首页 | 本学科首页   官方微博 | 高级检索  
     

Mo对Ti(C,N)基金属陶瓷组织性能的影响
引用本文:王赛玉. Mo对Ti(C,N)基金属陶瓷组织性能的影响[J]. 黄石理工学院学报, 2009, 25(2): 1-5
作者姓名:王赛玉
作者单位:黄石理工学院,湖北,黄石,435003
基金项目:湖北省自然科学基金,黄石理工学院院级重点学科电气工程资助项目 
摘    要:研究了Mo含量对Ti(C,N)基金属陶瓷组织性能的影响。试样用常规粉末冶金方法制备,在材料中加入4~12wt%的Mo,分别于1430℃、1440℃、1450℃及1460℃真空烧结。测试了试样的抗弯强度及硬度,用扫描电镜观察其显微组织并做能谱分析,确定元素的相对含量。结果显示,当Mo含量为8wt%、烧结温度为1450℃时材料的综合性能最好。

关 键 词:Ti(C,N)基金属陶瓷  Mo含量  组织性能  扫描电镜

The Effect of Mo on the Microstructure and Mechanical Properties of Ti(C,N)-based Cermets
WANG Saiyu. The Effect of Mo on the Microstructure and Mechanical Properties of Ti(C,N)-based Cermets[J]. Journal of Huangshi Institute of Technology, 2009, 25(2): 1-5
Authors:WANG Saiyu
Affiliation:Huangshi Institute of Technology;Huangshi Hubei 435003
Abstract:The effect of Mo on the microstructure and mechanical properties of Ti ( C, N) - based eermets has been studied systematically in this paper. Different content of Mo from 4 - 14wt% was added into Ti( C, N) - based cermets. Specimens were fabricated by conventional powder metallurgy and vacuum sintered at the temperature of 1 430℃, 1 440℃, 1 450℃ and 1 460℃ individually. The microstructure and the analyse of energy spectrum were investigated by scanning electron microscope and the Mechanical properties such as transverse strength and hardness were measured. The results show that the integrated properties of transverse strength and hardness is the best when the content of Mo is 8wt% and the temperature of sintering is 1 450℃.
Keywords:Ti ( C, N) -based cermets  Mo content  microstructure and mechanical properties  SEM
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号