Bio-layer management in anaerobic membrane bioreactors for wastewater treatment.

Membrane separation technology represents an alternative way to achieve biomass retention in anaerobic bioreactors for wastewater treatment. Due to high biomass concentrations of anaerobic reactors, cake formation is likely to represent a major cause of flux decline. In the presented research, experiments are performed on the effect of biomass concentration and level of gas sparging on the hydraulic capacity of a submerged anaerobic membrane bioreactor. Both parameters significantly affected the hydraulic capacity, with biomass exerting the most pronounced effect. After 50 days of continuous operation the critical flux remained virtually unchanged, despite an increase in membrane resistance, suggesting that biomass characteristics and hydraulic conditions determine the bio-layer formation rather than the membrane's fouling level. The concept of bio-layer management is introduced to describe the programmed combination of actions performed in order to control the formation of biomass layer over membranes.     

数据管理:电子商务数据的存储问题

许多情况说明，用于组织中数据存储的消费已经成爆炸状态。产生这种情况的主要因素是电子邮件和电子商务对数据的质量和数量的要求提高了，并且这种数据大部分是分散的、非结构性的，这就增加了对组织中数据管理的要求。本文是在澳大利亚进行的一次调查的基础上做出的，该调查是关于组织中如何处理数据增长和由于数据增长所带来的问题。调查的结果显示人们对该问题表现出高度的关注，同时显示出一种乐观的趋势，即技术将对未来出现的各种各样的问题提供解决方案。     

Quantifying and characterizing contemporary riparian sedimentation

Fluvial processes of erosion, sediment transport and deposition determine the changing form and sedimentary structure of naturally adjusting riparian zones. Riparian sediment storage has both scientific and management importance in relation to: (i) the quantities of sediment that are involved; (ii) the quality of the sediment; and (iii) the dispersal of biological materials, notably the vegetation propagules that are transported and deposited in association with the sediment. After discussing the significance of riparian sedimentation processes, this paper reviews methods for quantifying contemporary sediment deposition within water bodies and their margins. Methods for investigating contemporary riparian sedimentation are given particular emphasis, and the extent to which different methods provide comparable estimates and have been used to support the analysis of different physical and chemical properties of the sediment are outlined. The importance of the following are stressed: (i) selecting a sampling method that is suited to the sedimentation environment; (ii) incorporating careful cross‐calibration if measurements from different methods are to be combined; and (iii) replicating measurements to give more robust estimates if small traps are employed. It is concluded that artificial turf mats provide a useful design of sediment trap across a range of environmental conditions because: (i) their surface roughness reduces problems of sediment removal by flood waters or rainfall; (ii) their pliability permits installation on irregular surfaces; (iii) they can be securely attached to the ground with metal pins to resist high shear stresses from river flows; (iv) they are robust and light and so easily manipulated in the field and laboratory; (v) it is possible to fully recover the deposited sediment to accurately determine the amount of sediment deposited and to support a range of other analyses. Results are presented to illustrate how artificial turf mats can be used to estimate the quantity and quality of deposited sediment and to explore the associated deposition of viable seeds. This provides one example of the important hydroecological role of riparian sedimentation processes and of the potential for the development of innovative, interdisciplinary research on riparian sediment dynamics. Copyright © 2003 John Wiley & Sons, Ltd.     

FDI facilitated by agglomeration economies: evidence from manufacturing and services joint ventures in China

The open door policy of China’s economic reform since the 1980s has attracted heavy foreign direct investment (FDI) flows into China and especially to Guangdong (particularly the Pearl River Delta region, PRD) and induced significant economic growth during the past two decades. While there exist various classical theories of FDI in attempting to identify the determinants of FDI inflow and to explain the behavior of FDI flows, limited attention has been given from the perspective of agglomeration effects generated by a core-periphery (CP) relation.This paper intends to study the impacts of agglomerations on FDI inflows in the context of Krugman’s CP relation (1991) by investigating (1) the formation of a CP relation via gravity model analysis; (2) whether different types of industry FDI flows will respond differently in the CP-system, given agglomeration effects; and (3) whether FDI origin and firm scale matter in affecting FDI flows.A database consisting of a population frame of 37,742 firm-level manufacturing and services joint ventures investing in Guangdong in 1998 was used. Empirical results show that the agglomerations of the CP relation have affected FDI flow patterns. While both manufacturing and services FDI and sources of investment responded differently to the impacts, smaller firms were found more responsive to the CP-agglomeration settings regardless of FDI by industry type and by source. The significance and implications of the CP-system to further facilitate FDI in the region are discussed.     

Identifying “best” applicants in recruiting using data envelopment analysis

Selecting the most promising candidates to fill an open position can be a difficult task when there are many applicants. Each applicant achieves certain performance levels in various categories and the resulting information can be overwhelming. We demonstrate how data envelopment analysis (DEA) can be used as a fair screening and sorting tool to support the candidate selection and decision-making process. Each applicant is viewed as an entity with multiple achievements. Without any a priori preference or information on the multiple achievements, DEA identifies the non-dominated solutions, which, in our case, represent the “best” candidates. A DEA-aided recruiting process was developed that (1) determines the performance levels of the “best” candidates relative to other applicants; (2) evaluates the degree of excellence of “best” candidates’ performance; (3) forms consistent tradeoff information on multiple recruiting criteria among search committee members, and, then, (4) clusters the applicants.     

Evidence on agglomeration economies,diseconomies, and growth

Conventional urban economic analysis suggests that a local economy's size is closely related to a number of features, including levels of human capital and the availability of specialized inputs, which are likely to influence positively the rate at which it accumulates further economic activity. At the same time, urban theory also suggests that once cities reach a certain level of size, these agglomeration benefits begin to peter out, while diseconomies rise rapidly. Consequently, we should see an ‘inverted U‐shaped’ pattern of growth with respect to economic size—rates of growth first rise, then fall as size increases. This paper shows that, while such a pattern is largely absent from recent data on growth in metropolitan area population and employment, it emerges strikingly in county‐level data. Copyright © 2002 John Wiley & Sons, Ltd.     

Solutions to a combined problem of excessive hydrogen sulfide in biogas and struvite scaling.

The Woodman Point Wastewater Treatment Plant (WWTP) in Western Australia has experienced two separate problems causing avoidable maintenance costs: the build-up of massive struvite (MgNH4PO4. 6H2O) scaling downstream of the anaerobic digester and the formation of hydrogen sulfide (H2S) levels in the digester gas to levels that compromised gas engine operation and caused high operating costs on the gas scrubber. As both problems hang together with a chemical imbalance in the anaerobic digester, we decided to investigate whether both problems could be (feasibly and economically) addressed by a common solution (such as dosing of iron solutions to precipitate both sulfide and phosphate), or by using separate approaches. Laboratory results showed that, the hydrogen sulfide emission in digesters could be effectively and economically controlled by the addition of iron dosing. Slightly higher than the theoretical value of 1.5 mol of FeCl3 was required to precipitate 1 mol of dissolved sulfide inside the digester. Due to the high concentration of PO4(3-) in the digested sludge liquor, significantly higher iron is required for struvite precipitation. Iron dosing did not appear an economic solution for struvite control via iron phosphate formation. By taking advantage of the natural tendency of struvite formation in the digester liquid, it is possible to reduce the risk of struvite precipitation in and around the sludge-dewatering centrifuge by increasing the pH to precipitate struvite out before passing through the centrifuge. However, as the Mg2+/PO4(3-) molar ratio in digested sludge was low, by increasing the pH alone (using NaOH) the precipitation of PO4(3-) was limited by the amount of cations (Ca2+ and Mg2+) available in the sludge. Although this would reduce struvite precipitation in the centrifuge, it could not significantly reduce PO4(3-) recycling back to the plant. For long-term operation, maximum PO4(3-) reduction should be the ultimate aim to minimise PO4(3-) accumulation in the plant. Magnesium hydroxide liquid (MHL) was found to be the most cost-effective chemical to achieve this goal. It enhanced struvite precipitation from both, digested sludge and centrate to the point where more than 95% PO4(3-) reduction in the digested sludge was achieved.     

Modification of ASM3 for the determination of biomass adsorption/storage capacity in bulking sludge control.

The selector activated sludge (SAS) systems are known to prevent excessive growth of filamentous microorganisms responsible for bulking sludge, but these systems were hardly ever modelled. This study aimed to develop a model capable of predicting rapid substrate removal in the SAS systems. For this purpose, the Activated Sludge Model No. 3 (ASM3) was extended with three processes (adsorption, direct growth on the adsorbed substrate under aerobic or anoxic conditions). The modified ASM3 was tested against the results of batch experiments with the biomass originating from two full-scale SAS systems in Germany. The endogenous biomass was mixed with various readily biodegradable substrates (acetate, peptone, glucose and wastewater) and the utilisation of substrate (expresses as COD) and oxygen uptake rates (OURs) were measured during the experiments. In general, model predictions fitted to the experimental data, but a considerable number of kinetic (5) and stoichiometric (2) parameters needed to be adjusted during model calibration. The simulation results revealed that storage was generally a dominating process compared to direct growth in terms of the adsorbed substrate utilisation. The contribution of storage ranged from 65-71% (Plant A) and 69-92% (Plant B).