统的改进SLM算法

在空频编码（SFBC）多输入多输出正交频分复用（MIMO-OFDM）系统中传输符号存在较高峰均功率比（PAPR）问题,采用SLM算法能够有效降低系统峰均功率比,但随着发射天线数的增加,较多的快速傅里叶反变换（IFFT）会增加系统的计算复杂度,因此,构造F矩阵并提出了一种基于F矩阵SFBC MIMO-OFDM系统的改进SLM算法。采用F矩阵作为相位序列组对空频编码信号进行独立处理,获得最优相位序列取共轭,将共轭序列中每两个旋转因子为一个单位交换位置,并扰码SFBC后各天线的信号,以此减少了每根发射天线上的IFFT次数。理论和MATLAB仿真分析表明,该算法获得了良好的峰均比性能,同时也降低了系统的计算复杂度。     

Brown＇s Blossom in Britain-China

The overall strategic relationship between U.K. and China is ＂better than ever＂, China- Britain relations have maintained good momentum, with increased high-level exchanges and the reinforcement of strategic mutual trust, with more room for growth in the future.     

Challenge and Opportunity Go Hand in Hand——What Global Economic Agitation Brings to the China's Economy?

Domino effects of the global finance agitation As the origin of the subprime crisis,US financial institutions lost USS45 billion last year,accounted for over half of the total US,EU & Japan loss.Since January 15th,Chtigroup released its financial statement of the 4th quarter,showing a net deficit of USS9.83 billion,which marked the hisoric high of its quarterly deficit.     

Sinosteel：Extraordinary Moves in Industry Chess

Among the Fortune 500 firms,more and more images from China emerge out.On the 2008 list,Sinosteel Corporation,a landmark group of China industries quietly squeezes into the candidate line.As the largest steel service ＆ trade enterprise,its sales reached at RMB 111.24 billion,with a year-on-year increase of 83.03 percent,and the profit grew by 180.03 percent.On the Sinosteel 2008 Work Meeting,the president Huang Tianwen uttered,＂In the coming year,we will work for US$20 billion sales,and look forward to getting a position in Fortune 500 firms for ourselves.＂     

Walk Through Unusual Five Years—— An Exhibitor＇s Canton Fair Course

When the 103rd Canton Fair is approaching, an old friend of Canton Fair, Li Ying from Jiangsu prov-ince recollected his past five years＇ experiences to the grand trade meeting. Each year is special, with some unforgettable memories colored by the year.     

Jean-Pierre Duprieu： Willing to Be A Legate of Sino-French Business

Estaing, former French president, Valery Giscard d＇Estaing attended Sino-French Economic Seminar held in Shanghai in early April and said that the world center has shifted from the west to the east with many European and US companies entering into Asia, and China has the ability to play an important role in the world stage. Estaing, naming himself＂French Confucian＂, then said in Chinese that a cook-group includes 10 people in ancient Chinese soldier system and the cook is in charge of cooking for them. And people who belong to the same cook are actually ＂Partners＂.     

China''''s Stock Market Wave

The annual meeting of the World Economy Forum was held in Davos,a little town in Switzerland,on January 23rd to the 27th this year,with the theme"the Power fo Collaborative Innovation",over 2500 celebrates from ture political and cconomic circles of more than 80 countries and challengred logether to talk about the future of the global economy in 2008,A Forum for the problems and challenges that face whole world,some of the keywords which drew attention during the event were:the U.S.subprime mortgage crisis,soaring energy prices,the economic slowdown in the U.S.ermerging economic bodies,authority funds and the general unpredictable nature of the global economy.     

Trade Promotion from Neighborhood

If you are considering to trade with companies in Japan or expanding your .business to Japan, we are ready to help from the very beginning.＂ You will find this greeting at the first sight on the Chinese website of Japan External Trade Organization （JETRO）. JETRO has committed itself in delivering highly efficient and quality services to meet the demand of internal and external customs including Japanese companies, hence winning a good reputation in the international trade arena. In recent years, with its priority in advancing business cooperation in South and East Asia, JETRO has made great achievement in promoting trade between China and Japan. Therefore, China＇s Foreign Trade interviewed Mr. Yoichi Maine, Deputy Director General of JETRO BEIJING.     

Auto Parts Market Potential Coming into Surface

Looking at the increasingly fierce competition in the world auto market. global automobile manufacturing industry, taking Europe, the U.S. and Japan as representatives, is gradually forming a new type of relationship, mutual cooperation between whole vehicle and parts manufacturers. We can clearly see that auto parts manufacturers have become independent from the whole vehicle manufacturing companies, which means that the former structure of auto industry has greatly changed, and a new relationship,     

Public Financial Expenditure——A Reflection of the Livelihood Improvement

In recent years.China's public finance put social construction high on the agenda and attaches more importance on livelihood insurance and improvement.The 2003-2007 public financial expenditure reflects a fact that the government isputting more emphasis on livelihood andissues concerning the people.     

Voices from the MPC and CPPCC

"Crucial for economic growth.energy utilization has its role in all economic sectors and every aspect of people's daily life.Now we are in dire need of a new profession,namely energy manager.We not only need to have passion and responsibility,but also a scientific approach to conserve energy and cut emissions.APpropriate legislation should be in place.and a special profession should be introduced to ensure the implementation of these laws and regulations."