Anaerobic degradation of palm oil mill effluent (POME)

The biodegradation characteristics of palm oil mill effluent (POME) and the related microbial community were studied in both actual sequential anaerobic ponds in Malaysia and enrichment cultures. The significant degradation of the POME was observed in the second pond, in which the temperature was 35-37 °C. In this pond, biodegradation of major long chain fatty acids (LCFA), such as palmitic acid (C16:0) and oleic acid (C18:1), was also confirmed. The enrichment culture experiment was conducted with different feeding substrates, i.e. POME, C16:0 and C18:1, at 35 °C. Good recovery of methane indicated biodegradation of feeds in the POME and C16:0 enrichments. The methane production rate of the C18:1 enrichment was slower than other substrates and inhibition of methanogenesis was frequently observed. Denaturing gradient gel electrophoresis (DGGE) analyses indicated the existence of LCFA-degrading bacteria, such as the genus Syntrophus and Syntorophomonas, in all enrichment cultures operated at 35 °C. Anaerobic degradation of the POME under mesophilic conditions was stably processed as compared with thermophilic conditions.     

Effective degradation of para-chloronitrobenzene through a sequential treatment using zero-valent iron reduction and Fenton oxidation

In this study, zero-valent iron (ZVI) was used to pretreat para-chloronitrobenzene (p-CNB), and the major product was para-chloroaniline (p-CAN). By adding H(2)O(2) directly, further p-CAN degradation can be attributed to Fenton oxidation because ferrous ions (Fe(2+)) released during the ZVI corrosion could be used as an activator for H(2)O(2) decomposition. In the reduction process, the reduction efficiency of p-CNB as well as Fe(2+) concentration increased with increasing iron dosage and decreasing solution pH. Under the optimal conditions, 25 mg L(-1) of p-CNB could be transformed in 3 h when initial solution pH was 3.0 and ZVI dosage was 2.0 g L(-1). A sufficient amount of Fe(2+) (50.4 mg L(-1)) was obtained after the above reaction to activate H(2)O(2). In the Fenton process, the oxidization of p-CAN was also more effective in acidic conditions and it increased with increasing H(2)O(2) concentration. The control experiments showed that the sequential treatment was more effective than Fenton oxidation alone in treating p-CNB wastewater since the removal rate of total organic carbon (TOC) was improved by about 34%. It suggested that the amino function group is more susceptible to oxidative radical attack than the nitro function group. Therefore, sequential treatment using zero-valent iron reduction followed by Fenton oxidation is a promising method for p-CNB degradation.     

Tracing fine sediment sources in small mountain catchment

Fine sediment represents an important diffuse source pollutant in surface waters, due to its role in governing the transfer and fate of many substances, including nutrients, heavy metals, pesticides and other organic contaminants, and its influence on aquatic ecology. Therefore, catchment management strategies frequently need to include provision for the control of sediment mobilization and delivery. The sediment tracing concept provides a valuable framework for assisting the management and control of diffuse source sediment pollution by identifying the key sources and demonstrating the importance of intermediate storages and the likely impact of upstream mitigation strategies on downstream sediment and sediment associated contaminant fluxes. In this research, fine sediment sources were identified using tracing method. By field works, sediments were sampled from dam reservoir, different sources were also sampled. Fifteen tracers were first selected for tracing which are: The amounts of N, P, C, Cr, Co, Mg, K, Na, smectite, chlorite, illite, kaolinite, and two magnetic properties consisting of LOW Frequency Magnetic Susceptibility (X(LF)) and Frequency Dependent Magnetic Susceptibility (X(FD)). The samples were analyzed in the laboratory for these parameters and different statistical methods were applied to the data including Non-parametric Kruskal-Wallis Test and Stepwise Discriminant function analysis. The results provide important information on the relative importance of fine sediment sources to the reservoir sediments, which can be used to support model validation and the targeting of management and control strategies.     

Synthesis and structure-activity study of quaternary ammonium functionalized beta-cyclodextrin-carboxymethylcellulose polymers

Carboxymethylcellulose (CMC) and beta-cyclodextrin (beta-CD)-based polymers functionalized with two types of quaternary ammonium compounds (QACs), the alkaquat DMB-451 (N-alkyl (50% C14, 40% C12, 10% C10) dimethylbenzylammonium chloride) (DMD-451) named polymer DMB-451, and FMB 1210-8 (a blend of 32 w% N-alkyl (50% C14, 40% C12, 10% C10) dimethylbenzylammonium chloride and 48 w% of didecyldimethylammonium chloride) named polymer FMB 1210-8, were synthethized and characterized by Fourier transform infrared spectroscopy. The antimicrobial activities of these polymers against Eschericia coli were also evaluated at 25 degrees C in wastewater. The results have indicated that the polymer FMB 1210-8 possesses a high-affinity binding with bacterial cells that induces a rapid disinfection process. Moreover, in the same experimental conditions of disinfection (mixture of 1.0 g of polymer and 100 mL of wastewater), the polymer FMB 1210-8 has a higher antimicrobial efficiency (99.90%) than polymer DMB-451 (92.8%). This phenomenon might be associated to a stronger interaction with bacterial cells due to stronger binding affinity for E. coli cells and greater killing efficiency of the C10 alkyl chains QAC of polymer FMB 1210-8 to disrupt the bacterial cell membrane as compared to N-alkyl (50% C14, 40% C12, 10% C10) dimethylbenzylammonium chloride. Together, these results suggest that the polymer FMB 1210-8 could constitute a good disinfectant against Escherichia coli, which could be advantageously used in wastewater treatments due to the low toxicity of beta-CD and CMC, and moderated toxicity of FMB 1210-8 to human and environment.     

The fate of 14C-radiolabelled diclofenac and 4'-hydroxydiclofenac in membrane bioreactor treatment of wastewater

This study aimed at enhancing knowledge on the fate of diclofenac (DF), together with its main human metabolite 4'-hydroxydiclofenac (4'OHDF), during wastewater treatment by using a laboratory-scale membrane bioreactor (MBR). The reactor was fed continuously with non-radiolabelled diclofenac for a one month period prior to a single pulse of a 14C-radiolabelled solution of DF and 4'OHDF. The solution spike contained approximately 25% 4'OHDF and 65% DF, which corresponds to the ratio observed in municipal sewage, as well as traces of two other metabolites. The radioactivity was monitored for a total of twelve days in the various output streams. The calculation of the complete mass balance in the system demonstrated that the major part of the radioactivity left the reactor with the permeate (88.7%), while 2.1% was recovered in the excess sludge. Negligible amounts were recovered in the off-gas traps and on the membranes. Chromatographic analyses of effluent samples, by means of HPLC-MS coupled in parallel to a radiodetector, displayed a different pattern than the one of the spiked solution. It showed the occurrence of three additional metabolites.     

Samplinghelper a web-based tool to assess the reliability of sampling strategies in sewers and receiving waters

Sampling is a key step in the analysis of chemical compounds. It is particularly important in the environmental field, for example for wastewater effluents, wet-weather discharges or streams in which the flows and concentrations vary greatly over time. In contrast to the improvements that have occurred in analytical measurement, developments in the field of sampling are less active. However, sampling errors may exceed by an order of magnitude those related to analytical processes. We proposed an Internet-based application based on a sampling theory to identify and quantify the errors in the process of taking samples. This general theory of sampling, already applied to different areas, helps to answer questions related to the number of samples, their volume, their representativeness, etc. The use of the internet to host this application facilitates use of theoretical tools and raise awareness of the uncertainties related to sampling. An example is presented, which highlights the importance of the sampling step in the quality of analytical results.     

The use of CFD modelling to optimise measurement of overflow rates in a downstream-controlled dual-overflow structure

The measurement of the flow through complex combined sewer overflow structures in the frame of automated monitoring remains difficult. In this paper, a methodology based on the use of computational fluid dynamics (CFD) modelling in order to improve the instrumentation of a downstream-controlled dual-overflow structure is presented. The dual-overflow structure is composed of two combined sewer overflows (CSOs) connected by a rectangular channel and controlled by a downstream gate located at the entry of the Meyzieu waste water treatment plant (close to Lyon, France). The analysis of the CFD results provides: (i) a better understanding of the interaction between the two CSOs--that means the hydraulic operation, the hydrodynamic behaviour, the backflow effect--and (ii) an ability to optimise the location of the water depth sensor. The measured water depth is used to assess the overflow rate by means of a numerical relationship. Uncertainties are also assessed.     

Understanding urban residential end uses of water

The 'end use' of water is a breakdown of the total household water usage such as water used for toilets, showers, washing machines, taps, lawn watering, etc. Understanding end uses of water will enable water planners, water authorities and household owners determine where water is used/wasted, how much and how often. This paper describes the end uses of water from a number of single-family homes in Greater Melbourne, Australia. The study involves the analysis of water consumption data recorded at 5-s intervals from logged households collected by Yarra Valley Water in Melbourne in 2004. The study determines how much water is used for outdoor and indoor purposes in a single-family home in Melbourne and compares the water usage during winter and summer. Hourly patterns of major end uses of water are also developed. The aim of this study is to improve the understanding of the end uses of water and to assist where to focus water conservation efforts that would be most effective financially and environmentally, and be acceptable to everyone.     

Submersible microbial fuel cell for electricity production from sewage sludge

A submersible microbial fuel cell (SMFC) was utilized to treat sewage sludge and simultaneously generate electricity. Stable power generation (145 +/- 5 mW/m2, 470 omega) was produced continuously from raw sewage sludge for 5.5 days. The maximum power density reached 190 +/- 5 mW/m2. The corresponding total chemical oxygen demand (TCOD) removal efficiency was 78.1 +/- 0.2% with initial TCOD of 49.7 g/L. The power generation of SMFC was depended on the sludge concentration, while dilution of the raw sludge resulted in higher power density. The maximum power density was saturated at sludge concentration of 17 g-TCOD/L, where 290 mw/m2 was achieved. When effluents from an anaerobic digester that was fed with raw sludge were used as substrate in the SMFC, a maximum power density of 318 mW/m2, and a final TCOD removal of 71.9 +/- 0.2% were achieved. These results have practical implications for development of an effective system to treat sewage sludge and simultaneously recover energy.