Setting-up a cost recovery system for the largest wastewater treatment plant in South-East Asia.

A tariff system has been set up for the largest wastewater treatment plant in South-East Asia, the Samut Prakarn Wastewater Treatment Plant south of Bangkok, which is currently under completion. Fully functional the plant will have a design capacity for 500,000 m3 per day and will service a combined residential and industrial area with approximately 600,000 residents and 2,300 factories. The tariff system, which includes a tariff model, is based on water consumption and BOD load. As background for setting the tariffs a comprehensive monitoring system including an industrial permitting system has been developed. The paper presents the background and rationale for setting up the system as well as the objective, scope and content of the tariff system and the industrial permit system. Further, the feasibility of introducing cost recovery systems, which is widely accepted in developing economies on the conceptual level and to some extent implemented at the legal and regulatory level, but has yet to be implemented at large, is discussed.     

Floc size distribution in a stirred suspension.

This paper focuses on the distribution of alumino-humic flocs found in a stirred suspension. Distributions were scaled using the transformation u = d/dL in which d is floc diameter and dL its arithmetic mean value and fitted by a gamma distribution. Flocs were treated as monofractal with solids mass concentration specified by C = A'rhos (d/do)D-3 in which A' is a packing coefficient, rhos the density of the floc solids, D the fractal dimension and do a reference size. It was shown that the overall solids concentration (M) complies with the dependence M proportional to NA'dDL-S(D) in which N is the number of flocs per unit volume and S(D) a distribution moment. Initial estimates of A' and D were obtained from analysis of floc sedimentation behaviour. From knowledge of the base parameters, the calculated value of M did not match the measured M and varied with shear. This was attributed to a kinematic influence on C over and beyond changes associated with the response of dL to shear. Issues of self-similarity were examined and it was concluded that distributions did not display strict self-similarity. Data are provided on the size distribution found in the flocculators of a treatment works at full scale.     

Bayesian MCMC Mapping of Quantitative Trait Loci in a Half-sib Design: a Graphical Model Perspective

Graphical models provide a powerful and flexible approach to the analysis of complex problems in genetics. While task-specific software may be extremely efficient for any particular analysis, it is often difficult to adapt to new computational challenges. By viewing these genetic applications in a more general framework, many problems can be handled by essentially the same software. This is advantageous in an area where fast methodological development is essential. Once a method has been fully developed and tested, problem-specific software may then be required. The aim of this paper is to illustrate the potential use of a graphical model approach to genetic analyses by taking a very simple and well-understood problem by way of example.     

Zero-valent iron treatment of RDX-containing and perchlorate-containing wastewaters from an ammunition-manufacturing plant at elevated temperatures.

The use of zero-valent iron for treating wastewaters containing RDX and perchlorate from an army ammunition plant (AAP) in the USA at elevated temperatures and moderately elevated temperature with chemical addition was evaluated through batch and column experiments. RDX in the wastewater was completely removed in an iron column after 6.4 minutes. Increasing the temperature to 75 degrees C decreased the required retention time to 2.1 minutes for complete RDX removal. Perchlorate in the wastewater was completely removed by iron at an elevated temperature of 150 degrees C in batch reactors in 6 hours without pH control. Significant reduction of perchlorate by zero-valent iron was also achieved at a more moderate temperature (75 degrees C) through use of a 0.2 M acetate buffer. Based on the evaluation results, we propose two innovative processes for treating RDX-containing and perchlorate-containing wastewaters: a temperature and pressure-controlled batch iron reactor and subsequent oxidation by existing industrial wastewater treatment plant; and reduction by consecutive iron columns with heating and acid addition capabilities and subsequent oxidation.     

Effective sludge solubilization treatment by simultaneous use of ultrasonic and electrochemical processes.

Sludge disintegration treatment by using simultaneously ultrasonic irradiation and electrolysis was investigated experimentally. A lab-scale diaphragm cell irradiated with ultrasound at a constant oscillating frequency of 20 kHz was used as a reactor. The batch experiments were carried out under different conditions of electric outputs of the ultrasonic generator, electric current for the electrolysis and different initial SS concentrations. A simultaneous treatment in the cathodic compartment without any chemical doses considerably facilitated the sludge solubilization, compared to the sonication alone. An increase in the electric current up to 400 mA under a constant ultrasonic density decreased the specific energy by 55% within the experimental range. The specific energy consumption was also reduced when the initial SS concentration increased. In addition, before carrying out the simultaneous treatment, a brief electrolysis was effective for further reduction of the specific energy and the acceleration of soluble COD generation.     

Using a weight-of-evidence approach for management of watersheds.

This research used a weight-of-evidence approach to evaluate sources of contaminants in a drinking water watershed that serves as part of the City of Boston's water supply. The approach incorporated land use analysis using GIS, sanitary surveys, traditional water quality monitoring and microbial source tracking (MST) tools. Case-study tributaries were selected based on elevated faecal coliform counts. Land use analysis and sanitary surveys were used to identify suspected microbial sources, including residential septic systems, agricultural animal operations, commercial/industrial operations and wildlife activity. Sampling sites were selected to hydrologically isolate potential contamination sources. Samples were collected seasonally over 1 year and analysed for traditional and MST parameters. Results demonstrated that both septic systems and a horse stable were contributing microbial loads in the first tributary. In the second tributary, septic systems from the townhouses were contributing microbial loads while a plant nursery was contributing organic matter. This evidence was used to evaluate best management practices to mitigate the contamination.     

Some Cracks in the Empire of Chance (Flaws in the Foundations of Reliability)

Making quantified statements about the uncertainty associated with the lifelength of an item is one of the most fundamental tasks of reliability assessment. Most practitioners routinely do this using one of the several available statistical techniques. The purpose of this paper is two-fold. The first is to give the user an overview of the key tenets of two of the most commonly used parametric approaches. The second is to point out that these commonly used approaches involve strategies that are either ad hoc, or are in violation of some of the underlying tenets. A method that is devoid of logical flaws can be proposed, but this method is difficult to implement. The user must therefore resign to using that technique against which the fewest objections can be hurled.     

Dividend Imputation and Shareholder Wealth: The Case of New Zealand

On April 1, 1988, New Zealand stopped the double taxation of dividends by implementing a full dividend imputation program. Because many believed that the tax advantage of debt had led to more highly leveraged firms subject to greater financial risk than was socially optimal, it was hoped the removal of incentives to finance with debt would result in a more efficient allocation of capital. The empirical results suggest that the shareholder wealth gain from dividend imputation was more than offset in firms with large debt levels. Moreover, an examination of debt ratios indicates debt levels declined in the post–imputation period.