| 基于有限元的动力电池电极翻边分析 |
| |
| 引用本文： | 金标. 基于有限元的动力电池电极翻边分析[J]. 价值工程, 2012, 0(15): 37 |
| |
| 作者姓名： | 金标 |
| |
| 作者单位： | 广东科技学院 |
| |
| 摘 要： | 为解决某动力电池铝电极极耳的翻边变形问题,采用Hypermesh及Abaqus有限元分析软件联合对其进行分析计算,结果表明:张力角越大,压辊半径越小,翻边变形越大,同时提出了实际可行的解决方案。
|
| 关 键 词： | 刚体 有限元分析 接触状态 |
The Flanging Analysis of the Electrode for Power Battery Based on FEM |
| |
| Jin Biao. The Flanging Analysis of the Electrode for Power Battery Based on FEM[J]. Value Engineering, 2012, 0(15): 37 |
| |
| Authors: | Jin Biao |
| |
| Affiliation: | Jin Biao(Guangdong University of Science & Technology,Dongguan 523083,China) |
| |
| Abstract: | To resolve the problem with the deformation of the aluminum electrode for a power battery,the finite element analysis software Hypermesh and Abaqus was used,it was shown that bigger the tensor angle is and smaller the radius is,bigger the flanging deformation is.The feasible method was put forward in the same time. |
| |
| Keywords: | rigid body finite element analysis contact state |
| 本文献已被 CNKI 等数据库收录！ |
|
