The impact of service innovation on firm-level financial performance

This article empirically investigates if firms focusing on service innovation perform better financially than firms not focusing on service innovation. Analysis of the financial performance of 3575 Norwegian firms in the manufacturing industries supports the proposition that firms focusing on service innovation have significantly higher growth of operating results than firms not focusing on service innovation. However, this proposition is not supported in a corresponding analysis of 1132 Norwegian firms in the service industries. We elaborate on these results by investigating a variety of performance measures and by comparing the effects of service innovation between manufacturing and service industries. The article contributes to the service innovation measurement literature and to a better general understanding of the determinants of service innovation performance effects.     

Determinants of proactive innovative behaviour in new services: empirical investigation of service versus manufacturing firms

The research performs a complete analysis of the differences between services and products based on factors associated with the innovation process. The research analyses the factors/dimensions and their repercussions that determine firms' capacity to adapt to their environment and observes how the critical dimensions of the innovation process influence the gap generated by the difference in the firm's current level of innovation and the level developed by the competition. The results show that the client's participation in the process of innovation is greater in service firms that possess a larger innovation gap and are more proactive. The opposite is the case for formalization and decentralization, which occur in lower levels in this kind of firm. Further, decentralization and formalization are lower in service than in manufacturing firms.     

The Internationalization of Service Firms in China: A Comparative Analysis with Manufacturing Firms

In this article, we expand upon the springboard perspective of emerging markets in the service sector. We investigate the phenomenon of service firm internationalization in China and the distinct differences between service and manufacturing firms during international expansion. Using dynamic analysis of historical data for 363 service firms and 569 manufacturing firms from 2001 to 2007, we find that the internationalization of service firms in China is different from that of manufacturing firms in terms of resource requirement and experience exploitation. The internationalization of service firms relies more on international experience than corporate resources. Furthermore, we also identify the structural differences between hard and soft service industries. In China, identifiable intangible assets are found to be more important for the international expansion of hard service firms than they are for soft service firms. © 2013 Wiley Periodicals, Inc.     

Uncertainty and Information Search Activities: A Study of Owner–Managers of Small High-Technology Manufacturing Firms

This study examines the relationship among perceived strategic uncertainty (PSU), environmental scanning, and the information sources used by owner–managers of a sample of 153 small high-technology manufacturing firms. The results suggest that increased scanning activities are associated with high levels of PSU. Perhaps most importantly, the results also suggest that owner–managers of younger firms respond to uncertainty differently than their counterparts in more mature firms. Specifically, owner–managers of younger firms appear to respond to higher PSU by relying more heavily on personal and external information sources. Owner–managers of older firms, on the other hand, rely more heavily on internal and impersonal information sources to address environmental uncertainty.     

Clustering,MNEs, and Innovation: Who Benefits and How?

Abstract

This paper explores three under-researched questions in the literature on multinational enterprises (MNEs), clustering, and innovation. First, to what extent does multinationality lead to higher rates of innovation activity and performance? Second, what, if any, is the link between MNE cluster location and innovation inputs and outputs? Third, are there any significant differences between enterprises belonging to domestic and overseas MNEs in these regards? Evidence is based primarily on 11,775 firms derived from the UK Community Innovation Survey 2007. Diversity in the regional economy exerts the most consistent positive influence, followed by the scale of employment in the enterprise’s own industry. Enterprises belonging to domestic MNEs appear to exert higher levels of innovation effort. However, evidence regarding their superiority in innovation outputs was weaker. Contrary to Michael Porter’s work, it appears that enterprises belonging to overseas firms benefit more than domestic firms.     

Innovation patterns and their effects on firm performance

This study aims to identify various innovation patterns and understand their effects on firm performance across business service sectors. By collecting empirical data from 198 Korean business services firms, we explore these firms’ major innovation patterns, conceptualized as combinations of different service innovation dimensions: service concept, service delivery, customer interaction, and technology. Then, in accordance with the innovation patterns they display, we group these firms into four clusters: ‘service delivery-based high-technology', ‘service delivery and customer interaction-integrated', ‘customer interaction-based high-technology', and ‘strongly balanced’ innovators. Last, we investigate whether these patterns influence firm performance. Our findings are three-fold: (1) the innovation patterns in business service firms result from the creation of new combinations of major service innovation dimensions, (2) four independent innovation patterns emerge in business service firms, and (3) these patterns lead to different levels of firm performance. Practically, our findings highlight the importance of highly qualified employees, customer interaction, and technology in improving financial performance.     

A comparative study of innovation behaviour in Singapore's KIBS and manufacturing firms

While most services innovation studies are concentrated on the OECD or EU countries, research on services innovation in the non-OECD context is still rare. This study investigates innovation behaviour of a certain group of services – knowledge-intensive business services (KIBS), compared with the manufacturing sector in Singapore. The main findings of this study are: (1) KIBS firms have higher innovating ratio than manufacturing firms, but innovating manufacturing firms are more likely to do R&D than innovating KIBS firms; (2) KIBS firms have higher human capital intensity, training spending intensity, innovation spending intensity, and R&D spending intensity than manufacturing firms; (3) KIBS firms and manufacturing firms have similar innovation objectives, although some delicate nuances do exist; (4) KIBS firms are less likely to have overseas partners for innovation collaboration than manufacturing firms; (5) there is a U pattern of innovation collaboration with geographic distance for both KIBS and manufacturing firms; (6) social capitals are important for KIBS firms' successful provision of innovation support to manufacturing clients; (7) the importance of spatial proximity varies over different phases of innovation support.     

R&D,Human Capital and Export Behavior of Manufacturing and Service Firms in Ghana

ABSTRACT

The paper carries out a detailed analysis of the effects of R&D and human capital as well as their interactions with innovation on export behavior of manufacturing and service firms in Ghana using a dataset of 720 firms that merges the Enterprise, Innovative Capability and the Innovation Follow-up Surveys respectively for Ghana. Using a bivariate probit regression, the results show that R&D and human capital (employees’ education, slack time and formal training) are positive and significantly related to the propensity for firms to export in Ghana. The cross derivatives (differences) for the interaction terms (R&D and innovation, and education and innovation) also showed that these interaction terms have positive effects on the likelihood for firms to export but are significant only for a negligibly small fraction of the sample. Thus, there is no much statistically significant evidence in support of the mediation role of innovation in the relationship between R&D/education and the export behavior.     

Internationalization capabilities of SMEs: A comparative study of the manufacturing and industrial service sectors

Nowadays, the global economy requires developed countries to undergo industrial restructuring. In this context, industrial small- and medium-sized enterprises (SMEs) need to collaborate with the service sector to enhance their competitiveness and strategic capabilities. Indeed, industrial service SMEs have been the object of particular attention from governments since these enterprises have become a key element for manufacturing and innovation networks in developed countries. However, these firms, as well as the manufacturing SMEs they serve, now face the challenge to internationalize. This paper addresses the of the strategic capabilities required by SMEs in general, and manufacturing and industrial service SMEs in particular, to internationalize, as well as the effect of these capabilities on their export performance. These strategic capabilities are presented in a research model, which relates human resources (HR), product development capabilities and market development capabilities to export performance. In testing this model with a sample of 347 Canadian and French SMEs, similarities and differences between the two types of SMEs are highlighted.     

How Does Probability of Innovation Change with Firm Age?

This paper looks at the probability of introducing innovations by manufacturing firms at different stages of their lives. Once differences related to activity and size are controlled for, we examine how the probability of innovation varies over entry, post-entry ages, and advanced ages of mature firms. We also measure the association between exit from the market and pre-exit innovation. Results show that the probability of innovating widely varies by activity, and that small size per se broadly reduces the probability of innovation, but also that entrant firms tend to present the highest probability of innovation while the oldest firms tend to show lower innovative probabilities. Some sets of firms with intermediate ages also present a high probability of innovation, and exiting firms are clearly associated to lower levels of introducing process innovations.     

Innovation in services – how different from manufacturing?

Using standardised firm data a comparative analysis of the determinants of product and process innovation in manufacturing and services is performed. Results show that in services there are significant differences in innovation behaviour, in terms of intramural and extramural R&D. It is also found that size matters less in services than in manufacturing. Although youth has a positive effect in both cases, young service firms are more likely than young manufacturing of being pioneer innovators. The results reveal the importance of learning by doing in service process innovations, as young service firms are less likely to introduce process innovations.     

Firm Size and Innovation in European Manufacturing

The paper investigates the differences between small, medium-sized and large firms regarding their performance in the introduction of new products and processes. After a review of the relevant literature, two models are proposed and tested in search for different business strategies and innovation inputs connected to product and process innovations. The empirical analysis uses innovation survey (CIS 2) data at the industry level for 22 manufacturing sectors, broken down in three firm size classes, for eight European countries. Special attention is devoted to tackling the issues of possible endogeneity of the regressors and of unobserved sectoral heterogeneity. The results – strengthening the findings of previous studies – show that product and process innovations, though having some complementarities, are associated to different innovative inputs and strategies pursued by firms. Systematic differences also emerge between the behaviour of large firms and SMEs.      

Networks,Firm Size and Innovation

Using survey data on Australian firms this paper investigates the determinants of innovation. Various possible determinants are investigated, including market structure, export status, the use of networks, and training. Regression analysis is conducted separately for manufacturing and non-manufacturing firms and, within each sector, by firm size categories. The results include evidence of persistence in innovative activities and that the use of networks is associated with innovation in some sector-firm size categories. Specifically, small manufacturing firms exhibit a positive association between networking and innovation. In contrast, for non-manufacturing firms this association is present for medium and large sized firms.     

Export Performance: Is It Possible through Knowledge and Capabilities? Evidence from Turkish Manufacturing Firms

Purpose: This article measures to what extent export performance is affected by certain resource-based view (RBV) elements and seeks to elucidate relationships between these elements. Design: Among those RBV elements, knowledge and experience as resources, and marketing, production, product development, logistics, and service differentiation as capabilities, are chosen to be the basis of this research. Their effects on export performance are measured with a survey applied to personnel of Turkish manufacturing firms operating in Istanbul district. Findings: The results show us that marketing planning capabilities and service differentiation capabilities have a significant effect on export performance. The overwhelming effect of knowledge and experience of firms on marketing planning capabilities is one of the intriguing findings. Notwithstanding that, we found no trace of a relationship between product development capabilities and service differentiation capabilities. Value: This research provides several managerial and academic implications by contributing to a resource-based view in terms of knowledge and capabilities. Additionally, in this study, it is underlined that collective knowledge is vital for achieving high export performance.     

Identifying key determinants for new product introductions and firm performance in small service firms

Small firms have gained increasing attention in the innovation literature. Focusing mainly on manufacturing based literature we identified several key factors that contribute to the innovative potential of small firms. However, we do not know if these factors are recognised and used in small service firms. Distinguishing various types of service industries, our goal with this paper is threefold. First, we describe to what extent service firms use the key factors to their advantage. Second, we try to establish if there is a relation between the key factors and new product introductions. Third, we want to see if new product introductions indeed contribute to firm performance. After a survey among 502 Dutch service firms, we reveal some major differences between various types of service industries.     

Separate or Integrate? Assessing the Impact of Separation Between Product and Service Business on Service Performance in Product Manufacturing Firms

Purpose: Investigating how the separation of the product and service business mediates the effect of management's commitment to the service strategy on service performance in product manufacturing firms.

Methodology: The authors surveyed 216 European manufacturers in the high-value durable equipment industry moving into the service business. After assessing adequacy of measurement scales, the authors tested statistically for mediation. Their results hold when replicating the study using a structural equation modeling approach and while testing for common method biases.

Findings: The authors find evidence that the creation of a separate service organization, organized as a profit center, has a significant positive mediating effect between managerial commitment and the services' financial performance. Although separation also has a positive mediating effect between commitment and non-financial performance, organizing services as a profit center had a negative effect on the service's non-financial indicators.

Research Limitations: Research limitations include (a) a sample limited to German-speaking firms in the high-value durable equipment industry, (b) measurements based on self-reported managerial perceptions of service performance, and (c) conceptualization of service as a single strategic response.

Practical Implications: Although the complementarity between products and services is high in the market, the authors' research suggests few synergies to leverage their integration inside the organization. Accordingly, management should, at least in transition efforts similar to the ones included in this sample, look into creating a separate and distinct service organization.

Value/Contribution: This research was driven by practical concern on how to organize service operations in a manufacturing firm. Initial framing of the research through the creation of the construct of separation of product and service business was used.     

Knowledge,innovation and firm performance in high- and low-technology regimes

Industries with greater aggregate levels of research and development (R&D) intensity are home to higher rates of firm-level innovation, according to survey data from 845 Canadian manufacturing firms. And, though innovation is more common when industry dynamism is high, innovative firms are likely to enjoy revenue growth, irrespective of the industry in which they operate. The research also shows that firm knowledge, industry dynamism and innovation interact in the way they influence firm performance. A highly skilled workforce is most beneficial to firm performance in dynamic environments, while firms in stable manufacturing industries benefit more from investments in training.     

Measuring Corporate Performance by Building on the Stakeholders Model of Business Ethics

The main thesis guiding the conceptual development of our corporate performance measurement model is that business success – defined as long-term survival and growth – is determined by relationship quality (1) among the various organizational departments (internal stakeholders), (2) between internal and external stakeholders, and (3) between internal and distal stakeholders. Relationship quality among internal stakeholders is conceptualized and operationalized in terms of internal service quality. Relationship quality between internal and external stakeholders is conceptualized and operationalized in terms of external service quality. Relationship quality between internal and distal stakeholders is conceptualized and operationalized in terms of company goodwill. Thus, corporate performance of manufacturing firms can be measured by a survey of representatives of internal, external, and distal stakeholders. Corporate strategies can be developed as a direct function of strengths and weaknesses uncovered by corporate performance measurement.     

The influence of political risk on the scope of internationalization of regulated companies: Insights from a Spanish sample

Political risk not only constitutes a threat for multinational enterprises but can also be a source of opportunities. Exposure to and accumulated experience dealing with political risk allows firms to better implement a wide set of political actions such as negotiation of entry conditions, lobbying, litigation, campaign contributions and coalition formation, leading to preferential conditions, reduced environmental uncertainty, reduced transaction costs and increased long-term sustainability to the firm. These advantages facilitate investments in countries with higher and more diverse levels of risk and make political risk to be positively associated with the firm's scope of internationalization. This effect is not homogeneous across firms. Drawing from a sample of 164 Spanish companies with investments in 119 countries, we find that the impact is greater for companies in industrial sectors that are the object of greater governmental regulation than it is for firms in non-regulated manufacturing or service sectors, with less frequent interactions with home and host-country institutions.     

What determines firms’ intention to postpone product differentiation?

Abstract

In present-day Japan, more firms are beginning to apply postponed product differentiation in favor of providing mass-customized products. Mass customization can lead to competitive advantages in satisfying consumers’ individual needs. We propose a causal model to describe why and how Japanese distributors decide to postpone product differentiation and supply mass-customized products. The model was empirically tested by structural equation modeling with a dataset from Japanese automobile dealers, who have employed highly advanced mass customization systems and are world leaders in this practice. The results show that two environmental factors, uncertainty and innovation, affect firms’ expectations of their customers’ intentions to purchase mass-customized products and, in turn, firms’ decisions regarding postponing product differentiation in favor of mass customization. Mass customization has a high potential for growth in the future due to increasing levels of uncertainty and evolving forms of innovation.