| 防撬锁监测器的方案设计 |
| |
| 引用本文： | 焦卫东,吴东平,倪孔松. 防撬锁监测器的方案设计[J]. 嘉兴学院学报, 2011, 23(6): 104-108. DOI: 10.3969/i.issn.1008-6781.2011.06.022 |
| |
| 作者姓名： | 焦卫东 吴东平 倪孔松 |
| |
| 作者单位： | 嘉兴学院机电工程学院,浙江嘉兴,314001 |
| |
| 摘 要： | 本监测器包括防技术性撬锁监测器和防强行侵入监测器两个模块．防技术性撬锁监测器主要基于对光电开关和接近开关的利用，并通过单片机定时计数功能的使用判断开锁信号．而强行侵入状态探测器主要由感知外界振动的敏感与转换元件组成．探测器发出异常电信号，经过辅助电路处理后形成触发电平，触发智能警示与报警器模块进行报警．
|
| 关 键 词： | 光电开关 接近开关 防盗报警 振动监测 |
Scheme Design for the Anti- picklock Monitor |
| |
| JIAO Wei-dong,WU Dong-pin,NI Kong-song. Scheme Design for the Anti- picklock Monitor[J]. Journal of Jiaxing College, 2011, 23(6): 104-108. DOI: 10.3969/i.issn.1008-6781.2011.06.022 |
| |
| Authors: | JIAO Wei-dong WU Dong-pin NI Kong-song |
| |
| Affiliation: | JIAO Wei-dong,WU Dong-ping,NI Kong-song(School of Mechanical and Electrical Engineering,Jiaxing University,Jiaxing,Zhejiang 314001) |
| |
| Abstract: | The monitor mentioned in this paper includes the anti-technical picklock monitor and the anti-invasive monitor.The anti-technical picklock monitor is mainly based on the use of the photoelectric switch and the proximity switch,and it uses the single-chip's timing and counting functions to judge the unlocking signal.And the anti-invasive monitor is mainly composed of the sensitive components and the conversion components to perceive the vibration.The detector sends out the electric signal,which then forms th... |
| |
| Keywords: | photoelectric switch proximity switch anti-theft alarm vibration monitoring |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
