| 机组低负荷期间如何降低炉膛出口氮氧化物含量 |
| |
| 引用本文： | 陈磊.机组低负荷期间如何降低炉膛出口氮氧化物含量[J].价值工程,2014(1):41-42. |
| |
| 作者姓名： | 陈磊 |
| |
| 作者单位： | 中电投协鑫滨海发电项目筹建处,滨海224500 |
| |
| 摘 要： | 针对广东某电厂1000MW机组低负荷期间炉膛出口氮氧化物含量较高,有效的降低炉膛出口氮氧化物含量,并与国内同类型机组控制系统的设计进行比价,提出该系统更好的控制各参数的相应的建议。
|
| 关 键 词： | 炉膛出口 氮氧化物 降低 |
How to Reduce Nitrogen Oxide Content of Furnace Exit during Unit Low Load Period |
| |
| CHEN Lei.How to Reduce Nitrogen Oxide Content of Furnace Exit during Unit Low Load Period[J].Value Engineering,2014(1):41-42. |
| |
| Authors: | CHEN Lei |
| |
| Institution: | CHEN Lei ( China Power Investment Group and Xiexin Group Binhai Power Generation Project Arrangement and Construction Department, Binhai 224500, China ) |
| |
| Abstract: | In view of that the nitrogen oxide content of the 1000MW unit low load furnace exit is higher, in order to effectively reduce the nitrogen content of furnace exit, and with the comparison of the domestic design of the control system of same type unit, the paper puts forward the corresponding suggestions on the system to better control the various parameters. |
| |
| Keywords: | furnace exit nitrogen oxides reduce |
| 本文献已被 CNKI 维普 等数据库收录！ |
