A theoretical model of the relationship between value added elements and end product

This paper focuses on the development of a theoretical scheme describing the transformation of primary incomes into end consumption and savings in the Russian economy. This scheme is basically a system of interrelated tables reflecting the distribution of primary incomes across the institutional sectors and their further reallocation and use. The scheme makes allowances for the specific features of the Russian economy and existing statistics. In terms of methodology, it is coordinated with the interindustry balance in current buyer prices and, from the theoretical standpoint, describes the connection between Quadrant II and Quadrant III of the balance. Therefore, the proposed system of tables is treated in the paper as Quadrant IV of the interindustry balance. The theoretical scheme is used by the authors as a necessary basis for constructing an empirical model of the relationship between value added and end product, which will be published in the next issue of this journal.     

Effect of sampling density on the measurement of stream condition indicators in two lowland Australian streams

There is widespread application of indicators to the assessment of environmental condition of streams. These indicators are intended for use by managers in making various comparative and absolute assessments and often have a role in resource allocation and performance assessment. Therefore, the problem of formally defining confidence in the results is important but difficult because the sampling strategies used are commonly based on a compromise between the requirements of statistical rigour and the pragmatic issues of access and resources. It is rare to see this compromise explicitly considered and consequently there is seldom quantification of the uncertainty that could affect the confidence a manager has in an indicator. In this paper, we present a method for quantitatively assessing the tradeoffs between sampling density and uncertainty in meeting various monitoring objectives. Assessments using judgement‐based representative reaches are shown to be unreliable; instead a sampling approach is recommended based on the random selection of measuring sites. A detailed dataset was collected along two streams in Victoria, Australia, and the effect of sampling density was assessed by subsampling from this dataset with precision related to the number of sites assessed per reach length and the intensity of the sampling at each site. The sampling scheme to achieve a given precision is shown to depend on the monitoring objective. In particular, three objectives were considered: (1) making a baseline assessment of current condition; (2) change detection; and (3) detection of a critical threshold in condition. Change detection is shown to be more demanding than assessing baseline condition with additional sampling effort required to achieve the same precision. Sampling to detect a critical threshold depends on nominating acceptable values of Type I and II error and the size of the effect to be detected. Copyright © 2006 John Wiley & Sons, Ltd.     

Fouling control in submerged membrane bioreactors.

The impact of fouling on the operation of submerged membrane bioreactors (MBRs) is discussed. The discussion proceeds through a review of the impacts of fouling and fouling speciation, with correlations of filterability against candidate foulants being provided. There follows a brief comparison of hydraulic performance of the submerged and sidestream configurations: data is presented to demonstrate the efficacy of coarse bubble aeration in the submerged MBR. The critical flux concept is then discussed and its applicability to MBRs deliberated in view of recent publications demonstrating fouling under sub-critical flux conditions. Finally, the two most commercially important MBR products are briefly reviewed with specific reference to design and operation for fouling amelioration.     

A case study of regional catchment water quality modelling to identify pollution control requirements.

There are four ecologically important river catchments that contain candidate Special Areas of Conservation (cSACs) under the Habitats Directive in the Lake District National Park located in the North of England. These are the rivers Ehen, Kent, Derwent and Eden. For each cSAC, there are defined ecological criteria that include water quality targets to protect the designated species. Stretches of the riverine cSACs in each catchment are failing to meet these and other water quality targets. The Environment Agency commissioned a study of each catchment to provide the underpinning scientific knowledge to allow it to deliver its statutory obligations under the Habitats Directive. SIMCAT river water quality models were produced and used to predict the water quality impacts resulting from a number of water quality planning scenarios aimed at achieving full compliance with the Habitats Directive and other national and EEC water quality targets. The results indicated that further controls on effluent discharges will allow the majority of targets to be met but other sources of pollution will also need to be controlled. The outcome of the study also recognised that water quality improvements alone will not necessarily produce the required improvement to the ecological interest features in each cSAC.     

Connecting the second exhaust-heat boiler to the operating first one under the conditions of flow circuits of combined-cycle plants with two gas-turbine units and one steam turbine

Problems arising with connecting the second exhaust-heat boiler to the first exhaust-heat boiler under load in the case of flow circuits of combined-cycle plants of type PGU-450 are considered. Similar problems exist for two-boiler single-turbine units of type PGU-325 and for two-boiler single-turbine units of traditional steampower plants with an output of 200–300 MW upon connection of the second furnace of a two-furnace boiler to the operating first furnace. Analysis of the temperature-induced stressed state and of the cyclic strength of thick-walled elements of the steam-water conduit of PGU-450 and of two-furnace boilers of two-boiler single-turbine units with an output of 200–300 MW (the check valve, the inlet header of the water economizer) is used for determining the steam temperature differences in the high-pressure conduits to the steam turbine and the order of connection of the second exhaust-heat boiler to the operating fist one. Modes of enabling a two-boiler single-turbine unit of a combined-cycle plant, which are most “rigid” from the standpoint of thermal strength, are determined. __________ Translated from élektricheskie Stantsii, No. 2, February 2006, pp. 11–17.     

Anaerobic biodecolorization of textile reactive anthraquinone and phthalocyanine dyebaths under hypersaline conditions.

The biological decolorization of two industrial, spent textile reactive dyebaths was investigated using a suspended-growth, halophilic mixed culture fed with glucose. Dyebath I contained mainly Reactive Blue 19 (RB19), an anthraquinone dye, whereas dyebath II contained mainly Reactive Blue 21 (RB21), a phthalocyanine dye. Batch assays under anaerobic conditions with the two neutralized dyebaths resulted in 87 and 37% extent of decolorization for dyebaths I and II, respectively. The rate of glucose utilization and the extent of acetate production were impacted in the presence of each dyebath as compared to the control culture. However, dyebath decolorization occurred despite moderate culture inhibition. Reuse of a biologically renovated RB19-containing dyebath in the dyeing process resulted in reproducible but not identical cotton fabric shades as compared to a standard dyeing (i.e., control) using fresh water. This difference is attributed to a variable degree of RB19 aggregation during the dyeing process and is not related to the efficiency of the biodecolorization process. Further improvement of the redyeing efficiency will lead to the development of an in-plant, closed-loop decolorization system resulting in significant water conservation and minimization of textile pollutants such as salt and dyes.     

Mechanical equipment of the Tashlyk pumped-storage hydroelectric station and Aleksandrovka hydro development of the Southern Ukraine power complex

Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 11, pp. 6–7, November, 1989.     

Modelling biological processes under anaerobic conditions through integrating titrimetric and off-gas measurements-applied to EBPR systems.

An innovative method for modelling biological processes under anaerobic conditions is presented and discussed. The method is based on titrimetric and off-gas measurements. Titrimetric data is recorded as the addition rate of hydroxyl ions or protons that is required to maintain pH in a bioreactor at a constant level. An off-gas analysis arrangement measures, among other things, the transfer rate of carbon dioxide. The integration of these signals results in a continuous signal which is solely related to the biological reactions. When coupled with a mathematical model of the biological reactions, the signal allows a detailed characterisation of these reactions, which would otherwise be difficult to achieve. Two applications of the method to the enhanced biological phosphorus removal processes are presented and discussed to demonstrate the principle and effectiveness of the method.     

No Chinese Capitalism without Property Rights

The speed with which communist China has embuaced markets has surprised Western analysis and observers, But Chinese economic progress will founder in corruption and inefficiency, argues Professor Steven Cheung of the university of Hong Kong, untess she insitutes a well-defined system of private property rights to safeguord investment and stimulate trade.     

Using Medicare data for short-run projections of the elderly population.

As the elderly population of the United States grows in absolute number and as a proportion of total population, accurate projections of that population become increasingly important for sound policy decisions. Cohort component techniques are typically used for state and local projections of the elderly population, but are often outdated or even nonexistent for many local areas. This paper suggests an alternative approach, based on Medicare data and simple projection techniques. Projections for several base periods and projection horizons are made for all states and for counties in Florida and are compared with actual Medicare enrollment. On the basis of these comparisons it appears that Medicare data and simple projection techniques can produce very useful short-run projections of the elderly population for states and local areas.