Quantification and genotyping of Cryptosporidium spp. in river water by quenching probe PCR and denaturing gradient gel electrophoresis.

A new detection method was developed for the simultaneous quantification and genotyping of Cryptosporidium spp. in river water. Several modifications made to the US EPA Method 1623 enabled high and stable recovery of Cryptosporidium from 40 L of river water (geometric mean = 35%, standard deviation = 8.7%). Quenching probe PCR (QProbe PCR) was used to quantify the 18S rRNA gene of Cryptosporidium spp. This method could successfully detect single oocysts in a sample, and the lower quantitation limit was as low as 2.5 oocysts/sample. In addition, denaturing gradient gel electrophoresis (DGGE) followed by DNA sequencing was used to identify the genotypes. These methods were applied to detect Cryptosporidium spp. in the Koyama River, Japan. The positive ratio was 69% (11/16) with the maximum concentration of 59 oocysts/100 L. Seven genotypes including two novel ones were identified. These results showed that this detection method could provide valuable information on Cryptosporidium in river water, both in the concentration and in the genotypes, which is essential for the precise assessment of waterborne risk to human health.     

Characteristics of particle-associated PAHs in a first flush of a highway runoff.

Runoff monitoring of six rainfall events was carried out in a highway, Winterthur, Switzerland focusing on first flush (runoff volume up to 2.88 mm). Six runoff events were used to investigate the characteristics of particle-associated PAHs in first flush. The fine fraction (< 45 microm) had a relatively higher contribution than the coarse fraction. A significant contribution of the coarse fraction was observed at some periods when the runoff flow rapidly increased. Fluctuation of PAH content during a runoff event was significant in the coarse fraction and, in contrast, the PAH content in the fine fraction was less fluctuating. The weighted average PAH content in each event ranged from 17 to 62 microg/g in total SS, from 23 to 54 microg/g in the fine fraction and from 16 to 84 microg/g in the coarse fraction. The loading of particle-associated PAHs from the first flush of highway runoff ranged from 0.06 to 0.22 g/ha in a total of 12 PAH species.     

The characteristics and measuring technique of refractory dissolved organic substances in urban runoff.

It is considered that refractory dissolved organic substances have caused an increase in the COD concentration in Lake Biwa in recent years. We investigated the organic matter in the first flush of stormwater runoff from a road in the watershed area of the lake, and studied the possibility of improvement in the water environment from that aspect. After percolating the stormwater through soil, we analyzed organic substances fractionated by using GPC-TC. And we examined the effect of removal of organic substances by comparing the peak height before and after percolation. In the result of the experiments, we found that soil infiltration reduced the refractory dissolved organic substance and we successfully designed a system for a simple and easy experimental facility to treat urban runoff.     

Design of the experimental air curtain for the dam of the Krivoporozhsk hydroelectric station

Translated from Gidrotekhnicheskoe Stroitel'stvo, No. 10, pp. 11–13, October, 1992.     

Zero-valent iron treatment of RDX-containing and perchlorate-containing wastewaters from an ammunition-manufacturing plant at elevated temperatures.

The use of zero-valent iron for treating wastewaters containing RDX and perchlorate from an army ammunition plant (AAP) in the USA at elevated temperatures and moderately elevated temperature with chemical addition was evaluated through batch and column experiments. RDX in the wastewater was completely removed in an iron column after 6.4 minutes. Increasing the temperature to 75 degrees C decreased the required retention time to 2.1 minutes for complete RDX removal. Perchlorate in the wastewater was completely removed by iron at an elevated temperature of 150 degrees C in batch reactors in 6 hours without pH control. Significant reduction of perchlorate by zero-valent iron was also achieved at a more moderate temperature (75 degrees C) through use of a 0.2 M acetate buffer. Based on the evaluation results, we propose two innovative processes for treating RDX-containing and perchlorate-containing wastewaters: a temperature and pressure-controlled batch iron reactor and subsequent oxidation by existing industrial wastewater treatment plant; and reduction by consecutive iron columns with heating and acid addition capabilities and subsequent oxidation.     

Biofilm adaptation to sulfate reduction in anaerobic immobilized biomass reactors sujected to different COD/sulfate ratios.

Various aspects of biofilm adaptation to sulfate reduction in horizontal-flow anaerobic immobilized biomass (HAIB) reactors subjected to increasing sulfate concentrations and different COD/sulfate ratios are presented and discussed. Four bench-scale HAIB reactors filled with vegetal carbon (R1 and R2) and polyurethane foam matrices (R3 and R4) were utilized. Influent sulfate concentrations ranging from 500 to 3000 mg/L were applied at COD/sulfate ratios ranging from 5.0 to 1.7. Reactors R1 and R4 were operated with higher sulfate loads than those applied to R2 and R3. For the same COD/sulfate ratio, the highest sulfate reduction efficiency (approximately 80%) was displayed by the vegetal carbon reactor (R2) subjected to low sulfate loads. According to the results of our molecular biology analyses, the different support materials provided different biomass colonization conditions. The lowest diversity of sulfate-reducing bacteria was found in the HAIB filled with polyurethane foam matrices operating with high sulfate loads.     

Effective sludge solubilization treatment by simultaneous use of ultrasonic and electrochemical processes.

Sludge disintegration treatment by using simultaneously ultrasonic irradiation and electrolysis was investigated experimentally. A lab-scale diaphragm cell irradiated with ultrasound at a constant oscillating frequency of 20 kHz was used as a reactor. The batch experiments were carried out under different conditions of electric outputs of the ultrasonic generator, electric current for the electrolysis and different initial SS concentrations. A simultaneous treatment in the cathodic compartment without any chemical doses considerably facilitated the sludge solubilization, compared to the sonication alone. An increase in the electric current up to 400 mA under a constant ultrasonic density decreased the specific energy by 55% within the experimental range. The specific energy consumption was also reduced when the initial SS concentration increased. In addition, before carrying out the simultaneous treatment, a brief electrolysis was effective for further reduction of the specific energy and the acceleration of soluble COD generation.     

Endogenous Group Formation

While the rules governing the formation of groups engaging in collective action may have significant impact on group size and behavior of members, most experiments on public goods have been conducted with the subjects in exogenously fixed groups or of fixed sizes. We study endogenous formation of groups in a public‐goods provision game by allowing subjects to change groups under three sets of rules: free entry/exit, restricted entry with free exit, and free entry with restricted exit. We find that the rules governing entry and exit do have a significant impact on individual behavior and group‐level outcomes.     

Predicting the budgetary funding need of education in the three-year budget for 2008–2010

The paper presents a technique developed by the authors, which makes it possible to determine the necessary amount of financing for education at all the budget system levels for 2008-2010, based on the Russian average value of financing, taking into account the budget expenditures index for two variants of student population, i.e. the actual number of on-budget students and the number of students required to meet the economy’s need for trained workers. The technique was developed and the calculations were made on the basis of Russian long-term forecasts and the Russian three-year federal budget for 2008–2010.