共查询到20条相似文献,搜索用时 187 毫秒
1.
无(少)空气快速干燥器是根据陶瓷坯体干燥的基本特性,针对传统干燥技术及装备的缺点而开发研制的一种新型节能干燥设备。该技术成功地解决了复杂成形坯体干燥速度与干燥收缩之间的矛盾。与传统干燥设备的主要区别在于:干燥产品在一个密闭的箱体内进行;热风炉提供的热风,经过通风系统与干燥箱体形成内部循环,在运行过程中只有助燃风和少量的空气进入,通过热风的不断供应,保证了坯体快速干燥所需的温度和湿度,大大地降低了干燥能源的消耗,使干燥更加均匀,有效地提高了干燥合格率。该技术的主要创新性为:①研究开发了低温高湿干燥原理;②干燥箱体采用密闭的箱体结构;③采用热风闭路循环;④温、湿度自动控制;⑤干燥过程数据输入智能仪表内,可同时设置多条干燥级别;⑥整个干燥过程采用PLC自动程序控制,全过程实现自动化。 相似文献
2.
日前,安庆石化承担的"细旦腈纶纤维生产与试纺服务"项目,通过专家组结题验收。从2010年起,安庆石化开始与东华大学联合对细旦纤维成型工艺进行探索。他们确定了细旦腈纶的纺丝工艺,包括负拉伸率、牵伸倍数、凝固条件及致密化条件等;研究设计细旦腈纶纤维纺丝专用喷丝板,增加了孔的密度,设计了合理的孔分布;改进在线牵伸设备,使装置具备规模化生产能力。在细旦腈纶纤维小试的基础上,他们在纺丝生产线对应的二次滤机及纺丝烛型滤器上使用新型精 相似文献
3.
4.
介绍了制备含蛋白质的聚乙烯醇(PVA)纤维的冻胶纺丝工艺,讨论了蛋白质质量分数、成形、萃取和拉伸条件对纤维结构性能的影响.试验结果表明,研制的纤维具有蛋白质质量分数高,蛋白质在纺丝过程无损失和纤维机械性能好等特点. 相似文献
5.
袁玉红 《石油化工技术经济》2008,24(2):41-44
利用改性聚合体,配制原液,从纺丝原液及纺丝成形加工工艺两方面,具体分析了原液总固、原供纺温度、凝固浴温度和浓度、喷丝头负拉伸、喷丝速度等对纤维性能的影响,为选择合适的纺丝成形工艺提供依据。 相似文献
6.
上榜理由:优异的性能让聚苯硫醚纤维成为高温过滤材料的后起之秀,其熔融纺丝工艺与产品可设计优势,在气体除尘、PM2.5控制要求严格的将来,应用与市场前景值得期待。 相似文献
7.
王雁 《石油化工技术经济》2011,(5)
研究了在聚酯(PET)合成中用异丙醇(IPA)、己二酸(AA)、二甘醇(DEG)取代部分精对苯二甲酸(PTA)和乙二醇(EG)后对聚酯熔点范围的影响,探讨了熔点为110℃的低熔点聚酯(LMPET)切片干燥工艺、长丝纺丝工艺和LMPET/PET皮芯复合长丝纺丝工艺。研究表明,当IPA添加量在0~50%、AA添加量在0~20%、DEG添加量在0~10%范围内时,各组分的添加量与LMPET的初熔点和终熔点之间存在一定的线性关系。LMPET长丝采用低温纺丝生产工艺,螺杆温度应控制在在110~235℃;而就LMPET/PET皮芯复合长丝而言,宜采用LMPET低温熔融、高温纺丝,PET高温熔融、低温纺丝工艺。 相似文献
8.
牛奶蛋白纤维是一种新型蛋白质纤维,牛奶蛋白纤维以牛乳作为基本原料,经过脱水、脱油、脱脂、分离、提纯,使之成为一种具有线型大分子结构的乳酪蛋白;再与聚丙烯腈或聚乙烯醇高聚物采用高科技手段进行共混、交联、接枝或醛化,制备成纺丝原液;最后通过湿法纺丝成纤、固化、牵伸、干燥、卷曲、定形、短纤维切断(长丝卷绕)而成的。 相似文献
9.
顾文兰 《石油化工技术经济》2010,(4)
采用丙烯腈(AN)-丙烯酸甲酯(MA)-衣康酸(IA)三元共聚,NaSCN一步法湿法纺丝工艺路线进行聚丙烯腈(PAN)基大丝束原丝的工业化试验,确定了工艺条件,形成了工业化生产技术。与进口产品相比,大丝束原丝的金属杂质含量和均匀性指标偏高,需要对关键设备进行研究,以更好地满足生产需要。 相似文献
10.
11.
喷雾干燥在药品生产中应用较多,喷雾干燥塔分为离心式、气流式、压力式,传统的喷雾干燥法生产无菌原料药过程中在不溶性微粒、无菌、均一性、有效成分降解等方面存在质量风险,应该针对性地在设备设计、清洁、灭菌、无菌粉冷却、混粉、环境控制等方面对各种风险加以严格控制,才能有效地生产出高品质的无菌原料药。 相似文献
12.
This paper investigates the interactions between design students’ cognitive styles, as measured by Riding’s Cognitive Styles
Analysis, and performance in 2D drafting and design tasks in digital media. An empirical research revealed that Imager students
outperformed Verbalisers in both drafting and creativity scores. Wholist–Analytic cognitive style dimension was found to be
independent from drafting and design performance. The study suggests that examining the cognitive styles of students in Computer
Aided Design (CAD) education deserves further attention and may facilitate for improvements in learning processes. 相似文献
13.
Magnus Hultén Henrik Artman David House 《International Journal of Technology and Design Education》2018,28(2):451-470
In this article we focus on the co-creation of ideas. Through the use of concepts from collaborative learning and communication theory we suggest a model that will enable the cooperative nature of creative design tasks to emerge. Four objectives of the model are stated and elaborated on in the paper: that the model should be anchored in previous research; that it should allow for collaborative aspects of creative design to be accounted for; that it should address the mechanisms by which new ideas are generated, embraced and cultivated during actual design; and that it should have a firm theoretical grounding. The model is also exemplified by two test sessions where two student pairs perform a time-constrained design task. We hope that the model can play a role both as an educational tool to be used by students and a teacher in design education, but primarily as a model to analyse students’ cooperative idea generation in conceptual design. 相似文献
14.
熔体直纺生产涤纶POY25dtex/96f,探讨在现有的熔体直纺POY生产设备上纺丝温度、冷却形式、无风区长度、喷丝板的设计等工艺条件。通过对相关工艺的调整可以生产出性能优异的高强度极细旦POY25dtex/96f产品。 相似文献
15.
16.
17.
18.
Constance Winkelmann Winfried Hacker 《International Journal of Technology and Design Education》2011,21(4):395-407
The quasi-experimental field study with 174 advanced engineering students analysed the possibilities to assist the requirement
analysis when solving design problems. Technical check lists are in common practice for assisting the requirement analysis.
We wondered if a generic question answering system (GQAS) aiming at the ‘semantic relationships’ would offer an additional
benefit to the exhaustive identification of the requirements of a design task when a technical check list were offered at
the same time. Therefore, the students were asked to develop a list of requirements for the design of a machine collecting
windfall. Whereas one group was offered the technical check list together with the generic question answering system, the
other group was only offered the technical check list in assisting their task. The entire number of identified applicable
requirements is significantly higher for the group with the additional GQAS. The additional benefit of answering generic interrogative
questions holds for the majority of the individual categories of technical requirements. The benefit is explained with the
proven stimulation of meta-cognitive processes by means of systems of interrogative questions. Practically, the consideration
of generic procedures of problem solving in engineering design education may be recommended. 相似文献
19.
炉篦条是冶金设备烧结机上的一个重要零件,对铸件技术要求高,工作面不允许有铸造缺陷,采用消失模铸造生产炉篦条是一种先进、高效的生产工艺。针对原消失模铸造工艺经常出现的夹渣、夹砂等问题以及铸件报废的原因,在对原工艺认真分析的基础上对炉篦条铸件铸造工艺进行了优化:改变铸件浇冒口的设计,将原来的2个冒口向铸件长度方向的中间靠近;将铸件在浇注位置方向上的工作面朝下,以保证工作面的铸造质量;从管理、工艺实施和监督检查方面进行严格控制,消除气孔,保证涂料烘干,防止涂料返潮。通过优化铸造工艺,有效提高了生产效率,降低了生产成本。批量生产也证明了优化工艺性能稳定,产品质量可靠。 相似文献
20.
黄海鹰 《石油化工技术经济》2007,23(6):49-51
利用动设备状态监测软件开放性的集成功能,进行二次开发,设计编制数据变换程序系统,将来自分散型控制系统(DCS)的温度、电流、压力等动设备的过程参数引人到状态监测软件中,使故障分析工程师能利用多种现场数据综合判定设备的故障来源,更有效地做到预测维修。 相似文献