| Lingo和1stOpt在结构优化设计中的应用比较 |
| |
| 引用本文： | 李姣玉,何建军. Lingo和1stOpt在结构优化设计中的应用比较[J]. 价值工程, 2012, 31(24): 9-10 |
| |
| 作者姓名： | 李姣玉 何建军 |
| |
| 作者单位： | 1. 株洲市第五中学,株洲,412000
2. 长沙理工大学汽车与机械工程学院,长沙,410115 |
| |
| 基金项目： | 国家自然科学基金项目(10872036);国家863课题(2008AA04Z118)资助 |
| |
| 摘 要： | 本文研究了位移、应力和稳定约束下桁架结构的尺寸优化设计问题。首先,基于Matlab的有限元分析和符号计算功能,采用近似方法得到位移约束的显式函数,再结合桁架结构应力约束的计算公式,构造优化设计的数学模型,最后,采用Lingo和1stOpt软件对该问题分别进行优化求解并予以比较。数值算例的结果表明,两种方法得到的优化结果一致,都能明显的减轻设计结构的重量,且方法简单,易实施,但两种软件各有优缺点。
|
| 关 键 词： | 应力约束 尺寸优化 显式函数 Lingo 1stOpt |
Comparison of Application of Lingo and 1stOpt in Structural Optimization Design |
| |
| LI Jiao-yu , HE Jian-jun. Comparison of Application of Lingo and 1stOpt in Structural Optimization Design[J]. Value Engineering, 2012, 31(24): 9-10 |
| |
| Authors: | LI Jiao-yu HE Jian-jun |
| |
| Affiliation: | ① LI Jiao-yu;② HE Jian-jun(①The Fifth Middle School of Zhuzhou,Zhuzhou 412000,China;②School of Automobile and Mechanical Engineering,Changsha University of Science and Technology,Changsha 410115,China) |
| |
| Abstract: | This paper investigates the size optimization of truss structure under displacement,stress and stability constraints.Firstly,based on finite element analysis and symbolic computation,explicit function of displacement constraints is obtained by approximate method.Secondly,combining with calculation formula of stress constraints of truss structure,mathematical model of optimization problem is established.Finally,optimization solution was carried out by Lingo and 1stOpt,and the results were compared by each other.The results show that solutions of the two methods are close to each other,and they both can reduce effectively the weight of design structure.Also the method is simple,and is easy to implement.The two software have their advantages and disadvantages. |
| |
| Keywords: | stress constraint size optimization explicit function Lingo 1stOpt |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
