构皮滩水电站泄洪洞优化设计

构皮滩水电站为满足2008年12月工程提前发电的需要,结合现有泄洪洞地质情况和施工情况对泄洪洞布置进行了专题研究,结果表明利用降低进口高程为550 m的泄洪洞和坝身放空底孔联合参与后期导流,可缓解2007年导流隧洞下闸封堵后大坝在2008年汛期施工的压力,为大坝施工增加了2个月左右的工期。     

非稳定井流模型的半解析解

为了提高非稳定渗流计算的计算精度 ,通过数学分析得到了水位传导系数随时间变化时 ,一类非稳定渗流井流模型的半解析解 ,并进行了计算比较     

纤维混凝土在水工建筑工程中的应用(上)

概述改性混凝土垢发展情况，介绍纤维混凝土在国内外水工建筑物上的应用实例，提出钢纤维增强钢筋混凝土水工建筑结构强度计算方法。包括受弯构件正截面强度，斜截面抗剪强度的计算；重点介绍了网状钢纤维增强混凝土（FOC）在水工建筑物上的应用，包括在渡槽，闸门，小型拦河坝，轻型岸型等工程上的应用实例，T新梁正斜截面的强度计算，板材承载力计算的方法。     

ETR Ⅱ-30调速器液压控制系统

ETRⅠ-30调速器是瑞士爱舍维斯工厂生产的具有PID调节规律的电液调速器。本文对其液压控制系统作了较详细的介绍,供有关人员参考。     

落脚河水电站引水发电系统的调节保证计算分析

水轮发电机组在运行中遇到启动、正常停机、增减负荷、事故甩负荷等工况变化时，经常会引起引水发电系统的水力过渡过程，所以在设计中必须通过调节保证计算以选择合适的导叶调节规律及其调节时间，从而优化压力引水系统的运行工况，使水电站的水工建筑物布置既经济合理又安全可靠。     

梯形断面水力计算的一种新方法

本文从梯形水力最优断面的基本思路出发，通过理论分析找到了梯形断面水力计算的一种新方法——即通过特征参数进行梯形断面的水力计算。     

水工隧洞内消能工的研究及应用进展

对于高水头、大流量的水电工程,以往的消能工具有一定的局限性,研究表明,把大面积遭受高速水流作用改为局部承受的消能方式,是高坝泄洪消能的一条有效途径。内消能工主要有孔板(洞塞)式消能工、旋流式消能工、消力井等3种形式。实践表明,内消能工对改善大坝下游水流流态,保护下游环境,保障下游边坡稳定等有积极作用,综合考虑,旋流式消能工具有较大优越性。对水工隧洞内部消能技术尚需开展进一步的研究与实践。     

液压启闭机CAD系统研究

简要介绍了在引进支撑环境下独立开发的专用ＣＡＤ系统应用软件－“液压启闭机ＣＡＤ系统”的运行环境、结构特点，主要功能模块的功能、开发过程中碰到的关键技术难点及解决办法。     

Coupling GIS with Hydrologic and Hydraulic Flood Modelling

Geographic Information Systems (GIS) have been recognised as a powerful means to integrate and analyse data from various sources in the context of comprehensive floodplain management. As part of this comprehensive approach to floodplain management, it is very important to be able to predict the consequences of different scenarios in terms of flooded areas and associated risk. Hydrologic and hydraulic modelling plays a crucial role and there is much to gain in incorporating these modelling capabilities in GIS. This is still a rather complex task and research is being done on the full integration of these models. Interfacing between these models and GIS may be a very efficient way of overcoming the difficulties and getting very good results in terms of engineering practice. This paper presents results based on the use of Intergraph GIS coupled with Idrisi GIS. Using these two systems substantially increased the flexibility of using GIS as a tool for flood studies. A lumped (XSRAIN) and a distributed (OMEGA) hydrologic models were used to simulate flood hydrographs. The well known HEC-2 Hydraulic model was used to compute flooded areas. These models were applied in the Livramento catchment with very good results. The computation of flooded areas for different flood scenarios, and its representation in GIS, can be used in the assessment of affected property and associated damages. This is a very useful GIS-based approach to floodplain management.     

SIMILARITY LAW OF FLUCTUATING PRESSURE WITHIN HYDRAULIC JUMP AREA

Through a series of model tests of five scales for 2-D free hydraulic jump, the da-ta of fluctuating pressure acting on the floor level within the hydraulic jump were obtained. Dur-ing the experiments, Froude number varied from 2.94 to 8.61, and Reynolds number rangedfrom 2×10~4 to 6×10~5. Experiment results indicate that the amplitude scale of fluctuating pres-sure is the length scale of model, i. e. P'=L, which agrees with gravity similarity law: Thefrequency scale of the fluctuating pressure is a unity i. e., f=1, which does not satisfy thegravity similarity law.