| 多功能家居智能窗设计 |
| |
| 引用本文： | 张建刚,赵路路. 多功能家居智能窗设计[J]. 价值工程, 2020, 0(1): 250-252 |
| |
| 作者姓名： | 张建刚 赵路路 |
| |
| 作者单位： | 1.宁夏理工学院电气信息工程学院 |
| |
| 摘 要： | 智能窗开发设计以单片机为控制芯片,为满足不同住户控制要求,选取使用不同传感器,实现检测环境湿度、室内可燃气浓度、光照强度。当室内可燃气体浓度超出正常值时,驱动电机将会开启窗户,同时蜂鸣器发出警报提醒主人空气异常;控制系统能够检测环境温湿度,在检测结果满足设定值时自动关闭窗户;当有人靠近房间会触发传感器动作,窗户会自动关闭并发出警报。
|
| 关 键 词： | 单片机 智能家居 传感器 异常报警 |
Multifunctional Home Smart Window Design |
| |
| ZHANG Jian-gang,ZHAO Lu-lu. Multifunctional Home Smart Window Design[J]. Value Engineering, 2020, 0(1): 250-252 |
| |
| Authors: | ZHANG Jian-gang ZHAO Lu-lu |
| |
| Affiliation: | (School of Electronic Information Engineering,Ningxia Institute of Science and Technology,Shizuishan 753000,China) |
| |
| Abstract: | The smart window development design uses a single-chip microcomputer as the control chip.In order to meet the control requirements of different residents,different sensors are selected to realize the detection of environmental humidity,indoor gas concentration,and light intensity.When the indoor flammable gas concentration exceeds the normal value,the drive motor will open the window,and the buzzer will send an alarm to remind the owner of the abnormal air;the control system can detect the ambient temperature and humidity,and automatically close the window when the detection result meets the set value;Approaching the room will trigger a sensor action,and the window will automatically close with an alarm. |
| |
| Keywords: | single-chip microcomputer smart home sensor abnormal alarm |
| 本文献已被 维普 等数据库收录！ |
|
