Identifying the gaps of fourth year degree pre-service teachers’ pedagogical content knowledge in teaching engineering graphics and design

Engineering Graphics and Design is a technological subject which is offered in the Bachelor of Education degree from third to fourth year of the degree course. Fourth year pre-service teachers find EGD difficult to teach because of various reasons. Therefore the aim of the paper was to investigate fourth year pre-service teachers’ pedagogical content knowledge gaps in teaching EGD during their teaching practice. The study was conducted using a qualitative approach and eight pre-service teachers were purposefully selected to take part in the study. Findings of the paper found that pre-service teachers found teaching practice very short to do all the teaching tasks that is required of them. Some pre-service teachers did not have drawing models to make learning concrete to their learners. Assessment was done partially just to impress the university tutors and to conform to the schools’ rule and not to evaluate the learners’ understandings and their teaching.     

Experienced technology teachers’ teaching practices

International Journal of Technology and Design Education - Teachers’ teaching practice plays a key role in the learning process of pupils, and for teaching to be successful, teachers must...     

Exploring pre-service teachers’ technology-integration belief and scientific inquiry in a teacher-development course

International Journal of Technology and Design Education - We implemented design practices for a total of 85 pre-service teachers in a teacher-development course. This mixed-method study explored...     

Middle-school teachers’ understanding and teaching of the engineering design process: a look at subject matter and pedagogical content knowledge

This paper reports on research investigating six middle school teachers without engineering degrees as they taught an engineering unit on the engineering design process. Videotaped classroom sessions and teacher interviews were analyzed to understand the subject matter and pedagogical content knowledge the teachers used and developed as they introduced the eight steps of the engineering design process (from content standards for the state of Massachusetts, USA). The teachers demonstrated wide-ranging knowledge of the engineering design process, and this paper describes two of the steps the teachers showed a more sophisticated understanding—constructing a prototype and redesigning. Examples from the teachers illustrate strengths that can be built upon as well as some areas for further development.     

Enhancing teachers’ technological pedagogical knowledge and practices: a professional development model for technology teachers in Malawi

This paper reports on a professional development that was designed and implemented in an attempt to broaden teachers’ knowledge of the nature of technology and also enhance their technological pedagogical practices. The professional development was organised in four phases with each phase providing themes for reflection and teacher learning in subsequent phases. On-going support, reflection and feedback underpinned the professional development processes to enhance teachers’ prospects of putting aside old traditions and culture to implement new practices in their classrooms. The teachers collaboratively explored new concepts through readings of selected scholarly papers, making presentations of their views generated from the readings and engaging with peers in discussing learning, curriculum issues and concepts related to the nature of technology and technology education. A qualitative analysis of the teachers’ journey through the phases of the professional development showed the teachers’ enhanced knowledge of technology and technology education. However, their classroom practices showed technological pedagogical techniques that reflected their traditional strategies for teaching technical subjects. It is argued that although the teachers’ conceptualisation of learning in technology was still fragile at this point, attempts to shift teachers’ beliefs and practices require deep theoretical grounding and transferring that into technological practices. A professional development built on existing ideas and context helps expand the teachers’ views about the nature of technology and technology education.     

Exploring the relationship between in-service teachers’ beliefs and technology adoption in Brazilian primary schools

International Journal of Technology and Design Education - The paper analyses possible reasons for the gap between teachers’ actions and intentions, reported by research on practices with the...     

How school context and personal factors relate to teachers’ attitudes toward teaching integrated STEM

Integrated Science, Technology, Engineering and Mathematics (STEM) education is an emerging approach to improve students’ achievement and interest in STEM disciplines. However, the implementation of integrated STEM education depends strongly on teachers’ competence, which entails, among others, teachers’ attitudes. Nonetheless, not much is known about the factors that influence teachers’ attitudes toward teaching integrated STEM. Therefore this paper uses a survey method to get insight into the relationship between three groups of variables and teachers’ attitudes toward teaching integrated STEM: teacher background characteristics, personal attitudes and school context variables. The results of the multiple regression analyses reveal three variables that are positively linked with teachers’ attitudes: professional development, personal relevance of science and social context. Moreover two variables show a negative correlation: having more than 20 years of teaching experience and experience in mathematics. The results of this study provide valuable information about factors related to teachers’ attitudes toward teaching integrated STEM. Moreover, these results can be deployed by school administrators to guide them when implementing integrated STEM education in their school.     

Criteria for continuing professional development of technology teachers’ professional knowledge: a theoretical perspective

Continuing professional teacher development (CPTD) is generally accepted as an indispensable tool for the professional development of technology teachers. The current theoretical framework for CPTD comprises a variety of models. However, criteria underpinning these models are not explicit. If, in turn, the criteria were explicit, it could serve as part of the pre-determined criteria for the evaluation of the quality of CPTD programmes. The quality of higher education is important to its stakeholders and the assurance thereof should be a continuous process. The aim of this article is to determine criteria for evaluating CPTD programmes through an analysis of CPTD models in different educational settings. The article takes the form of a literature study to determine which CPTD models exist and which aspects of such models are most suitable for facilitating development of technology teachers’ professional knowledge. A significant finding of this study is eight criteria for evaluating CPTD programmes.     

Two-stage hands-on technology activity to develop preservice teachers’ competency in applying science and mathematics concepts

This paper discusses the implementation of a two-stage hands-on technology learning activity, based on Dewey’s learning experience theory that is designed to enhance preservice teachers’ primary and secondary experiences in developing their competency to solve hands-on problems that apply science and mathematics concepts. The major conclusions were that: (1) preservice teachers understood the science and mathematics concepts related to the hands-on activity, but they need more help in exploring practical products of applying discipline related concepts for the purpose of stimulating their design ideas; and (2) the two-stage hands-on technology learning activity served as useful prompts in developing preservice teachers’ primary and secondary experiences in applying science and mathematics concepts during the design process. However, it was evident that preservice teachers still needed more training in improving their design ideas by the application of more in-depth related science and mathematics concepts.     

Students’ knowledge of emerging technology and sustainability through a design activity in technology education

International Journal of Technology and Design Education - The purpose of this study is to explore whether, and if so how, a design activity could encourage students to express and develop...     

Communities of practice as a tool for continuing professional development of technology teachers’ professional knowledge

With the introduction of a new school curriculum in South Africa in 1998, Technology as a school subject was introduced for the first time. Implementation by the National Department of Education took place over a very short time frame allowing very little time for adequate training of technology teachers by the provincial departments of education. Teachers were expected to implement technology in schools without being adequately trained. They needed to develop their professional knowledge which comprises school knowledge, subject knowledge and pedagogical knowledge. This could mainly be done through continuing professional teacher development (CPTD). To address the lack of CPTD opportunities and to develop these teachers’ professional knowledge, the Unit for Technology Education at a university in South Africa established a Community of Practice (CoP) as a strategy to develop teachers’ professional knowledge in Civil Technology. However, after a number of CoP workshops, and although these CoPs have been designed to serve as a tool for CPTD, we do not know to what extent it succeeds in developing teachers’ professional knowledge. The purpose of this article is to determine to what extent the CoP succeeded in developing teachers’ professional knowledge. A qualitative study was conducted. Data were collected through the observation of the teachers during the CoPs, open-ended questionnaires and field notes taken during workshop discussions. The main findings were that the teachers gained discipline knowledge and acquired instructional methodology (pedagogy) from which learners may benefit. The presentation and organisation of the CoP influenced the learning of the teachers.     

Implementing programming in school mathematics and technology: teachers’ intrinsic and extrinsic challenges

International Journal of Technology and Design Education - The 2017 reform of the Swedish national curriculum requires that all compulsory school mathematics and technology teachers integrate...     

Researchers’ willingness to engage in knowledge and technology transfer activities: an exploration of the underlying motivations

Increasingly, universities have become conscious of their important role as centres of knowledge generation and diffusion. Accordingly, they have put in place policies, methods and resources to increase knowledge and technology transfer (KTT) activities. However, succeeding in this endeavour is not that easy. An active involvement of researchers is fundamental. Literature examining researchers’ attitude towards KTT activities is limited, offering a partial view on the subject. This study aims at bringing new light to this issue. First, we identify those factors that influence researchers’ willingness to engage in KTT activities. From a comprehensive literature review, we distinguish between intrinsic motivations, extrinsic motivations and university support and services as critical elements. A scale is developed and validated. Second, the scale is applied to the case of R&D contracts. The sample consists of 249 researchers from one of the biggest Spanish universities. Results suggest that the proposed scale has a good fit, indicating that it can be considered as a good instrument for measuring researchers’ willingness to get involved in KTT activities. Policy implications and directions for future research are provided.     

Teaching digital models: secondary technology teachers’ experiences

International Journal of Technology and Design Education - In secondary technology education, models of artifacts, systems and processes, visualized and simulated through digital tools (digital...     

Assessing changes in teachers’ attitudes toward interdisciplinary STEM teaching

Integrating engineering and technology concepts into K-12 science and math curricula through engineering design project-based learning has been found to increase students’ interest in science, technology, engineering, and mathematics (STEM), however preparing teachers to shift to interdisciplinary teaching remains a significant challenge. Primarily teachers need to develop both skills and attitudes toward interdisciplinary teaching. In doing so, professional development (PD) is considered a key component in helping teachers through this transformation process. In an educational environment of accountability, measuring the effects of PD programs on teacher behaviors and capacity is essential but often elusive. The current study describes the change in attitudes to interdisciplinary teaching of 29 self-selected middle and high school teachers who participated a PD workshop and in delivering a 12–15 week interdisciplinary teaching and design problem unit that spanned multiple STEM subjects. This quasi-experimental pilot study implemented a single group pretest–posttest design using survey methods to collect data from the participants at two intervals; at the time of the PD workshop and at the completion of the teaching unit that emphasized a long-term engineering design problem. The goals of this research are to (1) assess the changes in attitudes to interdisciplinary teaching, attitudes to teamwork, teaching satisfaction, and resistance to change, (2) explore relationships among these changes, (3) and describe the variation in these changes across teachers’ gender, school level, discipline taught, and education level.     

Age and gender differences between pupils’ preferences in teaching general and compulsory technology education in Croatia

International Journal of Technology and Design Education - Today’s dynamic change of the pupils’ technological environment certainly affects their preferences towards technology, which...     

Developing pre-service primary teachers’ understanding of engineering through engineering habits of mind and engagement with engineers

International Journal of Technology and Design Education - This paper explores how primary teachers might be prepared through their pre-service training to feel more confident to include...     

Epistemic habits: primary school teachers’ development of pedagogical content knowledge (PCK) in a design-based research project

Generalist primary school teachers often have little or no training in school subjects such as science and technology. Not surprisingly, several studies show that they often experience difficulties when teaching these subjects, in fact some primary teachers even avoid teaching them. The over all aim of this study is to contribute to new theoretical and methodological tools for the study of how teachers develop knowledge for teaching, i.e. pedagogical content knowledge (PCK). And based on this, elaborate on implications for the professional development of primary school teachers. The teachers in the study participated in a design-based research project concerning technology education in Grade 1. We were especially interested in whether the teachers displayed any habits that contributed to the development of their personal PCK. We found three significant patterns in how the teachers, together with the researcher, developed knowledge of how to teach a specific topic in technology. We argue that these patterns tell us something about the teachers’ epistemic habits in relation to the teaching of technology. The existence of these habits could help to explain how teachers with little or no experience of teaching a subject can develop relevant PCK.